Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
Джон Мозес Браунинг жасаған пистолет патроны.
Pistol cartridge designed by John Moses Browning
.380 ACP (Automatic Colt Pistol, сондай-ақ .380 Auto, .380 Automatic немесе 9×17mm) – атыс қаруын жасаушы Джон Мозес Браунинг әзірлеген, жиексіз, тік қабырғалы пистолет патроны. Патрон қаптама аузында бекітіледі. Ол 1908 жылы Colt компаниясы өздерінің жаңа Colt Model 1908 қалталық, шайбасыз, жартылай автоматты пистолеті үшін ұсынды және содан бері өзін-өзі қорғау үшін танымал болып, көптеген қол пистолеттерінде (әдетте кішкентай қаруларда) кеңінен қолданылып келеді. .380 ACP-нің басқа да атаулары: .380 Auto, 9×17mm, 9mm Browning, 9mm Corto, 9mm Kurz, 9mm Short және 9mm Browning Court (C.I.P. белгілемесі). Оны .38 ACP-мен шатастыруға болмайды. .380 ACP патронның диаметрімен аталмайды, себебі .380 ACP патронының пулясының нақты диаметрі .355 дюймды құрайды.
The .380 ACP (Automatic Colt Pistol, also known as .380 Auto, .380 Automatic, or 9×17mm), is a rimless, straight walled pistol cartridge developed by firearms designer John Moses Browning. The cartridge headspaces on the mouth of the case. It was introduced in 1908 by Colt, for use in its new Colt Model 1908 pocket hammerless semi automatic, and has been a popular self defense cartridge ever since, seeing wide use in numerous handguns (typically smaller weapons). Other names for .380 ACP include .380 Auto, 9×17mm, 9mm Browning, 9mm Corto, 9mm Kurz, 9mm Short, and 9mm Browning Court (which is the C. I. P. designation). It should not be confused with .38 ACP. The .380 ACP does not strictly conform to cartridge naming conventions, named after the diameter of the bullet, as the actual bullet diameter of the .380 ACP is .355 inches.
Дизайн
.380 ACP патроны Браунингтің алдыңғы .38 ACP дизайнынан туындады, ол маргиналды ғана күштірек болды. .380 ACP нағыз жиексіз етіп жасалған, дәлдігін арттыру үшін жиегінің орнына гильзаның аузында бекітіледі. Бұл салыстырмалы түрде аз қуатты конструкциялар, .380 ACP-ден күштірек оқтарды ату үшін қажет болатын ұңғыманы құлыптау механизмі жоқ, инерциялық пистолеттер үшін көзделген. Инерциялық принципті пайдалану арқылы конструкцияны қарапайымдастыруға және құнын төмендетуге болады, себебі ұңғыманы құлыптау механизмі қажет емес, өйткені сырғанақтың (слайдтың) массасы мен кері серіппесінің күші, патронның салыстырмалы түрде төмен итеру күшіне байланысты, патронның кері серпіліс энергиясын сіңіруге жеткілікті. Инерциялық принцип сонымен қатар ұңғыманы рамаға бекітуге мүмкіндік береді, бұл дәлдікті арттырады, дәстүрлі қысқа серпілісті пистолеттерден өзгеше, оларда сырғанақтың және ұңғыманың жиналысын ашу үшін ұңғыма еңкеюі керек. Инерциялық жүйенің кемшілігі – ол патронның кері серпілісіне қарсы тұру үшін сырғанақтың (слайдтың) белгілі бір массасын қажет етеді. Патронның қуаты қаншалықты жоғары болса, сырғанақтың (слайдтың) инерциясы кері серпілісті қауіпсіз сіңіруі үшін құралы соншалықты ауыр болуы керек, яғни белгілі бір калибрдегі стандартты инерциялық пистолет, серпілісті пайдаланатын теңдес қарудан ауыр болады. Инерциялық қарулар .380 ACP-ден үлкен калибрде де жасалуы мүмкін, бірақ сырғанақтың (слайдтың) қажетті салмағы мен серіппенің күші осы таңдауды азырақ танымал етеді. .380 ACP-нің төмен қуаты құлыптау механизмін қажет етпесе де, .380 ACP патронына арналған бірнеше құлыпталған ұңғымалы пистолеттер бар, мысалы Remington Model 51, Kel Tec P3AT және Glock 42; олардың үшеуі де инерциялық .380 ACP қаруларынан жеңіл болу үшін жасалған. Сондай-ақ, салыстырмалы түрде кішкентай (инерциялық) автоматтары бар, мысалы Ingram MAC 11 және чехиялық vz. 83.
The .380 ACP cartridge was derived from Browning's earlier .38 ACP design, which was only marginally more powerful. The .380 ACP was designed to be truly rimless, and headspaces on the case mouth instead of the rim for better accuracy. These relatively low powered designs were intended for blowback pistols which lacked a barrel locking mechanism, which is often required for any handgun firing a round more powerful than a .380 ACP. Using blowback operation, the design can be simplified, and lowered in cost; a locking mechanism is unnecessary, since the mass of the slide and strength of the recoil spring are enough to absorb the recoil energy of the round, due to the round's relatively low bolt thrust. Blowback operation also permits the barrel to be permanently fixed to the frame, which promotes accuracy, unlike a traditional short recoil operation pistol, which requires a tilting barrel to unlock the slide and barrel assembly when cycling. A drawback of the blowback system is that it requires a certain amount of slide mass to counter the recoil of the round used. The higher the power of the round, the heavier the slide assembly has to be in order for its inertia to safely absorb the recoil, meaning that a typical blowback pistol in a given caliber will be heavier than an equivalent recoil operated weapon. Blowback weapons can be made in calibers larger than .380 ACP, but the required weight of the slide and strength of the spring makes this an unpopular option. Although the low power of the .380 ACP does not require a locking mechanism, there have been a number of locked breech pistols chambered in .380 ACP, such as the Remington Model 51, Kel Tec P3AT and Glock 42; all three being designed to be lighter than blowback operated .380 ACP weapons. There have also been some relatively diminutive (blowback operated) submachine guns, such as the Ingram MAC 11 and the Czech vz. 83.
Пайдаланушылар
.380 ACP 1908 жылы АҚШ-та және 1912 жылы Еуропада пайда болғаннан бері кеңінен қолданылып келеді. Кейіннен екінші дүниежүзілік соғысқа дейін кем дегенде бес еуропалық елдің әскерлері оны стандартты тапанша патроны ретінде қабылдады: Чехословакия (Vz.38), Венгрия (FEMARU 37M) және Италия (барлығы отандық конструкцияларды пайдаланды), сондай-ақ Нидерланды мен Югославия (екеуі де FN Model 1922-ні қабылдады). Бұл калибрдегі жүздеген мың пистолетті басып алған немесе сатып алған Германия да оны кеңінен қолданды. Неміс офицерлері арасында Walther PPK сияқты неміс коммерциялық үлгілері өте танымал болды. Италия армиясы Beretta M1934-ті пайдаланды, бірақ Италия әуе күштері мен теңіз күштері Beretta M1935-ті қабылдағанда 7.65 мм / .32 ACP патронын қолдануын жалғастырды. .380 ACP екінші дүниежүзілік соғысқа дейін .32 ACP пистолеттерімен салыстырғанда орташа қуатты қызметтік тапанша патроны саналды, бірақ соғыстан кейін оны әскери қызметте ұзақ уақыт қолдаған елдердің саны азайып кетті (1960 жылдары НАТО стандарттаудан кейін оны 9×19 мм Parabellum алмастырды). 1970 жылға дейін Еуропа полиция күштері оны кеңінен пайдаланды, содан кейін оны осы нарықта қуаттырақ 9×19 мм тапаншалар ығыстыра бастады. Ол әдетте кішкентай және жасыруға оңай болған қарулар үшін қосымша қару ретінде қолданылады (өте аз "мини-пистолеттер" .380 ACP-ден үлкен калибрде жасалады, ал олардың кейбіреулері жақында ғана жасалған), сондай-ақ жеке қорғануға арналған патрон ретінде азаматтық нарықта танымал. .380 ACP патроны жасырын тапаншалар үшін өзін-өзі қорғау жағдайында таңдау ретінде қолайлы. Defense Distributed компаниясының "Wiki Weapon" жобасында оқтан 3D принтерде атыс қаруын жасау үшін осы патрон қолданылды.
The .380 ACP has experienced widespread usage since its introduction in the United States (1908) and in Europe (1912). It was later adopted by the armies of at least five European nations as their standard pistol cartridge before World War II; Czechoslovakia (Vz.38), Hungary (FEMARU 37M), and Italy, all of whom used domestic designs, as well as The Netherlands and Yugoslavia, both of whom adopted the FN Model 1922. It was also used extensively by Germany, who captured or purchased hundreds of thousands of pistols in this caliber during World War II. Popular German built commercial models, such as the Walther PPK were very popular with German officers. The Italian Army used the Beretta M1934, but the Italian Air Force and Navy stuck with the 7.65mm/.32 ACP when they adopted the Beretta M1935. While the .380 ACP was considered to be a moderately powerful service pistol round before World War II when compared to the .32 ACP pistols it replaced, few nations retained it as a military service cartridge for very long after the war (it was eventually replaced by the more powerful 9×19mm Parabellum after NATO standardization in the 1960s). It was widely used by police forces in Europe until the 1970s, when more powerful 9×19mm handguns began to replace it in this market. It does find some use as a backup gun due to the generally small and easily concealable size of the weapons that chambered it (very few "mini pistols" are made in calibers larger than .380 ACP, and those few that are, are recent developments), and is popular on the civilian market as a personal defense round. The .380 ACP round is suitable for self defense situations as a choice for concealed carry pistols. It was the round used in Defense Distributed's "Wiki Weapon" project to successfully 3D print a firearm.