Америкалық автоматтары тапаншасы – MAC 10

American machine pistol

30 round detachable box magazine (.45 ACP) and more commonly known as the MAC 10, is a compact, blowback operated machine pistol/submachine gun that was developed by Gordon Ingram in 1964. It is chambered in either .45 ACP or 9mm. A two stage suppressor by Sionics was designed for the MAC 10, which not only abates the noise created but makes it easier to control on full automatic (although it also makes the gun far less compact and concealable). Military Armament Corporation never used the "MAC 10" nomenclature in its catalogues or sales literature, but "MAC 10" is frequently used by Title II dealers, gun writers, and collectors. For a decade, the semi automatic pistol version of the weapon was forbidden in the U. S. under the assault weapons ban enacted by Congress in 1994.

The MAC 10 is built predominantly from steel stampings. A notched cocking handle protrudes from the top of the receiver, and turning the handle 90°, locks the bolt, and acts as an indicator the weapon is unable to fire. The MAC 10 has a telescoping bolt, which wraps around the rear face of the barrel. This allows a more compact weapon and balances the weight of the weapon over the pistol grip, where the magazine is located. The MAC 10 fires from an open bolt, and the light weight of the bolt results in a rapid rate of fire. In addition, this design incorporates a built in feed ramp as part of the trigger guard (a new concept at the time) and, to save on cost, the magazine design was recycled from the M3 Grease Gun. The barrel is threaded to accept a suppressor, which works by reducing the discharge's sound without attempting to reduce the speed of the bullet. This works well with the .45 ACP versions, as most loads are subsonic already, as opposed to special, low powered subsonic loads usually required for suppressed 9mm weapons. At the suggestion of the United States Army, the suppressor also acts as a foregrip to inhibit muzzle rise when fired. Ingram added a small bracket with a small strap beneath the muzzle to aid in controlling recoil during fully automatic fire. The original rate of fire for the MAC 10 in .45 ACP is approximately 1090 rounds per minute. That of the 9mm is approximately 1250, and that of the smaller MAC 11 in .380 ACP is 1500 rounds per minute. Noting the weapon's poor accuracy, in the 1970s, International Association of Police Chiefs weapons researcher David Steele described the MAC series as "fit only for combat in a phone booth".

The primary reason for the original M10 finding recognition was its revolutionary sound suppressor designed by Mitchell WerBell III of Sionics. This suppressor has a two stage design, with the first stage being larger than the second. This uniquely shaped suppressor gives the MAC 10 a very distinctive look. It is also very quiet, to the point that the bolt can be heard cycling, along with the suppressed report of the weapon's discharge, though only if subsonic rounds are used (standard .45 ACP rounds are subsonic). The suppressor, when used with a Nomex cover, creates a place to hold the firearm with the secondary hand, making it easier to control. During the 1970s, the United States placed restrictions on the export of suppressors, and a number of countries canceled their orders as the effectiveness of the MAC 10's suppressor was one of its main selling points. This was one factor that led to the bankruptcy of Military Armament Corporation, another being the company's failure to recognize the private market. The original Sionics suppressor is 11.44inches in length, 2.13inches in overall diameter, and weighs 1.20 pounds.

While the original M10 was available chambered for either .45 ACP or 9mm, the M10 is part of a series of machine pistols, the others being the MAC 11/M 11A1, which is a scaled down version of the M10 chambered in .380 ACP (9×17mm); and the M 11/9, which is a modified version of the M 11 with a longer receiver chambered in 9×19mm, later made by SWD (Sylvia and Wayne Daniel), Leinad and Vulcan Armament. Law enforcement bureaucracies such as the Minnesota Bureau of Criminal Apprehension (BCA) consider MAC 11 variants such as the Leinad PM 11 to be part of the "MAC 10 class pistol". In the United States, machine guns are National Firearms Act items. As the Military Armament Corporation was in bankruptcy, a large number of incomplete sheet metal frame flats were given serial numbers and then bought by a new company, RPB Industries. Some of the previously completed guns, which were already stamped with MAC, were then stamped with RPB on the reverse side, making it a "double stamp" gun. RPB Industries made many open bolt semi automatic and sub machine guns before the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) seized roughly 200 open bolt semi autos during the drug wars of 1981. The BATFE insisted that all future semi automatic firearms were to be manufactured with a closed bolt design as the open bolt semi automatics were considered too easy to illegally convert to full automatic operation. There are several carbine versions of the M 11/9 and Cobray and SWD manufactured a smaller version chambered in .380 ACP as a semiautomatic pistol called the M 12. Today, while the civilian manufacture, sale and possession of post 1986 select fire MAC 10 and variants is prohibited, it is still legal to sell templates, tooling and manuals to complete such conversions. These items are typically marketed as being "post sample" materials for use by Federal Firearm Licensees for manufacturing/distributing select fire variants of the MAC 10 to law enforcement, military and overseas customers.

The BXP is a 9mm submachine gun developed in the mid 1980s by the South African company Mechem (currently a division of Denel, formerly under ARMSCOR) and brought into production in 1984. Due to international arms embargoes of Apartheid South Africa, the country was forced to design and manufacture their own weapons. The weapon was intended for use by security forces. The manufacturing rights have changed hands several times, passing from Mechem to Milkor Marketing and later to Truvelo Armoury, the current manufacturer (as of lc=y).

The Cobra carbine is a semi automatic firearm of Rhodesian origin manufactured during the Rhodesian Bush War Era as a self defense weapon for farmers and is chambered for the 9×19mm Parabellum round. The layout of this weapon is somewhat based on the Uzi submachine gun.

The Pistola Ametralladora Patria is a close copy of the MAC 10 and features a cooling jacket/barrel extension much like the South African BXP. It was developed by Major Luis Ricardo Dávila, of the Argentine Air Force, and protected by national Patent n° 220494/5/6/7 on 20/08/1980. It uses 9mm rounds for easy transportation and can be operated in either hand. A similar earlier Argentine weapon based on the MAC 10 was also designed in 1977 by manufacturer Domingo Matheu, the Pistola Ametralladora MPA.

The Enarm MSM (Mini Sub Metralhadora or Mini Submachine Gun) was a submachine gun of Brazilian origin based on the Uzi and MAC 10 weapons, made by ENARM. It was chambered in the 9×19mm Parabellum round and also came with a foregrip. Although the weapon performed well in trials, it was discontinued due to the company disbanding due to "internal disruptions". in the 1970s. They only accept 9×19mm Uzi magazines and are equipped with a classic folding or a special fixed polymer stock.