Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Кіріспе
Cobalt RaQ – Cobalt Networks, Inc. (кейін Sun Microsystems сатып алған) әзірлеген 1U тіреуге орнатылатын серверлік өнімдер желісі. Ол өзгертілген Red Hat Linux операциялық жүйесімен және серверді басқаруға арналған эксклюзивті GUI интерфейсімен жабдықталған. Алғашқы RaQ жүйелері MIPS RM5230 немесе RM5231 процессорларымен жабдықталған, бірақ кейінгі модельдерде AMD K6 2 чиптері, ал соңғы модельдерде Intel Pentium III процессорлары қолданылды. Cobalt RaQ – Cobalt Networks компаниясы шығарған екінші өнімдер желісі, ал біріншісі Cobalt Qube болды.
The Cobalt RaQ is a 1U rackmount server product line developed by Cobalt Networks, Inc. (later purchased by Sun Microsystems) featuring a modified Red Hat Linux operating system and a proprietary GUI for server management. The original RaQ systems were equipped with MIPS RM5230 or RM5231 CPUs but later models used AMD K6 2 chips and then eventually Intel Pentium III CPUs for the final models. The Cobalt RaQ was the second product line produced by Cobalt Networks; the first was the Cobalt Qube.
Сервердің ерекшеліктері
Төменде Cobalt RaQ түрлерінің тізімі және олардың сипаттамалары берілген. Модель CPU түрі Дәстүрлі CPU жылдамдығы Cobalt RaQ RM5230 150 МГц Cobalt RaQ 2 RM5231 250 МГц Cobalt RaQ 3 AMD K6 2 300 МГц Cobalt RaQ 4 AMD K6 2 450 МГц Cobalt RaQ XTR Intel Pentium III 733 МГц немесе 933 МГц (алғашқы шығарылым) 850 МГц немесе 1 ГГц (қайта шығарылым) Cobalt RaQ 550 Intel Pentium III 1 ГГц немесе 1.26 ГГц
Below is a list of Cobalt RaQ types, and their specs. Model CPU type Default CPU Speed Cobalt RaQ RM5230 150 MHz Cobalt RaQ 2 RM5231 250 MHz Cobalt RaQ 3 AMD K6 2 300 MHz Cobalt RaQ 4 AMD K6 2 450 MHz Cobalt RaQ XTR Intel Pentium III 733 MHz or 933 MHz (original release)850 MHz or 1 GHz (re release) Cobalt RaQ 550 Intel Pentium III 1 GHz or 1.26 GHz
OEM келісімі бойынша RaQ 2 құрылғылары Seagate NasRaQ түрінде де өндірілді. RaQ 3 және RaQ 4 модельдерінің RaQ 3i немесе RaQ 4i (SCSI қолдауы, екі Ethernet порты, PCI порты) және RaQ 4r (SCSI қолдауы, екі Ethernet порты және RAID) нұсқалары болды. Бұл модельдерде RAID бағдарламалық түрде, екінші қатты дискі үшін аналық платадағы екінші IDE арнасын пайдалана отырып жүзеге асырылды. Сондай-ақ, бір Ethernet адаптері, сыртқы SCSI порты жоқ және бір қатты дискісі бар "базалық" RaQ 4 моделі де болды. RaQ 3 Chili!soft ASP қолдауымен келді. Cobalt, Sun компаниясымен сатып алынар алдында Chili!soft компаниясын бірнеше ай бұрын сатып алды. RaQ 4, RaQ 3 жүктемесіне PHP қолдауын қосты. RaQ XTR төрт алмастырылатын қатты дискісі бар алғашқы 1U сервері болды. Айынып қалғаны, алғашқы нұсқасы аппараттық ақауларға тап болды және қайтарылып алынды. Бұл Cobalt сатып алынған кезде болды және XTR-ді қайта шығаруға 6 айдан астам уақыт кетті. Бұл үлкен сұранысқа ие болған жоқ. XTR интерфейсі сонымен қатар жаңа PHP негізделген Sausalito жүйесі мен RaQ 1–RaQ 4-ті қамтитын ескі Perl негізделген "ерекше соус" арасындағы "гибрид" болды. Symantec Veloci Raptor өрт қабырғалары құрылғылары да RaQ XTR аппараттық базасында құрылған. Бұл жүйелер қосымша 2 портты желілік картамен жабдықталған. Екі кіріктірілген желілік картасымен бірге жүйе төрт желілік интерфейске ие болды. RaQ 550 – Cobalt бөлімшесінің соңғы құрылғысы болды. Ол RaQ 4 жүктемесіне Java қолдауын қосты және Qube 3-тен бастау алған Sausalito UI-ді ғана қолданған алғашқы RaQ болды. Cobalt сатып алынғаннан кейін көп ұзамай Sun Cobalt өнімдерін тоқтатты және Cobalt өнімдерінің өмірлік циклы аяқталғанын (EOL) жариялады. Sun сонымен қатар RAQ1, RAQ4 және XTR үшін қолдау мен жаңартуды тоқтатарын және 2007 жылдың соңында RAQ550 және Qube3 үшін осы қызметтерді ұсынуды тоқтатарын мәлімдеді. 2003 жылдың 23 желтоқсанында Sun RAQ550/Sausalito бастапқы кодын BSD лицензиясы бойынша жариялады. Осы уақыттан бері әзірлеушілер Cobalt жобасын тірі ұстауға тырысып келеді. Мысалдар: жапондық жанкүйерлер тобымен ұсталып тұрған BlueQuartz, Cobalt RAQ бұрынғы кеңесшілерімен ұсталып тұрған BlueOnyx және RAQTweak (Cobalt RAQ кеңесшілері) мен бірнеше бұрынғы Sun/Cobalt инженерлері, мысалы, Тим Хокин және Патрик Балтц бастамасымен RackStar. Жаңа x86 негізделген RaQ-ларда стандартты Linux дистрибутивін орнату мүмкін. Linux 2.6 ядросына немесе одан жаңасына негізделген дистрибуцияны орнату үшін ROM бағдарламалық жасақтамасын ауыстыру қажет (RaQ-да стандартты BIOS жоқ) немесе тізбекті жүктеуді пайдалану керек. Бұл мақсатта CoLO қолданылуы мүмкін.
Under an OEM arrangement, RaQ 2 units were also produced by Seagate, in the form of the Seagate NasRaQ. There were variants of the RaQ 3 and RaQ 4 models known as the RaQ 3i or RaQ 4i (SCSI support, two Ethernet connectors, PCI connector), and the RaQ 4r (SCSI support, two Ethernet connectors, and RAID). RAID on these models was accomplished in software using a second IDE channel on the motherboard for the second hard drive. There was also a "bare bones" RaQ 4 model that had a single Ethernet adapter, no external SCSI, and a single hard drive. The RaQ 3 shipped with Chili!soft ASP support. Cobalt acquired Chili!soft a few months prior to being acquired by Sun. The RaQ 4 added PHP support to the RaQ 3 payload. The RaQ XTR was the first 1U server to have four removable hard drives. Unfortunately, the first release was plagued with hardware problems and was recalled. This happened during the Cobalt acquisition, and it took over 6 months to get the XTR re released. It was never a big seller. The XTR UI was also a "hybrid" between the newer PHP based Sausalito system and the older Perl based "special sauce" that powered the RaQ 1 RaQ 4. Symantec's Veloci Raptor firewall appliances were also based on the RaQ XTR hardware. These systems were equipped with an additional 2 port network card. Together with the two onboard network cards the system had four network interfaces. The RaQ 550 was the final appliance from the Cobalt division. It added Java support to the RaQ 4 payload, and was the first RaQ to use only the Sausalito UI originated in the Qube 3. Not long after the Cobalt acquisition, Sun terminated the Cobalt product, announcing the Cobalt range End of Life (EOL). Sun also announced it would discontinue all support and upgrades on the RAQ1 RAQ4 and XTR, and would stop offering these services for the RAQ550 and Qube3 in the end of 2007. On December 23, 2003, Sun released the RAQ550/Sausalito Source code under the BSD license. Ever since developers have tried to keep the Cobalt project alive. Examples are BlueQuartz, maintained by a group of Japanese fans, BlueOnyx maintained by former Cobalt RaQ consultants and RackStar, an initiative of RAQTweak (Cobalt RAQ consultants) and several ex Sun/Cobalt engineers such as Tim Hockin and Patrick Baltz. The installation of a standard Linux distribution on the newer x86 based RaQs is possible. The installation of a distribution based on the Linux 2.6 kernel, or newer, requires either the replacement of the ROM software (the RaQ does not have a typical bios), or the use of chain loading. CoLO can be used for this purpose.