Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
Патрон ұстайтын цилиндрі бар қару,
қару
Firearm with a cylinder holding cartridges
the firearm
Револьвер – кем дегенде бір оқпанды және ату үшін бірнеше патрон сақтайтын айналмалы цилиндрді пайдаланатын, қайта зарядталатын қол қаруы. Көптеген револьвер үлгілері алты патронға дейін сыйымды, сондықтан қайта зарядтау қажет болғанда оларды жиі «алты атар» немесе «алты тапанша» деп атайды. Айналмалы цилиндр механизмі болғандықтан, оларды «дөңгелек қару» деп те атай берушілік. Оқ атпас бұрын, револьвердің тетігін кергенде цилиндр ішінара бұрылады, цилиндрдің бірінші патрон ұясы оқпанмен дәл келіп, оқтың оқпан арқылы атылуына мүмкіндік береді. Көптеген револьверлердегі тетік қолмен жұмыс істейді және оны пайдаланушы бас бармағымен тікелей кері тартып (бір реттік әрекетте), немесе тетіктің күшімен ішкі байланыс арқылы (екі реттік әрекетте), немесе екеуінің біріктірілген түрінде (екі реттік/бір реттік әрекетте) кері тартуға болады. Цилиндрдегі әрбір патрон ұясынан ретті түрде өте отырып, револьвер пайдаланушыға қаруды қайта зарядтауға дейін бірнеше рет оқ атуға мүмкіндік береді, бұл әр оқтан кейін қайта зарядтауды қажет ететін ескі бір оқпанды қарулардан өзгеше. Кейбір сирек револьвер үлгілері алдыңғы оқтың кері соққысын пайдаланып, тетікті автоматты түрде керіп, келесі патрон ұясын орналастыра алады, бірақ бұл өзіндік зарядталатын револьверлер (техникалық тұрғыдан жартылай автоматты болғанымен, автоматты револьверлер деп аталады) кеңінен таралған емес. Жарым-жартылай автоматты пистолеттерге қарағанда ыңғайлылығы мен патрон сыйымдылығы төмен болғанымен, револьверлер АҚШ құқық қорғау органдары мен күзетшілер арасында қосымша және қызметтен тыс қол қаруы ретінде танымал және АҚШ жеке секторда қорғаныс, спорттық және аң аулау қаруы ретінде жиі қолданылады. Белгілі револьвер үлгілеріне Colt 1851 Navy Revolver, Webley, Colt Single Action Army, Colt Official Police, Smith & Wesson Model 10, «Жылаған Гарри» фильмімен танымал Smith & Wesson Model 29, Nagant M1895 және Colt Python жатады. Көптеген револьверлік механизмдер қол қаруы болғанымен, басқа да қару түрлерінде де револьверлік механизм қолданылуы мүмкін. Оларға кейбір мылтықтар, оқпандар, граната тастағыштар және автоматты зеңбіректер жатады. Револьверлік қарулар Гатлинг стиліндегі айналмалы қарулардан өзгеше, себебі револьверде тек патрон ұялары айналады, ал айналмалы қаруда өз оқпандары бар бірнеше толық қарулар ортақ патронмен айналады.
A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers (each holding a single cartridge) for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters or sixguns. Due to their rotating cylinder mechanism, they may also be called wheel guns. Before firing, cocking the revolver's hammer partially rotates the cylinder, indexing one of the cylinder chambers into alignment with the barrel, allowing the bullet to be fired through the bore. The hammer cocking in nearly all revolvers are manually driven and can be cocked either by the user using the thumb to directly pull back the hammer (as in single action), or via internal linkage relaying the force of the trigger pull (as in double action), or both (as in double action/single action). By sequentially rotating through each chamber, the revolver allows the user to fire multiple times until having to reload the gun, unlike older single shot firearms that had to be reloaded after each shot. Some rare revolver models can utilize the blowback of the preceding shot to automatically cock the hammer and index the next chamber, although these self loading revolvers (known as automatic revolvers, despite technically being semi automatic) never gained any widespread usage. Although largely surpassed in convenience and ammunition capacity by semi automatic pistols, revolvers still remain popular as back up and off duty handguns among American law enforcement officers and security guards and are still common in the American private sector as defensive, sporting, and hunting firearms. Famous revolver models include the Colt 1851 Navy Revolver, the Webley, the Colt Single Action Army, the Colt Official Police, Smith & Wesson Model 10, the Smith & Wesson Model 29 of Dirty Harry fame, the Nagant M1895, and the Colt Python. Though the majority of weapons using a revolver mechanism are handguns, other firearms may also have a revolver action. These include some models of rifles, shotguns, grenade launchers, and autocannons. Revolver weapons differ from Gatling style rotary weapons in that in a revolver only the chambers rotate, while in a rotary weapon there are multiple full firearm actions with their own barrels which rotate around a common ammunition feed.
Тарих
Атыс қаруын дамытуда маңызды шектеу фактор – қаруды атып болғаннан кейін қайта зарядтауға кеткен уақыт болатын. Пайдаланушы қайта зарядталып жатқанда қару қолсыз болып, қарсыласына шабуыл жасауға мүмкіндік беретін. Атыс жылдамдығын арттыру мәселесіне бірнеше тәсілдер ұсынылды, алғашқылары көп ұңғылы қаруларды қамтыды, олар қайта зарядтамай екі немесе одан да көп оқ атуға мүмкіндік берді. Кейінгі қаруларда бір осьте айналатын бірнеше ұңғылар болды. Лондон мұнарасында сақталатын бір ұңғылы, төрт камералы шұңғырлы револьвердің 15 ғасырда ойлап табылғаны есептеледі. Венециядағы үш ұңғылы шұңғырлы тапаншаның 1548 жылға дейін жасалғаны белгілі. 16 ғасырдың соңында Қытайда Чжао Шичжэнь бес ұңғылы мылтық револьвері – Сюнь Лэй Чунды ойлап тапты. Сол кезде Германияда қазіргі заманғы револьвердің алғашқы үлгілері жасалды. Бұл қарудың бір ғана ұңғысы болды, оның ішінде оқ пен доп сақталатын айналатын цилиндр орналасқан. Көп ұзамай оларды көптеген еуропалық қару жасаушылар түрлі дизайн мен конфигурацияларда шығара бастады. Дегенмен, бұл қарулар күрделі, пайдалану қиын және жасауға тым қымбат болғандықтан, кеңінен таралмады. 19 ғасырдың басында "бұрыш қораптары" деп аталатын көп ұңғылы қол қарулары танымал болды. Алғашқыда олар ұңғыдан зарядталатын, бірақ 1837 жылы бельгиялық қаругер Мариетт саңылаусыз бұрыш қорабын, сақиналы триггермен және бұрап шығарылатын ұңғылармен ойлап тапты. 1836 жылы америкалық Сэмюэл Колт револьверді патенттеді, ол револьвердің кеңінен қолданылуына әкелді. Колттың айтуынша, ол револьвер туралы идеяны теңізде жүргенде ойлап тапты, оған капистаннан шабыданды, онда тісті дөңгелек және құлыптағыш механизмі болды, оның нұсқасы оның қаруларында балғаны басып цилиндрді айналдыру үшін қолданылды. Бұл әрбір оқтың орнын анықтаудың сенімді және қайталанатын тәсілін қамтамасыз етті және цилиндрді қолмен айналдыру қажеттілігін жойды. Револьверлер Колттың сатушы ретіндегі қабілетіне байланысты көбейді, бірақ оның ықпалы басқа жолдармен де тарады. Оның компаниясының қаруларының сапасы әйгілі болды, ал Америка мен Англиядағы қару-жарақ қоймалары бірнеше буын құрама жасаушыларды және басқа да машина жасаушыларды оқытты, олар келесі жарты ғасырдағы басқа өндіріс жұмыстарына үлкен әсер етті. Ертедегі револьверлер капкакпен зарядталатын: пайдаланушы әр камераға қара ұнтақ құйып, оның үстіне оқ салып, содан кейін әр камераның артқы жағындағы сосатынға шабу қалпағын орналастыратын, онда балға оған түсіп, ұнтақ зарядын жандарды. Бұл дәстүрлі бір реттік оқталған тапаншаны зарядтауға ұқсас, бірақ оқ пен допты ұңғының бүкіл ұзындығына дейін жүктеудің орнына цилиндрдің алдыңғы жағына тікелей жүктеуге болады. Маңыздысы, бұл ұңғының өзін рифтелген етіп жасауға мүмкіндік берді, өйткені пайдаланушы оқты ұңғыға күшпен тығыздауға міндетті болған жоқ (дәстүрлі ұңғыдан зарядталатын тапаншаның ұңғысы тегіс болды және оқ салыстырмалы түрде бос болды, бұл оңай зарядтауға мүмкіндік берді, бірақ дәлдігі төмен болды). Атып болғаннан кейін, пайдаланушы келесі ату үшін балғаны кері тартып, тапаншасын тік көтеретін, сонда жарылған соққы қалпағының сынықтары қарудан түсіп, механизмді бұғаттамайды. Ең танымал капкак пен допты револьверлерге Colt Model 1851 "Navy" моделі, 1860 "Army" моделі және Colt Pocket Percussion Revolvers жатты, олардың барлығы Америка Азамат соғысында кеңінен қолданылды. Америкалық револьверлер ең көп таралған болса да, Еуропалық қару жасаушылар сол кезде көптеген револьверлерді жасады, олардың көбі Америка әскерлерінің қолына түсті. Бұларға бір рельсті Лефошо және Лемат револьверлері, сондай-ақ Бомонт-Адамс және Трантер револьверлері кірді. 1854 жылы Эжен Лефошо Lefaucheux Model 1854 револьверін ұсынды, ол бос ұнтақ, тапанша добы және соққылық қалпақтардың орнына өздігінен құрастырылған металл патрондарды қолданған алғашқы револьвер болды. Бұл - бір рельсті, алты оқ ұстайтын отты револьвер. 1856 жылдың 17 қарашасында Хорас Смит пен Дэниел Вессон Rollin White патентін пайдалану туралы келісімге қол қойды, ол әр револьвер үшін 25 центтік төлемді көздейді. Smith & Wesson компаниясы өндірісті 1857 жылдың соңында бастады және Rollin White компаниясымен бірлесіп, патентті ұстап, оны басқа өндірушілердің кез келген бұзушылықтарына қарсы қорғады (Колт револьвердегі бастапқы патентімен істегендей). Уайт патентті иеленсе де, басқа өндірушілер авторлық жарна төлеуге дайын болған жағдайда, дизайнды пайдалана отырып, атыс қаруын сата алды. 1869 жылдың сәуір айында Уайттың патенті аяқталғаннан кейін үшінші ұзартудан бас тартты. Кейін басқа қару өндірушілерге артқы жүктеу әдісін қолдана отырып, әр сатылатын қару үшін авторлық сыйақы төлеуге тура келместен, өз қаруларын шығаруға рұқсат етілді. Ертедегі қарулар көбінесе алдыңғы капкак пен допты револьверлердің түрлендірулері болды, олар артқы жағынан зарядталған металл патрондарды қабылдауға арналған, бірақ кейінірек модельдер, мысалы Colt Model 1872 "ашық үлгісі" және Smith & Wesson Model 3, бастапқыда патронмен зарядталатын револьверлер ретінде жобаланған. Бұл танымал дизайн, бұрынғы қаруларда енгізілген көптеген жетістіктердің нәтижесінде, 6 металл патронды атып, 30-дан астам түрлі калибрде және түрлі ұңғы ұзындығында ұсынылды. Ол әлі де өндірісте, сондай-ақ көптеген клондары мен ұқсас үлгілері бар, және оның жалпы сыртқы түрі 1873 жылдан бері өзгерген жоқ. Бастапқыда АҚШ армиясы үшін жасалған Model 1873 кеңінен таратылып, азаматтар, фермерлер, заң сақтаушылар және заңнан тыс адамдардың арасында танымал болды. Оның дизайны көптеген басқа револьверлерге әсер етті. Colt өндірісті екі рет тоқтатты, бірақ халықтың сұранысы бойынша қайта бастады. АҚШ-та бір рельсті револьвер 19 ғасырдың соңына дейін екі рельсті револьверден гөрі танымал болды. Еуропада, алайда, қару жасаушылар екі рельсті триггерді қабылдауға асықты. АҚШ Model 1873 сияқты қарулар шығарып жатқанда, еуропалық өндірушілер француз MAS Modèle 1873 және кейінірек британдық Enfield Mk I және II револьверлері сияқты екі рельсті модельдерді жасады. (Британдықтар бұрынғы Бомонт-Адамс екі рельсті револьверлерін патронға түрлендірді). Colt еуропалық өндірушілермен бәсекелесу үшін жасаған алғашқы екі рельсті револьвер Colt Model 1877 болды, ол күрделі, қымбат және нәзік триггерлік механизмімен әйгілі болды, ол жиі бұзылып, ауыр триггерді қамтамасыз етті. 1889 жылы Colt Model 1889 револьверін ұсынды, ол "үстінен айналушы" цилиндрлы алғашқы екі рельсті револьвер болды, "үстінен бұзушы" немесе "жағынан зарядталатын" цилиндрге қарағанда. Үстінен айналушы цилиндрлер тез танымал болды, өйткені олар бұрынғы дизайнның ең жақсы ерекшеліктерін біріктірді. Үстінен бұзушы механизмдер барлық бос қабықтарды бірден шығаруға және барлық камераларды оңай қайта зарядтауға мүмкіндік берді, бірақ жақтаудың екі бөлікке бөлінуі қаруды әлсіздетті және қатаңдық жоқтығынан дәлдікті нашарлатты. "Жанама зарядталатын" модельдер, мысалы, бұрынғы Colt Model 1871 және 1873, қатаң жақтауға ие болды, бірақ пайдаланушы әр камераны жеке-жеке шығарып, жүктеуге және цилиндрді жақтан орналасқан жүктеу қақпасымен тегістеуге міндетті болды. Smith & Wesson жеті жылдан кейін .32 S&W Long калибрлі Hand Ejector, Model 1896 револьверін ұсынды, содан кейін жақсартылған Model 1899 (кейінірек Model 10 деп аталды), ол жаңа .38 Special патронын ұсынды. Model 10 20 ғасырдың ең сатылатын тапаншасы болды, 6 000 000 дана сатылды, ал .38 Special бүкіл әлемде револьверлер үшін ең танымал калибр болып табылады. Бұл жаңа қарулар Colt 1889 дизайнынан жақсы болды, өйткені олар біріктірілген орталық...
In the development of firearms, an important limiting factor was the time required to reload the weapon after it was fired. While the user was reloading, the weapon was useless, allowing an adversary to attack the user. Several approaches to the problem of increasing the rate of fire were developed, the earliest involving multi barrelled weapons which allowed two or more shots without reloading. Later weapons featured multiple barrels revolving along a single axis. A matchlock revolver with a single barrel and four chambers held at the Tower of London is believed to have been invented some time in the 15th century. A revolving three barrelled matchlock pistol in Venice is dated from at least 1548. During the late 16th century in China, Zhao Shi zhen invented the Xun Lei Chong, a five barreled musket revolver spear. Around the same time, the earliest examples of the modern revolver were made in Germany. These weapons featured a single barrel with a revolving cylinder holding the powder and ball. They would soon be made by many European gun makers, in numerous designs and configurations. However, these weapons were complicated, difficult to use and prohibitively expensive to make, and thus not widely distributed. In the early 19th century, multiple barrel handguns called "pepper boxes" were popular. Originally they were muzzleloaders, but in 1837, the Belgian gunsmith Mariette invented a hammerless pepperbox with a ring trigger and turn off barrels that could be unscrewed. In 1836, American Samuel Colt patented a popular revolver which led to the widespread use of the revolver. According to Colt, he came up with the idea for the revolver while at sea, inspired by the capstan, which had a ratchet and pawl mechanism on it, a version of which was used in his guns to rotate the cylinder by cocking the hammer. This provided a reliable and repeatable way to index each round and did away with the need to manually rotate the cylinder. Revolvers proliferated largely due to Colt's ability as a salesman, but his influence spread in other ways as well. The build quality of his company's guns became famous, and its armories in America and England trained several seminal generations of toolmakers and other machinists, who had great influence in other manufacturing efforts of the next half century. Early revolvers were caplock muzzleloaders: the user had to pour black powder into each chamber, ram down a bullet on top of it, then place a percussion cap on the nipple at the rear of each chamber, where the hammer would fall on it and ignite the powder charge. This was similar to loading a traditional single shot muzzle loading pistol, except that the powder and shot could be loaded directly into the front of the cylinder rather than having to be loaded down the whole length of the barrel. Importantly, this allowed the barrel itself to be rifled, since the user was not required to force the tight fitting bullet down the barrel in order to load it (a traditional muzzle loading pistol had a smoothbore barrel and the shot was relatively loose fitting, which allowed easy loading, but was much less accurate). After firing a shot, the user would raise their pistol vertically while cocking the hammer back for their next shot, so the fragments of the burst percussion cap would fall clear of the weapon and not jam the mechanism. Some of the most popular cap and ball revolvers were the Colt Model 1851 "Navy" model, 1860 "Army" model, and Colt Pocket Percussion Revolvers, all of which saw extensive use in the American Civil War. Although American revolvers were the most common, European arms makers were making numerous revolvers by that time as well, many of which found their way into the hands of the American forces. These included the single action Lefaucheux and LeMat revolvers, as well as the Beaumont–Adams and Tranter revolvers—early double action weapons in spite of being muzzle loaders. In 1854, Eugene Lefaucheux introduced the Lefaucheux Model 1854, the first revolver to use self contained metallic cartridges rather than loose powder, pistol ball, and percussion caps. It is a single action, pinfire revolver holding six rounds. On November 17, 1856, Horace Smith and Daniel B. Wesson signed an agreement for the exclusive use of the Rollin White Patent at a rate of 25 cents for every revolver. Smith & Wesson began production late in 1857, and enjoyed years of exclusive production of rear loading cartridge revolvers in America due to their association with Rollin White, who held the patent and vigorously defended it against any perceived infringement by other manufacturers (much as Colt had done with his original patent on the revolver). Although White held the patent, other manufacturers were able to sell firearms using the design, provided they were willing to pay royalties. After White's patent expired in April 1869, a third extension was refused. Other gun makers were then allowed to produce their own weapons using the rear loading method, without having to pay a royalty on each gun sold. Early guns were often conversions of earlier cap and ball revolvers, modified to accept metallic cartridges loaded from the rear, but later models, such as the Colt Model 1872 "open top" and the Smith & Wesson Model 3, were designed from the start as cartridge revolvers. This popular design, which was a culmination of many of the advances introduced in earlier weapons, fired 6 metallic cartridges and was offered in over 30 different calibers and various barrel lengths. It is still in production, along with numerous clones and lookalikes, and its overall appearance has remained the same since 1873. Although originally made for the United States Army, the Model 1873 was widely distributed and popular with civilians, ranchers, lawmen, and outlaws alike. Its design has influenced countless other revolvers. Colt has discontinued its production twice, but resumed production due to popular demand. In the U. S., the single action revolver remained more popular than the double action revolver until the late 19th century. In Europe, however, arms makers were quick to adopt the double action trigger. While the U. S. was producing weapons like the Model 1873, European manufacturers were building double action models like the French MAS Modèle 1873 and the later British Enfield Mk I and II revolvers. (Britain relied on cartridge conversions of the earlier Beaumont–Adams double action prior to this.) Colt's first attempt at a double action revolver to compete with European manufacturers was the Colt Model 1877, which earned lasting notoriety for its complex, expensive, and fragile trigger mechanism, which in addition to failing frequently, also had a heavy trigger pull. In 1889, Colt introduced the Model 1889, the first double action revolver with a "swing out" cylinder, as opposed to a "top break" or "side loading" cylinder. Swing out cylinders quickly caught on, because they combined the best features of earlier designs. Top break actions had the ability to eject all empty shells simultaneously and exposed all chambers for easy reloading, but having the frame hinged into two halves weakened the gun and negatively affected accuracy due to the lack of rigidity. "Side loaders", like the earlier Colt Model 1871 and 1873, had a rigid frame, but required the user to eject and load one chamber at a time as they rotated the cylinder to line each chamber up with the side mounted loading gate. Smith & Wesson followed seven years later with the Hand Ejector, Model 1896 in .32 S&W Long caliber, followed by the very similar, yet improved, Model 1899 (later known as the Model 10), which introduced the new .38 Special cartridge. The Model 10 went on to become the best selling handgun of the 20th century, at 6,000,000 units, and the .38 Special is still the most popular chambering for revolvers in the world. These new guns were an improvement over the Colt 1889 design since they incorporated a combined center pin and ejector rod to lock the cylinder in position, whereas the Colt 1889 did not use a center pin and the cylinder was prone to move out of alignment.
Патенттер
1815 жылы (кейде 1825 жыл деп қате саналады) француз өнертапқышы Жюльен Лерой жапқышпен және перкуссиямен айналатын мылтықты, механикалық түрде индекстелген цилиндрмен және капсюльдерге арналған бөлімшемен патенттеді. 1818 жылы Бостоннан (Массачусетс штаты) Елиша Кольер Ұлыбританияда жапқышпен жұмыс істейтін револьверді патенттеді, ал 1822 жылға қарай Лондонда оның көптеген даналары өндірілді. Бұл өнертабыстың бастауы күмәнді, себебі сол жылы АҚШ-та Артемус Уилер және Францияда Корнелиус Кулидж да ұқсас конструкцияларды патенттеген. Сэмюэл Колт 1835 жылы револьвері үшін британдық патент алды, ал 1836 жылдың 25 ақпанында АҚШ патентін (№138) «Айналатын мылтық» үшін тапсырды және сол жылдың 5 наурызында алғашқы өндіріс үлгісін жасады. 1839 жылдың 29 тамызында Сэмюэл Колтқа тағы бір револьвер патенті берілді. 1836 жылдың 25 ақпанындағы патент 1848 жылдың 24 қазанында қайта жаңартылды. Одан кейін 1850 жылдың 3 қыркүйегінде «Револьвер» үшін, ал 1850 жылдың 10 қыркүйегінде «Револьвер» үшін патенттер берілді. 1855 жылы Ролин Уайт цилиндрі тесілген айналатын қаруды жетілдіруге арналған патент алды. 1856 жылы Хорас Смит пен Дэниел Вессон серіктестік құрды (S&W), содан кейін өздігінен жанатын металл патрондары бар револьверді жасап, өндірді. 1993 жылы Роджер С. Филдке револьвердің ұңғысы мен цилиндрі арасындағы жарықты азайтуға арналған экономикалық құрылғы үшін патент берілді.
In 1815, (sometimes incorrectly dated as 1825) a French inventor called Julien Leroy patented a flintlock and percussion revolving rifle with a mechanically indexed cylinder and a priming magazine. Elisha Collier of Boston, Massachusetts, patented a flintlock revolver in Britain in 1818, and significant numbers were being produced in London by 1822. The origination of this invention is in doubt, as similar designs were patented in the same year by Artemus Wheeler in the United States, and by Cornelius Coolidge in France. Samuel Colt submitted a British patent for his revolver in 1835 and a U. S. patent (number 138) on February 25, 1836, for a Revolving gun, and made the first production model on March 5 of that year. Another revolver patent was issued to Samuel Colt on August 29, 1839. The February 25, 1836, patent was then reissued as entitled Revolving gun on October 24, 1848. This was followed by on September 3, 1850, for a Revolver, and by on September 10, 1850, for a Revolver. In 1855, Rollin White patented the bored through cylinder entitled Improvement in revolving fire arms In 1856, Horace Smith & Daniel Wesson formed a partnership (S&W), then developed and manufactured a revolver chambered for a self contained metallic cartridge. In 1993, was issued to Roger C. Field for an economical device for minimizing the flash gap of a revolver between the barrel and the cylinder.
Дизайн
Револьверде цилиндрлік блок шеңберінде орналасқан бірнеше оқ атар камералары бар; бір мезгілде бұл камералар оқ атар механизмімен және ұңғымен сәйкестендіріледі. Ал, басқа қайталанатын атыс қарулары, мысалы, инелі, рычагты, поршенді және жартылай автоматты түрдегі қарулар, бір ғана оқ атар камерасы және ондағы оқтарды жүктеу және шығару механизміне ие. Бір рет қолданылатын револьверде әр оқ атар алдында доңғалақты қолмен кері тартып алу қажет, бұл цилиндрді де айналдырады. Бұл доңғалақтың бір ғана "бір әрекет" атқаруына мүмкіндік береді – оқты ату үшін доңғалақты босату. Ал, өзіндік қозғалтатын, немесе қос әрекетті револьверде, бір ұзақ қысыммен доңғалақ кері тартылып, цилиндр айналады, содан кейін оқ атылады, сондықтан бір әрекетті револьверге қарағанда доңғалақты тарту үшін көбірек күш пен қашықтық қажет. Олар, әдетте, бір әрекетті револьверге қарағанда жылдам атылуы мүмкін, бірақ көптеген атушылардың қолындағы дәлдік төмендейді. Smith & Wesson Model 325 Thunder Ranch (.45 ACP) және Chiappa Rhino (.357 Magnum, 9×19mm, .40 S&W немесе 9×21mm) барлық нұсқалары, тиісінше 2" және 3" модельдерінен басқа. Алайда, кейбір револьверлер, мысалы Taurus Judge және Charter Arms револьверлері қосымша рельстермен жабдықталуы мүмкін. Револьверлердің көбінесе 6 камерасы болады, сондықтан "алты оқты" немесе "алты атушы" деген жалпы атаулар қолданылады. Автоматты түрде оқталатын тапаншалармен салыстырғанда, револьверді пайдалану әлдеқайда қарапайым және сенімділігі жоғары болуы мүмкін. Олардың кейбіреулері стандарттау кезеңінде берік екенін көрсетті, ал кейбіреулері жалпы жұртшылықтың назарына түсті. Олардың арасында .22 Long Rifle, нысанаға ату және жаңадан бастаған атушыларды оқыту үшін танымал калибр; .38 Special және .357 Magnum, полиция үшін танымал; .44 Magnum, Клинт Иствудтың "Жыртқыш Гарри" фильмінен танымал; және .45 Colt, Жабайы Батыстағы Colt револьверінде пайдаланылған. 2003 жылы шығарылған Smith & Wesson Model 500 - .500 S&W Magnum оғын пайдаланатын ең қуатты револьверлердің бірі. Револьвердегі оқтардың негізі жиектің үстінде болғандықтан, кейбір револьверлер бірнеше оқ-дәрі түрін қабылдай алады. .44 Magnum калибрлі револьверлер .44 Special және .44 Russian оқтарын, ал .357 Magnum калибрлі револьверлер .38 Special, .38 Long Colt және .38 Short Colt оқтарын қауіпсіз түрде қабылдайды. .22 WMR калибрлі револьверлер .22 Long Rifle, .22 Long және .22 Short оқтарын қабылдай алады, бірақ оқ қысымының айырмашылығы және .22 WMR оқтың "ұнтақталған" түйреуі болмауы, сондай-ақ жиектің диаметрінің айырмашылығы оқтан газдың шығуына және пайдаланушыға ауыр жарақаттарға әкелуі мүмкін болғандықтан, мұны істеу қауіпсіз емес. Алайда, кейбір .22 револьверлері алмастырылатын цилиндрлермен келеді, сондықтан .22 WMR револьверінен .22 Long Rifle оқтарын атуға болады. 1996 жылы Medusa Model 47 жасалды, ол диаметрі .355" және .357" арасындағы 25 түрлі оқ-дәріні қабылдай алатын. Револьвер технологиясы АҚШ әскері қолданатын басқа да қаруларда да қолданылады. Кейбір автокөліктік зеңбіректер мен гранататар револьверге ұқсас механизмдерді пайдаланады, ал кейбір көтерілісшілердің сауыттары 12 оққа дейін сыйымдылықтағы серіпті цилиндрлерді пайдаланады. Револьверлер қосымша қару ретінде қызмет етумен қатар, қалқан қару ретінде де мамандық рөлін атқарады; "оқ өткізбейтін" қару қалқанын қолданатын құқық қорғау органдарының қызметкерлері кейде пистолеттің сырғанауы қалқанның алдыңғы жағына соқтығысуы мүмкін болғандықтан, пистолет орнына револьверді таңдайды. Револьверлерде мұндай кемшілік жоқ. Қалқанның артына екінші револьверді орнатуға болады, бұл оқтың үздіксіз атылуын қамтамасыз етеді. Көптеген полиция қызметкерлері олардың салыстырмалы механикалық қарапайымдығы мен пайдалану оңайлығына байланысты револьверді қызметтік қару ретінде пайдалануды жалғастыруда. 2010 жылы ірі револьвер өндірушілер Ruger LCR, Smith & Wesson Bodyguard 38 және Taurus Protector Polymer сияқты полимерлік рамалы револьверлерді шығара бастады. Жаңа дизайн салмақты едәуір төмендететін, кері соққыны сіңіруге көмектесетін және .38 Special +P және .357 Magnum оқтарын қабылдауға жеткілікті күшті полимер технологиясын қамтиды. Полимер тек төменгі рамада қолданылады және металл қорытпасынан жасалған жоғарғы рама, ұңғы және цилиндрмен біріктіріледі. Полимер технологиясы револьвер тарихындағы маңызды жетістіктердің бірі болып саналады, өйткені рама бұрын әрқашан металл қорытпасынан және көбінесе бір бөліктен жасалған. Револьвер технологиясының тағы бір 21-ғасырлық дамуы - итальяндық өндіруші Чиаппаның 2009 жылы ұсынған және 2010 жылы АҚШ-та сатылымға шығарған Chiappa Rhino. АҚШ-та жасырын тасымалдау нарығын ескере отырып жасалған Rhino револьверінде оқ әдеттегідей цилиндрдің жоғарғы камерасынан емес, төменгі камерасынан атылады. Бұл тұмсықтың бұрылуын азайтуға және жылдам және дәл қайталау атуға мүмкіндік беруге арналған. Сонымен қатар, цилиндрдің қимасы дөңгелек емес, алтыбұрышты, бұл қарудың пішінін одан әрі кішірейтеді. Цилиндрді осылай жүктеу баяу және қиын процесс болатын және әдетте шайқас ортасында жасалмайтын. Кейбір әскерлер осыдан сақтану үшін өрісте бірнеше револьвер тасыды. Басқа шешім - алынып тасталатын цилиндрлі револьверді пайдалану. Бұл револьверлер атушыға цилиндрді жылдам алып тастап, толық цилиндрмен ауыстыруға мүмкіндік берді. Түпнұсқа Colt дизайнындағы (және содан бері жасалған барлық бір әрекетті револьверлерде, мысалы, танымал Colt Single Action Army) жүктеу қақпасы оң жақта орналасқан, бұл жылқыға мініп бара жатып жүктеуді жеңілдету үшін жасалған; револьвер сол қолда бағылған, ал жылқының тоңғыларымен ұсталған, оқтарды оң қолмен шығарып, жүктеуге болады. Осы типтегі револьверлердегі цилиндрлер раманың алдыңғы және артқы жағында берік бекітілгендіктен және рама әдетте айналасымен толық қалыңдықпен жасалғандықтан, бекітілген цилиндрлі револьверлер өте берік конструкция болып табылады. Сәйкесінше, көптеген қазіргі үлкен калибрлі аң аулау револьверлері бекітілген цилиндрлі конструкцияға негізделген. Бекітілген цилиндрлі револьверлер ең күшті және қуатты оқтарды атуға қабілетті, бірақ бір уақытта бір камера ғана жүктеу қақпасына көрінетіндіктен, бірнеше оқты бірден жүктеуге арналған жылдам жүктегіштерді немесе айлық клиптерді пайдалана алмайтындықтан, жүктеу немесе босату үшін ең баяу болып табылады.
A revolver has several firing chambers arranged in a circle in a cylindrical block; one at a time, these chambers are brought into alignment with the firing mechanism and barrel. In contrast, other repeating firearms, such as bolt action, lever action, pump action, and semi automatic, have a single firing chamber and a mechanism to load and extract cartridges into it. A single action revolver requires the hammer to be pulled back by hand before each shot, which also revolves the cylinder. This leaves the trigger with one "single action" to perform—releasing the hammer to fire the shot. In contrast, with a self cocking, or double action, revolver, one long squeeze of the trigger pulls back the hammer and revolves the cylinder, then finally fires the shot, thus requiring more force and distance to pull the trigger than in a single action revolver. They can generally be fired faster than a single action, but with reduced accuracy in the hands of most shooters. Smith & Wesson Model 325 Thunder Ranch (.45 ACP), and all versions of the Chiappa Rhino (.357 Magnum, 9×19mm, .40 S&W, or 9×21mm) except for the 2" and 3" models, respectively. However, certain revolvers, such as the Taurus Judge and Charter Arms revolvers, can be fitted with accessory rails. Revolvers most commonly have 6 chambers, hence the common names of "six gun" or "six shooter". Compared to autoloading handguns, a revolver is often much simpler to operate and may have greater reliability. Some of these have proved more durable during periods of standardization and some have entered general public awareness. Among these are the .22 Long Rifle, a caliber popular for target shooting and teaching novice shooters; .38 Special and .357 Magnum, known for police use; the .44 Magnum, famous from Clint Eastwood's Dirty Harry films; and the .45 Colt, used in the Colt revolver of the Wild West. Introduced in 2003, the Smith & Wesson Model 500 is one of the most powerful revolvers, utilizing the .500 S&W Magnum cartridge. Because the rounds in a revolver are headspaced on the rim, some revolvers are capable of chambering more than one type of ammunition. Revolvers chambered in .44 Magnum will also chamber .44 Special and .44 Russian, likewise revolvers in .357 Magnum will safely chamber .38 Special, .38 Long Colt, and .38 Short Colt; while revolvers in .22 WMR can chamber .22 Long Rifle, .22 Long, and .22 Short, it is not safe to do so, due to differences in cartridge pressures and the fact that .22 WMR does not shoot a "heeled" bullet, along with differences in rim diameter that can allow high pressure gases to escape behind the cartridge and seriously injure the user. However, some .22 revolvers come with interchangeable cylinders so that .22 Long Rifle can be shot from a .22 WMR revolver. In 1996, the Medusa Model 47 was made with the ability to chamber 25 different cartridges with bullet diameters between .355" and .357". Revolver technology is also present in other weapons used by the U. S. military. Some autocannons and grenade launchers use mechanisms similar to revolvers, and some riot shotguns use spring loaded cylinders holding up to 12 rounds. In addition to serving as backup guns, revolvers still fill the specialized role as a shield gun; law enforcement personnel using a "bulletproof" gun shield sometimes opt for a revolver instead of a self loading pistol, because the slide of a pistol may strike the front of the shield when fired. Revolvers do not suffer from this disadvantage. A second revolver may be secured behind the shield to provide a quick means of continuity of fire. Many police also still use revolvers as their duty weapon due to their relative mechanical simplicity and ease of use. In 2010, major revolver manufacturers started producing polymer frame revolvers like the Ruger LCR, Smith & Wesson Bodyguard 38, and Taurus Protector Polymer. The new design incorporates polymer technology that lowers weight significantly, helps absorb recoil, and is strong enough to handle .38 Special +P and .357 Magnum loads. The polymer is only used on the lower frame and is joined to an upper frame, barrel, and cylinder that are made of metal alloy. Polymer technology is considered one of the major advancements in revolver history because the frame was previously always metal alloy and mostly a one piece design. Another 21st century development in revolver technology is the Chiappa Rhino, a revolver introduced by Italian manufacturer Chiappa in 2009, and first sold in the U. S. in 2010. The Rhino, built with the U. S. concealed carry market in mind, is designed so that the bullet fires from the bottom chamber of the cylinder instead of the top chamber, as is typical in revolvers. This is intended to reduce muzzle flip, allowing for faster and more accurate repeat shots. In addition, the cylinder cross section is hexagonal instead of circular, further reducing the weapon's profile. Loading a cylinder in this manner was a slow and awkward process and generally could not be done in the midst of battle. Some soldiers avoided this by carrying multiple revolvers in the field. Another solution was to use a revolver with a detachable cylinder design. These revolvers allowed the shooter to quickly remove a cylinder and replace it with a full one. The loading gate on the original Colt designs (and on nearly all single action revolvers since, such as the famous Colt Single Action Army) is on the right side, which was done to facilitate loading while on horseback; with the revolver held in the left hand with the reins of the horse, the cartridges can be ejected and loaded with the right hand. Because the cylinders in these types of revolvers are firmly attached at the front and rear of the frame, and the frame is typically full thickness all the way around, fixed cylinder revolvers are inherently strong designs. Accordingly, many modern large caliber hunting revolvers tend to be based on the fixed cylinder design. Fixed cylinder revolvers can fire the strongest and most powerful cartridges, but at the price of being the slowest to load or unload since they cannot use speedloaders or moon clips to load multiple cartridges at once, as only one chamber is exposed at a time to the loading gate.
Жоғарғы үзіліс цилиндрі
Жоғарғы бөлігі ашылатын револьверде, рама цилиндрдің төменгі алдыңғы жағынан шарнирленген. Құлыпты босату және оқпанды төмен итеру цилиндрдің артқы жағын ашады. Көптеген жоғарғы бөлігі ашылатын револьверлерде, бұл әрекет сонымен қатар патрондарды камерадан кері итеріп, оларды түсіріп алуға немесе оңай шығаруға мүмкіндік беретін экстракторды іске қосады. Содан кейін цилиндрге жаңа патрондар салынады. Оқпан мен цилиндр кері бұрылып, орнына бекітіледі, сосын револьвер оқ атуға дайын болады. Ең көп таралған жоғарғы бөлігі ашылатын револьверлерді Smith & Wesson, Webley & Scott, Iver Johnson, Harrington & Richardson, Manhattan Fire Arms, Meriden Arms және Forehand & Wadsworth компаниялары шығарған.
In a top break revolver, the frame is hinged at the bottom front of the cylinder. Releasing the lock and pushing the barrel down exposes the rear face of the cylinder. In most top break revolvers, this act also operates an extractor that pushes the cartridges in the chambers back far enough that they will fall free, or can be removed easily. Fresh rounds are then inserted into the cylinder. The barrel and cylinder are then rotated back and locked in place, and the revolver is ready to fire. The most commonly found top break revolvers were manufactured by Smith & Wesson, Webley & Scott, Iver Johnson, Harrington & Richardson, Manhattan Fire Arms, Meriden Arms, and Forehand & Wadsworth.
Үстелге тұйықталатын цилиндр
Астына қарай бұрылатын револьвер – металл оқ-дәрілермен қолданылған алғашқы конструкция, Smith & Wesson Model 1 револьверінде оқпан жоғары қарай айналады және жоғарғы тіреуіштің алдыңғы жағында бекітілген. S&W астына қарай бұрылатын револьверлерде оқпанды босату тетігі, қақпақтың алдында, қаңқаның екі жағында орналасқан. Smith & Wesson компаниясы оны Smith & Wesson Model 1 1/2 үшінші сериясында шығаруды тоқтатты, бірақ 1870 жылы Spirlet алған патент негізінде ол 19 ғасырда Еуропада кеңінен қолданылды, бұл патентке оқ шығару жұлдызы да кірген.
The tip up revolver was the first design to be used with metallic cartridges in the Smith & Wesson Model 1, on which the barrel pivoted upwards, hinged on the forward end of the topstrap. On the S&W tip up revolvers, the barrel release catch is located on both sides of the frame in front of the trigger. Smith & Wesson discontinued it in the third series of the Smith & Wesson Model 1 1/2 but it was fairly widely used in Europe in the 19th century after a patent by Spirlet in 1870, which also included an ejector star.
3D-баспалы револьвер
Зигзаг револьвері – 2014 жылдың мамыр айында көпшілікке ұсынылған 3D-басылған .38 револьвері. Оны 3D принтер мен пластик филаментін пайдаланып, Жапонияның Кавасаки қаласының азаматы Йошитомо Имура жасаған. Үндірілетін дизайнға ие револьвер – Нагант М1895, Бельгияда жасалған, Ресей империясы және кейіннен КСРО 1895 жылдан Екінші дүниежүзілік соғысқа дейін қолданған. Бұл револьвердегі патронның қаптамасы оқтың ұшынан ұзаққа созылады, ал цилиндр оқ атуға дайын болғанда патронның ұшын стволге (оқ түйреуіш) орналастырады. Бұл цилиндр мен ствол арасындағы кеңістікті жабады, ал оқ атылғанда қаптама кеңейіп, кеңістікті тығыздайды. Көптеген револьверлердегі цилиндр мен ствол арасындағы шағын кеңістік ішкі баллистика үшін маңызды емес, бірақ Наганттың тығыздағышы, әсіресе үндірілгішпен қолданғанда өте тиімді. Ресейде жасалған ОTs 38 заманауи револьвері патрон корпусына үндірілетін механизмді енгізген оқ-дәрілерді қолданады, бұл үндіру мәселесінде цилиндр мен ствол арасындағы кеңістікті ескермейді. ОTs 38-ге цилиндр мен ствол арасындағы тығыз және дәл орналасу қажет, себебі арнайы оқ-дәрінің (советтік SP 4) пішіні бастапқыда жартылай автоматты қару үшін жасалған. Сонымен қатар, АҚШ әскері Smith & Wesson Model 29 револьверінің туннельдегі жәндіктерге арналған арнайы нұсқасын жасауға тырысты, ол Quiet Special Purpose Revolver (QSPR) деп аталды және арнайы .40 калибрлі оқ-дәрілерді қолданды. Бірақ ол ресми қызметке енбеді.
The Zig zag revolver is a 3D printed .38 Revolver released to the public in May 2014. It was created by a Japanese citizen from Kawasaki named Yoshitomo Imura, using a 3D printer and plastic filament. A suppressible revolver design does exist in the Nagant M1895, a Belgian designed revolver used by Imperial Russia and later the Soviet Union from 1895 through World War II. This revolver uses a unique cartridge whose case extends beyond the tip of the bullet, and a cylinder that moves forward to place the end of the cartridge inside the barrel when ready to fire. This bridges the gap between the cylinder and the barrel, and the case expands to seal the gap when fired. While the tiny gap between cylinder and barrel on most revolvers is insignificant to the internal ballistics, the seal of the Nagant is especially effective when used with a suppressor, and a number of suppressed Nagant revolvers have been used since its invention. There is a modern revolver of Russian design, the OTs 38, which uses ammunition that incorporates the silencing mechanism into the cartridge case, making the gap between cylinder and barrel irrelevant as far as the suppression issue is concerned. The OTs 38 does need an unusually close and precise fit between the cylinder and barrel due to the shape of bullet in the special ammunition (Soviet SP 4), which was originally designed for use in a semi automatic. Additionally, the U. S. military experimented with designing a special version of the Smith & Wesson Model 29 for tunnel rats, called the Quiet Special Purpose Revolver, or QSPR, that uses special .40 caliber ammunition. It never entered official service.
Автоматты револьверлер
"Автоматты револьвер" термині екі түрлі мағынада қолданылады. Біріншісі – он тоғызыншы ғасырдың соңы мен жиырмасыншы ғасырдың басында қолданылған, онда "автоматты" сөзі ату механизміне емес, пайдаланылған оқтандырғыштарды (каптарды) шығаруға қатысты. Осы контексте "автоматты револьвер" дегеніміз – Colt Single Action Army сияқты, әрбір оқтандырғышты жеке-жеке, жылжымалы таяқша немесе штырьмен қолмен шығарудың орнына, бос оқтандырғыштарды "автоматты түрде" шығаратын револьвер, мысалы, механизмді ашқанда. Бұл термин сол кездегі жарнамаларда осындай револьверлерді, оқтандырғыштарды таяқшамен шығаратын, көптеген револьверлерден ажырату үшін кеңінен қолданылды. Екінші мағынасында "автоматты револьвер" ату механизміне сілтеме жасайды, емес, оқтандырғыштарды шығаруға. Двойной әрекетті (double action) револьверлерде ұзын иінтіктің көмегімен молоток керіліп, әрбір оқтан кейін оны қолмен керіту қажеттігі жойылады. Бірақ, мұның кемшілігі – молотокты керітетін ұзын және ауыр иінтік, двойной әрекетті револьверді, сингл әрекеттіге қарағанда дәл атуды қиындатады (дегенмен, двойной әрекеттің молотоғын керіту иінтіктің ұзындығы мен салмағын азайтады). Ату дизайны үшін "автоматты" деп аталатын сирек кездесетін револьвер класы, осы шектеуді жеңуге тырысады, беріп, двойной әрекеттің жылдамдығын, бірақ сингл әрекеттің иінтік күшін қамтамасыз етеді. Webley Fosbery Automatic Revolver осыған ең танымал коммерциялық мысал. Ол кері импульстік механизммен жұмыс істейді, цилиндр мен ұңғы (баррель) кері қарай жылжып, молотокты керітеді және цилиндрді айналдырады. Цилиндрдің сыртындағы ойықтар цилиндрдің келесі патрондық ұяға жақындауына мүмкіндік береді – цилиндр артқа жылғанда жарты айналым, ал алға жылғанда тағы жарты айналым. .38 калибрлі үлгілері сегіз оққа, ал .455 калибрлі үлгілері алты оққа арналған. Сол кезде қолжетімді автоматты тапаншалар үлкен, сенімсіз және қымбат болатын. Автоматты револьвер алғашқыда танымал болды, бірақ сенімді және арзан жартылай автоматты тапаншалардың пайда болуымен тез арада қолданыстан шықты. 1997 жылы Mateba компаниясы кері импульстік механизмді қолданатын автоматты револьверді, Mateba Autorevolver деп аталатын, коммерциялық үлгіні жасады, ол модельге байланысты алты немесе жеті патронды ұстайтын цилиндрді автоматты түрде айналдырады. Компания Autorevolver-дің бірнеше нұсқасын жасады, соның ішінде ұзын ұңғылы және карабинге ұқсас нұсқаларын, .357 Magnum, .44 Magnum және .454 Casull патрондарына арналған. Pancor Jackhammer – автоматты револьверге ұқсас механизмге негізделген ұрыс мылтығы. Ол соққыны алға жылжыту арқылы (цилиндрден босатады), цилиндрді айналдырады және молотокты керітеді.
The term "automatic revolver" has two different meanings, the first being used in the late nineteenth and early twentieth centuries when "automatic" referred not to the operational mechanism of firing, but to extraction and ejection of spent casings. An "automatic revolver" in this context is one which extracts empty fired cases "automatically", such as upon breaking open the action, rather than requiring manual extraction of each case individually with a sliding rod or pin (as in the Colt Single Action Army design). This term was widely used in the advertising of the period as a way to distinguish such revolvers from the far more common rod extraction types. In the second sense, "automatic revolver" refers to the mechanism of firing rather than extraction. Double action revolvers use a long trigger pull to cock the hammer, thus negating the need to manually cock the hammer between shots. The disadvantage of this is that the long, heavy pull cocking the hammer makes the double action revolver much harder to shoot accurately than a single action revolver (although cocking the hammer of a double action reduces the length and weight of the trigger pull). A rare class of revolvers, called automatic for its firing design, attempts to overcome this restriction, giving the high speed of a double action with the trigger effort of a single action. The Webley Fosbery Automatic Revolver is the most famous commercial example of this. It was recoil operated, and the cylinder and barrel recoiled backwards to cock the hammer and revolve the cylinder. Cam grooves were milled on the outside of the cylinder to provide a means of advancing to the next chamber—half a turn as the cylinder moved back, and half a turn as it moved forward. .38 caliber versions held eight shots; .455 caliber versions held six. At the time, the few available automatic pistols were larger, less reliable, and more expensive. The automatic revolver was popular when it first came out, but was quickly superseded by the creation of reliable, inexpensive semi automatic pistols. In 1997, the Mateba company developed a type of recoil operated automatic revolver, commercially named the Mateba Autorevolver, which uses the recoil energy to auto rotate a normal revolver cylinder holding six or seven cartridges, depending on the model. The company has made several versions of its Autorevolver, including longer barrelled and carbine variations, chambered in .357 Magnum, .44 Magnum and .454 Casull. The Pancor Jackhammer is a combat shotgun based on a similar mechanism to an automatic revolver. It uses a blow forward action to move the barrel forward (which unlocks it from the cylinder), rotate the cylinder, and cock the hammer.
Айналатын ұзын қарулар
Револьверлер тек қол мылтықтарымен ғана шектелмеді; ұзын ұңғылы қару әскери қолданыста қосалқы қарудан тиімді болғандықтан, бұл идея револьвер механизмінің тарихында мылтықтар мен оқпандарға да қолданылды, бірақ нәтижелері әртүрлі болды.
Revolvers were not limited to handguns; as a longer barrelled arm is more useful in military applications than a sidearm, the idea was applied to both rifles and shotguns throughout the history of the revolver mechanism with mixed degrees of success.
Қарулар
Айналмалы мылтықтар, бұрылмалы пистолеттер үшін бұрын жасалған айналмалы механизмді мылтықтармен біріктіру арқылы олардың ату жылдамдығын арттыру мақсатында жасалды. Кольт 19 ғасырдың басында айналмалы мылтықтармен тәжірибе жүргізе бастады, оларды әртүрлі калибрлерде және оқпан ұзындығында шығарды. Colt айналмалы мылтықтары – АҚШ әскері қабылдаған алғашқы қайталайтын мылтықтар, олар сарбаздардың ату жылдамдығын арттыру үшін берілді. Бірақ алты оқ атқаннан кейін, оқтандыруға тым көп уақыт кетті. Сонымен қатар, кейде Colt мылтықтары барлық оқтарын бірден атып, атушыны қауіпке тікелей ұшыратып жіберді. Дегенмен, 1838 жылғы Семинол соғыстарында оның алғашқы үлгісі қолданылды. Азамат соғысы кезінде Лемат револьверінің негізінде Лемат карабині жасалды. Taurus және оның австралиялық серіктесі Rossi компаниясы Taurus Judge револьверінің карабин нұсқасын Taurus/Rossi Circuit Judge деп атайды. Ол .45 Long Colt және .410 bore, сондай-ақ .44 Magnum патронымен және .22LR/.22WMR екі цилиндрлі модельдерінің бастапқы комбинациясында шығады. Мылтықта цилиндр мен ұңғыдан ыстық газдардың шығуынан қорғау үшін цилиндрге шағын қорғаныш экрандары бекітілген.
Revolving rifles were developed in an attempt to increase the rate of fire of rifles by combining them with the revolving firing mechanism that had been developed earlier for revolving pistols. Colt began experimenting with revolving rifles in the early 19th century, making them in a variety of calibers and barrel lengths. Colt revolving rifles were the first repeating rifles adopted by the U. S. military, issued to soldiers to improve their rate of fire. However, after firing six shots, the shooter had to take an excessive amount of time to reload. Also, on occasion, these Colt rifles discharged all their rounds at once, endangering the shooter. Even so, an early model was used in the Seminole Wars in 1838. During the Civil War, a LeMat Carbine was made based on the LeMat revolver. Taurus and its Australian partner company, Rossi, manufactures a carbine variant of the Taurus Judge revolver known as the Taurus/Rossi Circuit Judge. It comes in the original combination chambering of .45 Long Colt and .410 bore, as well as the .44 Magnum chambering and dual cylinder .22LR/.22WMR model. The rifle has small blast shields attached to the cylinder to protect the shooter from hot gases escaping between the cylinder and barrel.
Қарулар
Colt қысқа мерзімде бірнеше айналмалы саптық мылтықтарды жасады, олардың сәттілігі әртүрлі болды. Colt Model 1839 Shotgun 1839 және 1841 жылдар аралығында өндірілді. Кейін, 1855 модельді айналмалы мылтыққа негізделген Colt Model 1855 Shotgun 1860 және 1863 жылдар аралығында өндірілді. Төмен өндіріс саны мен ескілігіне байланысты, олар Colt өру қаруларының ең сирек кездесетін түрлерінің қатарына жатады. Armsel Striker – цилиндрінде 12 калибрлі 10 оққа дейін сыйымды айналмалы саптық мылтық. Cobray оны Streetsweeper деп көшірді. Белгіленгендей, түпнұсқа Taurus/Rossi Circuit Judge .45LC патрондары мен .410 калибрлі оқтарды қолдануға арналған. Дегенмен, оның стволы тегіс емес, иінді. MTs255 (МЦ255) – 5 оқтық ішкі айналмалы цилиндрмен зарядталатын саптық мылтық. Оны ЦКИБ СОО, Спорттық және аңшылық қару-жарақтарды жобалау және зерттеу орталық бюросы шығарады. Олар 12, 20, 28 және 32 калибрлі, сондай-ақ .410 калибрлі болып келеді.
Colt briefly manufactured several revolving shotguns that were met with mixed success. The Colt Model 1839 Shotgun was manufactured between 1839 and 1841. Later, the Colt Model 1855 Shotgun, based on the Model 1855 revolving rifle, was manufactured between 1860 and 1863. Because of their low production numbers and age, they are among the rarest of all Colt firearms. The Armsel Striker was a modern take on the revolving shotgun that held 10 rounds of 12 Gauge ammunition in its cylinder. It was copied by Cobray as the Streetsweeper. As noted, the original Taurus/Rossi Circuit Judge is chambered to use both .45LC cartridges and .410 bore shells. However, it utilizes a rifled, rather than smooth bore barrel. The MTs255 (МЦ255) is a shotgun fed by a 5 round internal revolving cylinder. It is produced by the TsKIB SOO, Central Design, and Research Bureau of Sporting and Hunting Arms. They are available in 12, 20, 28, and 32 gauges, and .410 bore.
Басқа қарулар
Hawk MM 1, Milkor MGL, RG 6 және RGP 40 – револьверлік принциппен жұмыс істейтін гранатометтер. Олардың цилиндрлері ауыр болғандықтан, цилиндрді айналдыру үшін серіппелі механизм қолданылады. Револьверлік зеңбіректер орта калибрлі оқ-дәрілерді атқылау үшін электрмотормен басқарылатын, револьверге ұқсас механизмді пайдаланады.
The Hawk MM 1, Milkor MGL, RG 6, and RGP 40 are grenade launchers that use a revolver action. Because the cylinders are much more massive, they use a spring wound mechanism to index the cylinder. Revolver cannons use a motor driven, revolver like mechanism to fire medium caliber ammunition.
Алты пуля
Алты патрон немесе алты ату – алты патронды ұстайтын револьвер. Алты патронның цилиндрі жиі "дөңгелек" деп аталады, ал алты патронның өзі көбінесе "дөңгелек мылтық" деп аталады. "Алты пуля" кез келген алты камералы револьверді білдірсе де, әдетте Colt Single Action Army немесе оның Ruger Vaquero және Beretta Stampede сияқты заманауи көрінісін білдіреді. 1970 жылдарға дейін, Colt Single Action Army және Ruger Blackhawk сияқты ескі үлгідегі револьверлер, оқ ату тетігіне тимейтін (мысалы, оқ ату тетігін тоқтатушы, балғаны тоқтатушы немесе ауыстыру таяқшасы) қауіпсіздік құрылғыларымен қайта жабдықталғанша, қауіпсіз тасымалдау үшін балғаны бос патронға орналастыру қажет болды, осылайша қолданылатын патрондардың санын алтыдан бесеуге дейін азайтуға немесе кейбір үлгілерде, арнайы жасалған штырьға немесе ойыққа балғаны патрон арасында орналастыруға болады, осылайша толық алты патронды қолдануға мүмкіндік берді. Бұл, балғаның бос патронның оқын тікелей басуына жол бермеді. Егер осылай қолданбаса, балға тікелей оққа тиіп, қару түсіп кетсе немесе балғаға соққы берілсе, кездейсоқ оқ атылуы мүмкін. Кейбір қаптама жасаушылар балғаның астына қою үшін қалың былғары шнурды дайындады, бұл алты патронмен толық зарядталған қаруды алып жүруге және қарудың қаптамадан кездейсоқ түсіп кетпеуіне мүмкіндік берді. Алты патрон көбінесе каубойлық атқышумен айналысатын адамдар бәсекелестік атқышуда қолданады және Ескі Батыстың атыстарын еліктеуге, сондай-ақ жалпы нысанаға атқылау, аң аулау және жеке қорғаныс сияқты басқа мақсаттарға арналған.
A six gun or six shooter is a revolver that holds six cartridges. The cylinder in a six gun is often called a "wheel", and the six gun is itself often called a "wheel gun". Although a "six gun" can refer to any six chambered revolver, it is typically a reference to the Colt Single Action Army, or its modern look alikes such as the Ruger Vaquero and Beretta Stampede. Until the 1970s, when older design revolvers such as the Colt Single Action Army and Ruger Blackhawk were re engineered with drop safeties (such as firing pin blocks, hammer blocks, or transfer bars) that prevent the firing pin from contacting the cartridge's primer unless the trigger is pulled, safe carry required the hammer being positioned over an empty chamber, thus reducing the available cartridges from six to five, or, on some models, positioned in between chambers on either a pin or in a groove made for that purpose, thus keeping the full six rounds available. This kept the uncocked hammer from resting directly on the primer of a cartridge. If not used in this manner, the hammer rests directly on a primer and unintentional firing may occur if the gun is dropped or the hammer is struck. Some holster makers provided a thick leather thong to place underneath the hammer that both allowed the carry of a gun fully loaded with all six rounds and secured the gun in the holster to help prevent its accidental loss. Six guns are commonly used by cowboy action shooting enthusiasts in competition shooting and are designed to mimic the gunfights of the Old West, as well as for other applications such as general target shooting, hunting, and personal defense.