Сравнивайте с английским: нажмите на абзац — оригинал откроется в окне. Кнопка EN под абзацем показывает его прямо в тексте.
Содержание
Введение
Самозарядный патрон, заряженный дробью или цельной пулей.
Self contained cartridge loaded with either shot or a solid slug
Дробовой патрон (гильза, снаряд) – это тип патрона с бортовым (с ободком) доном и цилиндрической (прямостенной) формой, предназначенный исключительно для дробовиков. Обычно он заряжен множеством мелких сферических подснарядов, называемых дробью, которые выстреливаются из гладкого ствола с коническим сужением на дульном срезе для регулирования степени рассеивания. Иногда патрон может содержать только один крупный цельный снаряд, известный как пуля (иногда используемый в стволе с нарезами для пуль). Гильза обычно состоит из бумажной или пластиковой трубки, часто закрытой в основании металлическим капсюльным гнездом, в котором удерживается капсюль, а дробь обычно удерживается внутри гильзы ватой/саботом. Калибр дробового патрона называется его номером. Снаряды традиционно изготавливаются из свинца, но другие металлы, такие как сталь, вольфрам и висмут, также используются из-за ограничений на использование свинца или для повышения эффективности, например, для достижения более высокой скорости дроби за счет уменьшения ее массы. Существуют и другие необычные снаряды, такие как оперенные стрелы, резиновые шары, каменная соль и осколки магния. Патроны также могут быть изготовлены со специальными нелетальными снарядами, такими как резиновые пули и мешки с фасолью. Дробовики имеют эффективную дальность стрельбы около с картечью, с мелкозернистой дробью, с пулями и более с оперенными пулями в стволах с нарезами. Другие типы патронов включают:
"Ферреты": патроны, предназначенные для проникновения через тонкое препятствие (например, дверцу автомобиля) и высвобождения газового заряда. "Боло": два больших свинцовых шара, соединенных проволокой. "Пираньи": патроны, полные острых гвоздей. "Дыхание дракона": патроны, наполненные зажигательными химическими веществами, которые при выстреле создают огненный шар/пламя и могут воспламенить легковоспламеняющуюся цель на близком расстоянии. Большинство дробовых патронов предназначены для стрельбы из гладкого ствола, поскольку дробь будет слишком сильно рассеиваться при стрельбе из ствола с нарезами. Ствол с нарезами повышает точность оперенных пуль, но делает его непригодным для стрельбы дробью, так как придает вращение дробовому стакану, вызывая рассеивание дроби. Оперенная пуля имеет нарезку на самой пуле, что позволяет использовать ее в гладкоствольном дробовике.
A shotgun shell, shotshell, or shell is a type of rimmed, cylindrical (straight walled) cartridges used specifically in shotguns, and is typically loaded with numerous small, pellet like spherical sub projectiles called shot, fired through a smoothbore barrel with a tapered constriction at the muzzle to regulate the extent of scattering. A shell can sometimes also contain only a single large solid projectile known as a slug (sometimes fired through a rifled slug barrel). The hull usually consists of a paper or plastic tube often covered at the base by a metallic head cover which retains a primer, and the shot charge is typically contained by a wadding/sabot inside the case. The caliber of the shotshell is known as its gauge. The projectiles are traditionally made of lead, but other metals such as steel, tungsten and bismuth are also used due to restrictions on lead, or for performance reasons such as achieving higher shot velocities by reducing the mass of the shot charge. Other unusual projectiles such as saboted flechettes, rubber balls, rock salt and magnesium shards also exist. Shells can also be made with specialty non lethal projectiles such as rubber and bean bag rounds. Shotguns have an effective range of about with buckshot, with birdshot, with slugs, and well over with saboted slugs in rifled barrels. Other rounds include:
Ferret rounds: rounds designed to penetrate a thin barrier (e. g. a car door) and release a gas payload. Bolo rounds: two large lead balls attached by a wire. Piranha rounds: shells full of sharp tacks. Dragon's breath rounds: shells full of incendiary chemicals that create a fireball/flame when discharged, and can ignite a flammable target at close range. Most shotgun shells are designed to be fired from a smoothbore barrel, as "shot" would be spread too wide by rifling. A rifled barrel will increase the accuracy of sabot slugs, but makes it unsuitable for firing shot, as it imparts a spin to the shot cup, causing the shot cluster to disperse. A rifled slug uses rifling on the slug itself so it can be used in a smoothbore shotgun.
История
В первых патронах для дробовиков использовались латунные гильзы, не сильно отличавшиеся от гильз пистолетных и винтовочных патронов той же эпохи. Эти латунные гильзы дробовых патронов очень напоминали увеличенные винтовочные патроны, как по конструкции донца и капсюльного гнезда, так и по своим размерам. В качестве пыжей в разное время использовались картонные пыжи из войлока, кожи, пробки и картона. Водяное стекло (силикат натрия) обычно применялось для фиксации верхнего пыжа в этих латунных гильзах. На этих ранних латунных гильзах не применялись рулонные или складчатые обжимки, хотя некоторые производители впоследствии стали использовать рулонные обжимки для надежной фиксации пыжа. Капсюли в этих ранних дробовых патронах были идентичны пистолетным капсюлям того же диаметра. Начиная с конца 1870-х годов, бумажные гильзы стали заменять латунные. Бумажные гильзы оставались популярными почти столетие, до начала 1960-х годов. Эти дробовые патроны с бумажными гильзами почти всегда имели рулонную обжимку, хотя складчатая обжимка также со временем стала популярной. Капсюли в этих бумажных гильзах также изменились: от пистолетных капсюлей, использовавшихся в ранних латунных патронах, к капсюлю, содержащему как взрывчатое вещество, так и ударник, в отличие от винтовочных и пистолетных патронов, что делало капсюль дробового патрона выше. Картонные пыжи из войлока и пробки, а также картона, использовались в разное время, постепенно уступая место пластиковым пыжам с пороховым зарядом, с картонными пыжами, и, в конечном итоге, полностью пластиковым пыжам. Начиная с начала 1960-х и до конца 1970-х годов, пластиковые гильзы стали заменять бумажные гильзы для большинства дробовых патронов, а к началу 1980-х годов пластиковые гильзы стали универсальным стандартом.
Early shotgun shells used brass cases, not unlike pistol and rifle cartridge cases of the same era. These brass shotgun hulls or cases closely resembled large rifle cartridges, in terms of both the head and primer portions of the shotgun shell, as well as in their dimensions. Card wads, made of felt, leather, and cork, as well as paperboard, were all used at various times. Waterglass (Sodium silicate) was commonly used to cement the top overshot wad into these brass shell casings. No roll crimp or fold crimp was used on these early brass cases, although roll crimps were eventually used by some manufacturers to hold the overshot wad in place securely. The primers on these early shotgun shells were identical to pistol primers of the same diameter. Starting in the late 1870s, paper hulls began replacing brass hulls. Paper hulls remained popular for nearly a century, until the early 1960s. These shotgun shells using paper hulls were nearly always roll crimped, although fold crimping also eventually became popular. The primers on these paper hull shotgun shells also changed from the pistol primers used on the early brass shotgun shells to a primer containing both the priming charge and an anvil, unlike rifle and pistol ammunition, making the shotgun shell primer taller. Card wads, made of felt and cork, as well as paperboard, were all used at various times, gradually giving way to plastic over powder wads, with card wads, and, eventually, to all plastic wads. Starting from the early 1960s to the late 1970s, plastic hulls started replacing paper hulls for the majority of shotgun shells and by the early 1980s, plastic hulls had become universally adopted.
Типичная конструкция
Современные патроны для дробовика обычно состоят из пластикового гильза, основание которого покрыто тонким слоем латуни или сталью с гальваническим покрытием. Как отмечалось ранее, бумажные гильзы были распространены и до сих пор производятся, наряду с цельнолатунными гильзами. Некоторые компании выпускают гильзы, кажущиеся полностью пластиковыми, хотя в них имеется небольшое металлическое кольцо, отлитое в донце гильзы для придания прочности. Часто для более мощных зарядов используются гильзы с "высокой латунью", где латунь поднимается выше по стенкам гильзы, а для слабых зарядов – гильзы с "низкой латунью". Латунь сама по себе не обеспечивает значительной прочности, но разница во внешнем виде позволяет стрелкам быстро различать патроны с высоким и низким зарядом. Донце гильзы достаточно толстое, чтобы удерживать большой капсюль для дробовика, который длиннее, чем капсюли для винтовочных и пистолетных патронов. Современные бездымные пороха значительно эффективнее оригинального черного пороха, использовавшегося в патронах для дробовиков, поэтому порох занимает относительно небольшой объем; дробовики используют небольшие количества порохов двойной основы, эквивалентных быстрогорящим порохам для пистолетов, содержащим до 50% нитроглицерина. За порохом следует войлок или ватин. Основная задача войлока – предотвратить смешивание дроби и пороха, а также обеспечить уплотнение, которое не позволяет газам прорываться сквозь дробь, а направляет ее для разгона. Конструкция войлока может также включать в себя амортизатор и стаканчик, удерживающий дробь вместе до выхода из ствола. Современный войлок состоит из трех частей: пороховой войлок, демпфер и стаканчик для дроби, которые могут быть выполнены как отдельными элементами, так и единой деталью. Пороховой войлок служит газовым уплотнением (известным как обтюрация) и плотно укладывается поверх пороха; он может быть изготовлен из бумаги или пластика. Далее следует демпфер, который предназначен для сжатия под давлением, чтобы служить амортизатором и минимизировать деформацию дроби; он также заполняет пространство между пороховым войлоком и дробью. Демпферы почти всегда изготавливаются из пластика с зонами смятия, хотя для охоты на дичь в районах, где пасутся сельскохозяйственные животные или дикие животные, часто предпочтительнее биоразлагаемый волокнистый войлок. Стаканчик для дроби – последняя часть патрона, он удерживает дробь вместе при движении по стволу. Стаканчики для дроби имеют прорези по бокам, которые раскрываются после выхода из ствола, позволяя дроби продолжить полет без помех. Стаканчики для дроби, где они используются, также почти повсеместно изготавливаются из пластика. Дробь заполняет стаканчик (который должен быть соответствующей длины для удержания необходимого количества дроби), после чего патрон дробовика обжимается или закрывается. Единственный известный патрон с использованием фланцевого бортика – 12 калибра RAS12, специально разработанный для полуавтоматического дробовика RAS 12.
Modern shotgun shells typically consist of a plastic hull, with the base covered in a thin brass or plated steel covering. As noted previously, paper shells used to be common, and are still made, as are solid brass shells. Some companies have produced what appear to be all plastic shells, although in these there is a small metal ring cast into the rim of the shell to provide strength. Often the more powerful loads will use "high brass" shells, with the brass extended up further along the sides of the shell, while light loads will use "low brass" shells. The brass does not actually provide a significant amount of strength, but the difference in appearance provides shooters with a way to quickly differentiate between high and low powered ammunition. The base of the shell is fairly thick to hold the large shotgun primer, which is longer than primers used for rifle and pistol ammunition. Modern smokeless powders are far more efficient than the original black powder used in shotgun shells, so very little space is actually taken by powder; shotguns use small quantities of double base powders, equivalent to quick burning pistol powders, with up to 50% nitroglycerin. After the powder comes the wadding or wad. The primary purpose of a wad is to prevent the shot and powder from mixing, and to provide a seal that prevents gas from blowing through the shot rather than propelling it. The wad design may also encompass a shock absorber and a cup that holds the shot together until it is out of the barrel. A modern wad consists of three parts, the powder wad, the cushion, and the shot cup, which may be separate pieces or be one part. The powder wad acts as the gas seal (known as obturation), and is placed firmly over the powder; it may be a paper or plastic part. The cushion comes next, and it is designed to compress under pressure, to act as a shock absorber and minimize the deformation of the shot; it also serves to take up as much space as is needed between the powder wad and the shot. Cushions are almost universally made of plastic with crumple zones, although for game shooting in areas grazed by farm stock or wildlife biodegradable fiber wads are often preferred. The shot cup is the last part of the shell, and it serves to hold the shot together as it moves down the barrel. Shot cups have slits on the sides so that they peel open after leaving the barrel, allowing the shot to continue on in flight undisturbed. Shot cups, where used, are also almost universally plastic. The shot fills the shot cup (which must be of the correct length to hold the desired quantity of shot), and the shotgun shell is then crimped, or rolled closed. The only known Shotgun shell using rebated rims is the 12 Gauge RAS12, specially made for the RAS 12 semi automatic shotgun.
Садовые пистолеты
Садовые пистолеты – это гладкоствольное огнестрельное оружие, специально разработанное для стрельбы дробью калибра .22, предназначенной для уничтожения змей, и обычно используется садоводами и фермерами для борьбы с вредителями. Садовые пистолеты – это оружие малой дальности, эффективное на расстоянии до 15-20 ярдов и причиняющее незначительный вред. При стрельбе дробью для змей они значительно тише, чем при использовании стандартных патронов. Эти пистолеты особенно эффективны внутри сараев и хозяйственных построек, поскольку дробь не пробивает крышу или стены и, что более важно, не рикошетит и не ранит скот. Они также применяются для борьбы с вредителями в аэропортах, на складах, скотобойнях и т.п. В 1976 году Служба охраны рыбных и диких ресурсов США предприняла первые шаги по отказу от свинцовой дроби, установив зоны охоты, где разрешено использовать только стальную дробь для водоплавающей дичи. В 1970-х годах были разработаны патроны без содержания свинца, заряженные стальной, висмутовой или вольфрамовой дробью вместо традиционной свинцовой, и их использование стало обязательным при охоте на перелетных птиц (уток и гусей). В 1991 году охота на водоплавающую дичь со свинцовой дробью была запрещена по всей территории Соединенных Штатов. В связи с экологическими нормами, охотники в Европе должны использовать свинцовые боеприпасы с осторожностью. Например, во Франции запрещено стрелять вблизи водоемов. Законы настолько сложны, что некоторые европейские охотники предпочитают не рисковать и использовать композитную дробь в любой ситуации, чтобы избежать проблем. Использование свинцовой дроби запрещено в Канаде и Соединенных Штатах при охоте на перелетных диких птиц, таких как утки и гуси, что требует использования нетоксичной дроби для охоты на водоплавающую дичь (свинцовую дробь все еще можно законно использовать в Соединенных Штатах для охоты на дичь, отличную от водоплавающей). Это означает, что производителям необходимо предлагать новые типы безсвинцовых патронов для дробовиков, заряженных альтернативной дробью, чтобы соответствовать экологическим ограничениям на использование свинца, а также более дешевые свинцовые патроны, чтобы оставаться конкурентоспособными на мировом рынке. C.I.P. осуществляет утверждение всех боеприпасов, которые производитель или импортер планирует продавать в государствах-членах C.I.P. (в основном европейских). Производственные предприятия боеприпасов обязаны тестировать свою продукцию в процессе производства на соответствие требованиям по давлению C.I.P. Для каждой партии продукции должен быть составлен протокол соответствия и сохранен для последующей проверки при необходимости. Помимо испытаний на давление, патроны, содержащие стальную дробь, требуют дополнительного испытания на твердость по Виккерсу. Используемая стальная дробь должна иметь твердость менее 100 HV1, однако известно, что сталь чрезмерно изнашивает ствол с течением времени, если скорость стальной дроби слишком высока, что может привести к опасным ситуациям для пользователя. Следовательно, измерение скорости дроби также является обязательным требованием для патронов калибра 12, 16 и 20 в стандартном и высокопроизводительном исполнении, продаваемых в Европе. Скорость дроби должна быть ниже , и соответственно для стандартных версий. Другим недостатком стальной дроби является ее склонность к непредсказуемому рикошету после столкновения с любой твердой поверхностью. Это создает серьезную опасность на крытых стрельбищах или при использовании металлических мишеней или твердых упоров (например, бетонной стены вместо земляного вала). По этой причине стальная дробь запрещена на большинстве крытых стрельбищ. Любой стрелок, рассматривающий возможность покупки патронов, заряженных сталью, для целей, отличных от охоты, должен сначала убедиться, что их использование не создаст неоправданной опасности для себя и окружающих. Однако данные, подтверждающие опасность стрельбы высокоскоростными патронами, заряженными стальной дробью, вызывающей износ ствола, не опубликованы, и американский аналог C.I.P., SAAMI, не имеет таких ограничительных требований к скорости коммерческих патронов со стальной дробью, продаваемых в Соединенных Штатах. Аналогично, производители дробовиков, продающие дробовики в Соединенных Штатах, самостоятельно устанавливают соответствующие стандарты твердости стали для стволов дробовиков и скорости патронов со стальной дробью. Некоторые крытые стрельбища запрещают использование стальной дроби из-за опасений, что при попадании в объект на дистанции она может вызвать искру и привести к пожару.
Garden guns are smooth bore firearms specifically made to fire .22 caliber snake shot, and are commonly used by gardeners and farmers for pest control. Garden guns are short range weapons that can do little harm past 15 to 20 yards, and they are quiet when fired with snake shot, compared to a standard ammunition. These guns are especially effective inside of barns and sheds, as the snake shot will not shoot holes in the roof or walls, or more importantly injure livestock with a ricochet. They are also used for pest control at airports, warehouses, stockyards, etc. In 1976 the United States Fish and Wildlife Service took the first steps toward phasing out lead shot by designating steel shot only hunting zones for waterfowl. In the 1970s lead free shot shell ammunition loaded with steel, bismuth, or tungsten composite pellets instead of more traditional lead based pellets was introduced and required for Migratory Bird Hunting (Ducks & Geese). Lead shot in waterfowl hunting was banned throughout the United States in 1991. Due to environmental regulations, lead loaded ammunition must be used carefully by hunters in Europe. For instance, in France, it cannot be fired in the vicinity of a pond. In fact, the laws are so complex that some hunters in Europe prefer not to risk getting into problems for firing lead pellets in the wrong places, so they opt for composite pellets in all situations. The use of lead shot is banned in Canada and the United States when hunting migratory game birds, such as ducks and geese, forcing the use of non toxic shot in these countries for waterfowl hunting (lead shot can still legally be used in the United States for hunting game other than waterfowl). This means that manufacturers need to market new types of lead free shotgun ammunition loaded with alternative pellets to meet environmental restrictions on the use of lead, as well as lead based and cheaper shotshell ammunition, to remain competitive worldwide. The C. I. P. enforces approval of all ammunition a manufacturer or importer intends to sell in any of the (mainly European) C. I. P. member states. The ammunition manufacturing plants are obliged to test their products during production against the C. I. P. pressure specifications. A compliance report must be issued for each production lot and archived for later verification if needed. Besides pressure testing, shotshells containing steel pellets require an additional Vickers hardness test. The steel pellets used must have a hardness under 100 HV1, but, even so, steel is known to wear the barrel excessively over time if the steel pellet velocities become too high, leading to potentially harmful situations for the user. As a result, the measurement of pellet velocity is also an additional obligation for shotshells in 12 , 16 , and 20 gauges in both standard and high performance versions sold in Europe. The velocity of pellets must be below , and respectively for the standard versions. Another disadvantage of steel pellets is their tendency to ricochet unpredictably after striking any hard surface. This poses a major hazard at indoor ranges or whenever metal targets or hard backstops (e. g. concrete wall vs. a dirt berm) are used. For this reason, steel shot is explicitly banned at most indoor shooting ranges. Any shooters who are considering buying ammo loaded with steel for anything other than hunting purposes should first find out if using it won't cause undue hazard to themselves and others. However, data supporting the danger of firing high velocity shells loaded with steel shot causing barrel wear has not been published and the US equivalent of CIP, SAAMI, does not have any such restrictive limitations on the velocity of commercial steel shotshells sold in the United States. Similarly, shotgun manufacturers selling shotguns in the United States select their own appropriate standards for setting steel hardness for shotgun barrels and for velocities of steel shotshell loaded ammunition. Some indoor shooting ranges prohibit the use of steel shot over concern of it causing a spark when hitting an object down range and causing a fire.
Размеры выстрелов
Дробовые патроны заряжаются дробинами разного калибра в зависимости от цели. Для стрельбы по стенду (скеету) используется мелкая дробь, такая как №8 или №9, поскольку дистанция небольшая и требуется плотный убойный рисунок. Стрельба по тарелкам (трапу) требует большей дальности, поэтому используется дробь большего калибра, обычно №7½. При охоте на дичь учитывается дальность и глубина проникновения, необходимые для гарантированного чистого подстрела. Дробь очень быстро теряет скорость из-за низкой удельной плотности и баллистического коэффициента (см. внешнюю баллистику). Мелкая дробь, используемая для стрельбы по стенду и тарелкам, теряет всю значимую энергию примерно на 90 метрах, поэтому площадки для стрельбы по стенду и тарелкам могут располагаться относительно близко к населенным пунктам с незначительным риском травмирования находящихся за пределами площадки.
Shotshells are loaded with different sizes of shot depending on the target. For skeet shooting, a small shot such as a No. 8 or No. 9 would be used, because range is short and a high density pattern is desirable. Trap shooting requires longer shots, and so a larger shot, usually #7 1/2 is used. For hunting game, the range and penetration needed to assure a clean kill is considered. Shot loses its velocity very quickly due to its low sectional density and ballistic coefficient (see external ballistics). Small shot, like that used for skeet and trap, will have lost all appreciable energy by around , which is why trap and skeet ranges can be located in relatively close proximity to inhabited areas with negligible risk of injury to those outside the range.
Стрельба в птицу
Дробовые заряды предназначены для использования на охоте на водоплавающую и пернатую дичь, где объекты охоты – проворные мелкие и средние птицы. Номера дроби соответствуют номерам калибров дробовиков – чем меньше число, тем крупнее дробь (за исключением устаревшей шведской системы, где нумерация обратная). Обычно дробовые заряды называют просто «дробью», например, «дробь номер 9» или «дробь BB». Чтобы усложнить ситуацию, размеры американской, стандартной (европейской), бельгийской, итальянской, норвежской, испанской, шведской, британской и австралийской дроби незначительно различаются. Это связано с тем, что в одних системах диаметр указывается в дюймах (американская), в других – в миллиметрах (европейская), а в британской системе – по количеству свинцовых дробин на унцию. В Австралии используется гибридная система, поскольку рынок страны насыщен смесью британских, американских и европейских патронов. Для американской дроби полезным способом запомнить диаметр дроби в дюймах является простое вычитание номера дроби из 17. Полученный результат – диаметр дроби в сотых долях дюйма. Например, дробь №2 дает 17–2 = 15, что означает, что диаметр дроби №2 равен 15/100 или дробь B. Размеры увеличиваются с шагом для дроби BB и BBB. В метрической системе легко запомнить, что дробь №5 имеет диаметр 3 мм; каждое увеличение или уменьшение номера соответствует изменению диаметра на 0,25 мм, поэтому, например, дробь №7 имеет диаметр 2,5 мм.
Birdshots are designed to be used for waterfowl and upland hunting, where the game is agile small/medium sized birds. Their sizes are numbered similarly to the shotgun gauges—the smaller the number, the larger the shot (except in the obsolete Swedish system, in which it is reversed). Generally birdshot is just called "shot", such as "number 9 shot" or "BB shot". To make matters more complex, there are small differences in the size of American, Standard (European), Belgian, Italian, Norwegian, Spanish, Swedish, British, and Australian shot. That is because some systems go by diameter in inches (American), some go by diameter in millimeters (European), and the British system goes by the number of lead shot per ounce. Australia has a hybrid system due to its market being flooded with a mixture of British, American, and European shells. For American shot, a useful method for remembering the diameter of numbered shot in inches is simply to subtract the shot size from 17. The resulting answer is the diameter of the shot in hundredths of an inch. For example, #2 shot gives 17−2 = 15, meaning that the diameter of #2 shot is 15/100 or B shot is , and sizes go up in increments for BB and BBB sizes. In metric measurement, it is easy to remember that #5 shot is 3 mm; each number up or down represents a 0.25 mm change in diameter, so e. g. #7 shot is 2.5 mm. US Size EU Size SW Size UK Size AU Size Nominal diameterPellets per oz (28 g) Quantity per lb. Lead SteelFF.230" (5.84 mm)35F.220" (5.59 mm)2739TT.210" (5.33 mm)AAA.205" (5.20 mm)AAA.203" (5.16 mm)35TAAA.200" (5.08 mm)3653AA.191" (4.93 mm)40BBBAA.190" (4.83 mm)4462550BBA.180" (4.57 mm)5072650Air RifleBBBB or2/0.177" (4.50 mm)B.170" (4.32 mm)86No. 1BBBB.160" (4.06 mm)72103925No. 17.158" (4.00 mm)No. 2B or No. 1.150" (3.81 mm)871251120No. 26.148" (3.75 mm)No. 3.140" (3.56 mm)1081581370No. 35.138" (3.50 mm)No. 2No. 2.134" (3.40 mm)No. 4.130" (3.30 mm)1351921720No. 44No. 3No. 3.128" (3.25 mm)140No. 5No. 4No. 4.120" (3.05 mm)1702432180No. 53.118" (3.00 mm)No. 6No. 5No. 5.110" (2.79 mm)2253152850No. 62.108" (2.75 mm)No. 51/2No. 51/2.107" (2.72 mm)240No. 6No. 6.102" (2.59 mm)270No. 7.100" (2.54 mm)291423No. 71.098" (2.50 mm)No. 71/2.094" (2.40 mm)No. 71/2No. 7No. 7.095" (2.41 mm)3504903775No. 8No. 71/2.090" (2.29 mm)4106865150No. 800.089" (2.25 mm)No. 8No. 8.087" (2.21 mm)472No. 81/2.085" (2.15 mm)497No. 81/2.083" (2.10 mm)No. 9No. 9No. 9.080" (2.03 mm)5858927400No. 9000.079" (2.00 mm)No. 10.070" (1.78 mm)848No. 10No. 10.070" (1.78 mm)850No. 10.069" (1.75 mm)
Number 11 and number 12 lead shot also exists. Shot of these sizes is used in specialized shotshells designed to be fired at close range (less than four yards) for killing snakes, rats and similar sized animals. Such shells are typically intended to be fired from handguns, particularly revolvers. This type of ammunition is produced by Federal and CCI, among others.
Birdshots are designed to be used for waterfowl and upland hunting, where the game is agile small/medium sized birds. Their sizes are numbered similarly to the shotgun gauges—the smaller the number, the larger the shot (except in the obsolete Swedish system, in which it is reversed). Generally birdshot is just called "shot", such as "number 9 shot" or "BB shot". To make matters more complex, there are small differences in the size of American, Standard (European), Belgian, Italian, Norwegian, Spanish, Swedish, British, and Australian shot. That is because some systems go by diameter in inches (American), some go by diameter in millimeters (European), and the British system goes by the number of lead shot per ounce. Australia has a hybrid system due to its market being flooded with a mixture of British, American, and European shells. For American shot, a useful method for remembering the diameter of numbered shot in inches is simply to subtract the shot size from 17. The resulting answer is the diameter of the shot in hundredths of an inch. For example, #2 shot gives 17−2 = 15, meaning that the diameter of #2 shot is 15/100 or B shot is , and sizes go up in increments for BB and BBB sizes. In metric measurement, it is easy to remember that #5 shot is 3 mm; each number up or down represents a 0.25 mm change in diameter, so e. g. #7 shot is 2.5 mm. US Size EU Size SW Size UK Size AU Size Nominal diameterPellets per oz (28 g) Quantity per lb. Lead SteelFF.230" (5.84 mm)35F.220" (5.59 mm)2739TT.210" (5.33 mm)AAA.205" (5.20 mm)AAA.203" (5.16 mm)35TAAA.200" (5.08 mm)3653AA.191" (4.93 mm)40BBBAA.190" (4.83 mm)4462550BBA.180" (4.57 mm)5072650Air RifleBBBB or2/0.177" (4.50 mm)B.170" (4.32 mm)86No. 1BBBB.160" (4.06 mm)72103925No. 17.158" (4.00 mm)No. 2B or No. 1.150" (3.81 mm)871251120No. 26.148" (3.75 mm)No. 3.140" (3.56 mm)1081581370No. 35.138" (3.50 mm)No. 2No. 2.134" (3.40 mm)No. 4.130" (3.30 mm)1351921720No. 44No. 3No. 3.128" (3.25 mm)140No. 5No. 4No. 4.120" (3.05 mm)1702432180No. 53.118" (3.00 mm)No. 6No. 5No. 5.110" (2.79 mm)2253152850No. 62.108" (2.75 mm)No. 51/2No. 51/2.107" (2.72 mm)240No. 6No. 6.102" (2.59 mm)270No. 7.100" (2.54 mm)291423No. 71.098" (2.50 mm)No. 71/2.094" (2.40 mm)No. 71/2No. 7No. 7.095" (2.41 mm)3504903775No. 8No. 71/2.090" (2.29 mm)4106865150No. 800.089" (2.25 mm)No. 8No. 8.087" (2.21 mm)472No. 81/2.085" (2.15 mm)497No. 81/2.083" (2.10 mm)No. 9No. 9No. 9.080" (2.03 mm)5858927400No. 9000.079" (2.00 mm)No. 10.070" (1.78 mm)848No. 10No. 10.070" (1.78 mm)850No. 10.069" (1.75 mm)
Number 11 and number 12 lead shot also exists. Shot of these sizes is used in specialized shotshells designed to be fired at close range (less than four yards) for killing snakes, rats and similar sized animals. Such shells are typically intended to be fired from handguns, particularly revolvers. This type of ammunition is produced by Federal and CCI, among others.
Существуют также дробовые заряды №11 и №12. Дробь этих размеров используется в специализированных патронах, предназначенных для стрельбы с очень близкого расстояния (менее четырех ярдов) для уничтожения змей, крыс и животных аналогичного размера. Такие патроны обычно предназначены для стрельбы из пистолетов, особенно револьверов. Этот тип боеприпасов производится, в частности, компаниями Federal и CCI.
Birdshots are designed to be used for waterfowl and upland hunting, where the game is agile small/medium sized birds. Their sizes are numbered similarly to the shotgun gauges—the smaller the number, the larger the shot (except in the obsolete Swedish system, in which it is reversed). Generally birdshot is just called "shot", such as "number 9 shot" or "BB shot". To make matters more complex, there are small differences in the size of American, Standard (European), Belgian, Italian, Norwegian, Spanish, Swedish, British, and Australian shot. That is because some systems go by diameter in inches (American), some go by diameter in millimeters (European), and the British system goes by the number of lead shot per ounce. Australia has a hybrid system due to its market being flooded with a mixture of British, American, and European shells. For American shot, a useful method for remembering the diameter of numbered shot in inches is simply to subtract the shot size from 17. The resulting answer is the diameter of the shot in hundredths of an inch. For example, #2 shot gives 17−2 = 15, meaning that the diameter of #2 shot is 15/100 or B shot is , and sizes go up in increments for BB and BBB sizes. In metric measurement, it is easy to remember that #5 shot is 3 mm; each number up or down represents a 0.25 mm change in diameter, so e. g. #7 shot is 2.5 mm. US Size EU Size SW Size UK Size AU Size Nominal diameterPellets per oz (28 g) Quantity per lb. Lead SteelFF.230" (5.84 mm)35F.220" (5.59 mm)2739TT.210" (5.33 mm)AAA.205" (5.20 mm)AAA.203" (5.16 mm)35TAAA.200" (5.08 mm)3653AA.191" (4.93 mm)40BBBAA.190" (4.83 mm)4462550BBA.180" (4.57 mm)5072650Air RifleBBBB or2/0.177" (4.50 mm)B.170" (4.32 mm)86No. 1BBBB.160" (4.06 mm)72103925No. 17.158" (4.00 mm)No. 2B or No. 1.150" (3.81 mm)871251120No. 26.148" (3.75 mm)No. 3.140" (3.56 mm)1081581370No. 35.138" (3.50 mm)No. 2No. 2.134" (3.40 mm)No. 4.130" (3.30 mm)1351921720No. 44No. 3No. 3.128" (3.25 mm)140No. 5No. 4No. 4.120" (3.05 mm)1702432180No. 53.118" (3.00 mm)No. 6No. 5No. 5.110" (2.79 mm)2253152850No. 62.108" (2.75 mm)No. 51/2No. 51/2.107" (2.72 mm)240No. 6No. 6.102" (2.59 mm)270No. 7.100" (2.54 mm)291423No. 71.098" (2.50 mm)No. 71/2.094" (2.40 mm)No. 71/2No. 7No. 7.095" (2.41 mm)3504903775No. 8No. 71/2.090" (2.29 mm)4106865150No. 800.089" (2.25 mm)No. 8No. 8.087" (2.21 mm)472No. 81/2.085" (2.15 mm)497No. 81/2.083" (2.10 mm)No. 9No. 9No. 9.080" (2.03 mm)5858927400No. 9000.079" (2.00 mm)No. 10.070" (1.78 mm)848No. 10No. 10.070" (1.78 mm)850No. 10.069" (1.75 mm)
Number 11 and number 12 lead shot also exists. Shot of these sizes is used in specialized shotshells designed to be fired at close range (less than four yards) for killing snakes, rats and similar sized animals. Such shells are typically intended to be fired from handguns, particularly revolvers. This type of ammunition is produced by Federal and CCI, among others.
Выбор снимка птицы
Для охоты размер дроби должен быть выбран не только с учетом дальности, но и вида дичи. Дробь должна достигать цели с достаточной энергией для проникновения на глубину, необходимую для поражения дичи. Свинцовая дробь по-прежнему демонстрирует лучшие баллистические характеристики, однако экологические ограничения на использование свинца, особенно при охоте на водоплавающую дичь, требуют применения стальной, висмутовой или вольфрамовой дроби. Сталь, будучи значительно менее плотной, чем свинец, требует дроби большего калибра, но является хорошим выбором, когда использование свинца запрещено и важна стоимость. Существует мнение, что стальную дробь нельзя безопасно использовать в некоторых старых ружьях без риска повреждения ствола или дульного сужения из-за ее твердости. Однако, гораздо большей проблемой является повышенное давление в большинстве стальных патронов, которое создает большую нагрузку на затвор ружья. Поскольку вольфрам очень твердый, его также следует использовать с осторожностью в старых ружьях. Вольфрамовая дробь часто легируется никелем и железом для смягчения основного металла. Этот сплав примерно на треть плотнее свинца, но значительно дороже. Бисмутовая дробь по плотности и стоимости занимает промежуточное положение между стальной и вольфрамовой. Общепринятое правило при переходе со свинцовой дроби на стальную – увеличение калибра на два номера. Однако существуют разные точки зрения относительно плотности дробового заряда и энергии каждой дробины.
For hunting, shot size must be chosen not only for the range, but also for the game. The shot must reach the target with enough energy to penetrate to a depth sufficient to kill the game. Lead shot is still the best ballistic performer, but environmental restrictions on the use of lead, especially with waterfowl, require steel, bismuth, or tungsten composites. Steel, being significantly less dense than lead, requires larger shot sizes, but is a good choice when lead is not legal and cost is a consideration. It is argued that steel shot cannot safely be used in some older shotguns without causing damage to either the bore or to the choke due to the hardness of steel shot. However, the increased pressure in most steel cartridges is a far greater problem, causing more strain to the breech of the gun. Since tungsten is very hard, it must also be used with care in older guns. Tungsten shot is often alloyed with nickel and iron, softening the base metal. That alloy is approximately 1/3 denser than lead, but far more expensive. Bismuth shot falls between steel and tungsten shot in both density and cost. The rule of thumb in converting appropriate steel shot is to go up by two numbers when switching from lead. However, there are different views on dense patterns versus higher pellet energies. Game Lead/Tungsten Steel Choke GaugeTurkey BB to 6 2 to 3 Full 10, 12, 16, 20Geese 2 to 4 T to 3 Full, Modified 10, 12, 16, 20Ducks, high 2 to 4 BB to 2 Full, Improved Modified, Modified 10, 12, 16, 20Ducks, low 4 to 6 1 to 4 Full, Improved Modified, Modified 10, 12, 16, 20Squirrel 4 to 6 2 to 4 Full, Improved Modified, Modified 12, 16, 20, 28, .410Rabbit 4 to 7 1/2 2 to 5 Modified, Improved Cylinder 12, 16, 20, 28, .410Pheasant 4 to 7 1/2 2 to 6 Full, Improved Modified, Modified, Improved Cylinder 12, 16, 20Grouse Partridge 5 to 8 3 to 6 Modified, Improved Cylinder 12, 16, 20Quail, dove 7 1/2 to 9 6 Improved Modified, Modified, Improved Cylinder 12, 16, 12, 28Rail, Snipe, Woodcock 7 1/2 to 9 6 Modified, Improved Cylinder 12, 16, 20
For hunting, shot size must be chosen not only for the range, but also for the game. The shot must reach the target with enough energy to penetrate to a depth sufficient to kill the game. Lead shot is still the best ballistic performer, but environmental restrictions on the use of lead, especially with waterfowl, require steel, bismuth, or tungsten composites. Steel, being significantly less dense than lead, requires larger shot sizes, but is a good choice when lead is not legal and cost is a consideration. It is argued that steel shot cannot safely be used in some older shotguns without causing damage to either the bore or to the choke due to the hardness of steel shot. However, the increased pressure in most steel cartridges is a far greater problem, causing more strain to the breech of the gun. Since tungsten is very hard, it must also be used with care in older guns. Tungsten shot is often alloyed with nickel and iron, softening the base metal. That alloy is approximately 1/3 denser than lead, but far more expensive. Bismuth shot falls between steel and tungsten shot in both density and cost. The rule of thumb in converting appropriate steel shot is to go up by two numbers when switching from lead. However, there are different views on dense patterns versus higher pellet energies. Game Lead/Tungsten Steel Choke GaugeTurkey BB to 6 2 to 3 Full 10, 12, 16, 20Geese 2 to 4 T to 3 Full, Modified 10, 12, 16, 20Ducks, high 2 to 4 BB to 2 Full, Improved Modified, Modified 10, 12, 16, 20Ducks, low 4 to 6 1 to 4 Full, Improved Modified, Modified 10, 12, 16, 20Squirrel 4 to 6 2 to 4 Full, Improved Modified, Modified 12, 16, 20, 28, .410Rabbit 4 to 7 1/2 2 to 5 Modified, Improved Cylinder 12, 16, 20, 28, .410Pheasant 4 to 7 1/2 2 to 6 Full, Improved Modified, Modified, Improved Cylinder 12, 16, 20Grouse Partridge 5 to 8 3 to 6 Modified, Improved Cylinder 12, 16, 20Quail, dove 7 1/2 to 9 6 Improved Modified, Modified, Improved Cylinder 12, 16, 12, 28Rail, Snipe, Woodcock 7 1/2 to 9 6 Modified, Improved Cylinder 12, 16, 20
Стрелка
Более крупные размеры дроби, достаточно большие, чтобы их нужно было тщательно укладывать в гильзу, а не просто засыпать или заливать, называются "букшот" или просто "бук". Buckshot используется для охоты на среднюю и крупную дичь, в качестве тактического патрона для сотрудников правоохранительных органов и военнослужащих, а также для личной самообороны. Размер дроби чаще всего обозначается серией цифр и букв, при этом меньшие числа указывают на больший размер дроби. Размеры больше "0" обозначаются несколькими нулями. "00" (обычно произносится как "double aught" в североамериканском английском) – наиболее распространенный размер. Британская система обозначения размера buckshot основана на количестве дроби в унции. Размеры: LG (large grape – большой виноград, от виноградной дроби, использовавшейся в мушкетах), MG (medium grape – средний виноград) и SG (small grape – малый виноград). Для мелкой дичи дробь SSG составляет половину веса SG, дробь SSSG – половину веса SSG, дробь SSSSG – половину веса SSSG и так далее. Австралийская система аналогична, за исключением того, что в ней есть 00 SG – патрон для мелкой дичи, заряженный дробью 00. Патроны 12 калибра с дробью 00 обычно доступны в вариантах, содержащих от 8 (восемь) до 18 (восемнадцать) дробин в стандартных длинах гильз (2 3/4 дюйма, 3 дюйма и 3 1/2 дюйма). Патроны 00 с уменьшенной отдачей часто используются в качестве тактических и самооборонных патронов, снижая нагрузку на стрелка и повышая скорость повторных выстрелов.
Larger sizes of shot, large enough that they must be carefully packed into the shell rather than simply dumped or poured in, are called "buckshot" or just "buck". Buckshot is used for hunting medium to large game, as a tactical round for law enforcement and military personnel, and for personal self defense. Buckshot size is most commonly designated by a series of numbers and letters, with smaller numbers indicating larger shot. Sizes larger than "0" are designated by multiple zeros. "00" (usually pronounced "double aught" in North American English) is the most commonly sold size. The British system for designating buckshot size is based on the amount of shot per ounce. The sizes are LG (large grape – from grapeshot derived from musket shooting), MG (medium grape), and SG (small grape). For smaller game, SSG shot is half the weight of SG, SSSG shot is half the weight of SSG, SSSSG shot is half the weight of SSSG, and so on. The Australian system is similar, except that it has 00 SG, a small game shell filled with 00 buckshot. Loads of 12 gauge 00 buckshot are commonly available in cartridges holding from 8 (eight) to 18 (eighteen) pellets in standard shell lengths (2 3/4 inches, 3 inches, and 3 1/2). Reduced recoil 00 buckshot shells are often used as tactical and self defense rounds, minimizing shooter stress and improving the speed of follow up shots. US SizeUK SizeAU Size Nominal diameter Pellets/oz (28 g) LeadSteelTri Ball 12 [12 Gauge] 0.60" (15.2 mm) 1.4 Tri Ball 20 [20 Gauge] 0.52" (13.2 mm) 2.1#0000 Buck.375" (9.525 mm)~5.6#000 BuckLG (Larger Grape).36" (9.1 mm)6.2MG (Medium Grape).346" (8.79 mm)7SG (Small Grape).332" (8.44 mm)8#00 Buck00 SG.330" (8.38 mm)8#0 Buck.32" (8.1 mm)9#1 Buck.30" (7.6 mm)11Special SG (Special Small Grape).298" (7.57 mm)11#2 BuckSSG (Small Small Grape).27" (6.9 mm)14SSG.269" (6.83 mm)15#3 Buck.25" (6.4 mm)18SSSG.244" (6.3 mm)20#4 Buck.240" (6.10 mm) 21SSSSG.227 (5.77 mm)25F.22" (5.59 mm)2739SSSSS orAAAA.213 (5.41 mm)30AAA.203" (5.16 mm)35T.200" (5.08 mm)3653
Larger sizes of shot, large enough that they must be carefully packed into the shell rather than simply dumped or poured in, are called "buckshot" or just "buck". Buckshot is used for hunting medium to large game, as a tactical round for law enforcement and military personnel, and for personal self defense. Buckshot size is most commonly designated by a series of numbers and letters, with smaller numbers indicating larger shot. Sizes larger than "0" are designated by multiple zeros. "00" (usually pronounced "double aught" in North American English) is the most commonly sold size. The British system for designating buckshot size is based on the amount of shot per ounce. The sizes are LG (large grape – from grapeshot derived from musket shooting), MG (medium grape), and SG (small grape). For smaller game, SSG shot is half the weight of SG, SSSG shot is half the weight of SSG, SSSSG shot is half the weight of SSSG, and so on. The Australian system is similar, except that it has 00 SG, a small game shell filled with 00 buckshot. Loads of 12 gauge 00 buckshot are commonly available in cartridges holding from 8 (eight) to 18 (eighteen) pellets in standard shell lengths (2 3/4 inches, 3 inches, and 3 1/2). Reduced recoil 00 buckshot shells are often used as tactical and self defense rounds, minimizing shooter stress and improving the speed of follow up shots. US SizeUK SizeAU Size Nominal diameter Pellets/oz (28 g) LeadSteelTri Ball 12 [12 Gauge] 0.60" (15.2 mm) 1.4 Tri Ball 20 [20 Gauge] 0.52" (13.2 mm) 2.1#0000 Buck.375" (9.525 mm)~5.6#000 BuckLG (Larger Grape).36" (9.1 mm)6.2MG (Medium Grape).346" (8.79 mm)7SG (Small Grape).332" (8.44 mm)8#00 Buck00 SG.330" (8.38 mm)8#0 Buck.32" (8.1 mm)9#1 Buck.30" (7.6 mm)11Special SG (Special Small Grape).298" (7.57 mm)11#2 BuckSSG (Small Small Grape).27" (6.9 mm)14SSG.269" (6.83 mm)15#3 Buck.25" (6.4 mm)18SSSG.244" (6.3 mm)20#4 Buck.240" (6.10 mm) 21SSSSG.227 (5.77 mm)25F.22" (5.59 mm)2739SSSSS orAAAA.213 (5.41 mm)30AAA.203" (5.16 mm)35T.200" (5.08 mm)3653
Распространение и формирование шаблонов
Большинство современных спортивных ружей имеют сменные дульные сужения, позволяющие стрелку изменять кучность дроби. В некоторых случаях это неудобно; ружье может иметь постоянное дульное сужение, или стрелку, стреляющему по удаляющимся целям, может потребоваться быстро сменить кучность с широкой на узкую, используя одноствольное ружье. Кучность дроби также можно изменить, варьируя характеристики патрона.
Most modern sporting shotguns have interchangeable choke tubes to allow the shooter to change the spread of shot that comes out of the gun. In some cases, it is not practical to do this; the gun might have fixed choke, or a shooter firing at receding targets may want to fire a wide pattern immediately followed by a narrower pattern out of a single barrelled shotgun. The spread of the shot can also be altered by changing the characteristics of the shell.
Более узкие модели
Буферный материал, такой как гранулированный пластик, опилки или аналогичный материал, может быть смешан с дробовым зарядом для заполнения пространства между отдельными дробинами. При выстреле буферный материал сжимается и поддерживает дробовой заряд, уменьшая деформацию, которую испытывают дробины при экстремальном ускорении. Сплавы свинца с антимоном, дробовые заряды с медным покрытием, сталь, висмут и композитные дробовые заряды из вольфрама имеют твердость выше, чем у обычного свинца, и деформируются в меньшей степени. Уменьшение деформации приводит к более плотному распределению дроби, поскольку сферические дробины имеют тенденцию лететь более прямолинейно. Один из импровизированных способов достижения аналогичного эффекта заключается в заливке расплавленного воска или дегтя в дробовой заряд. Это может быть опасно, поскольку считается, что это вызывает повышение давления в патроннике, особенно если часть гильзы остается в стволе и не удаляется перед следующим выстрелом.
A buffering material, such as granulated plastic, sawdust, or similar material can be mixed with the shot to fill the spaces between the individual pellets. When fired, the buffering material compresses and supports the shot, reducing the deformation the shot pellets experience under the extreme acceleration. Antimony lead alloys, copper plated lead shot, steel, bismuth, and tungsten composite shot all have a hardness greater than that of plain lead shot, and will deform less as well. Reducing the deformation will result in tighter patterns, as the spherical pellets tend to fly straighter. One improvised method for achieving the same effect involves pouring molten wax or tar into the mass of shot. This can be dangerous, as it is thought to cause higher chamber pressures—especially if part of the shell remains behind in the barrel and is not cleared before another shot is fired.
Более широкие модели
Стрельба наиболее мягким зарядом приводит к большей деформации дроби и более широкому рассеянию. Это часто встречается в дешевых патронах, поскольку используемый свинец содержит минимальное количество легирующих элементов, таких как сурьма, и является очень мягким. Рассеивающие войлоки – это войлоки, имеющие небольшую пластиковую или бумажную вставку в центре дробового стакана, обычно цилиндрической или крестообразной формы. При выходе дроби из ствола вставка помогает раздвинуть дробь от центра, увеличивая рассеяние. Часто это приводит к непостоянным результатам, хотя современные конструкции значительно превосходят традиционные самодельные решения. Преднамеренно деформированная дробь (сплющенная до эллипсоидальной формы) или кубическая дробь также обеспечит более широкое рассеяние, значительно шире, чем у сферической дроби, и с большей стабильностью, чем у рассеивающих войлоков. Использование рассеивающих войлоков и не сферической дроби запрещено в некоторых соревнованиях. Охотничьи патроны, использующие рассеиватели или не сферическую дробь, обычно называют "патронами для густых зарослей", и они предпочтительны для охоты в районах с плотной растительностью, где дистанция выстрела очень мала.
Shooting the softest possible shot will result in more shot deformation and a wider pattern. This is often the case with cheap ammunition, as the lead used will have minimal alloying elements such as antimony and be very soft. Spreader wads are wads that have a small plastic or paper insert in the middle of the shot cup, usually a cylinder or "X" cross section. When the shot exits the barrel, the insert helps to push the shot out from the center, opening up the pattern. Often these result in inconsistent performance, though modern designs are doing much better than the traditional improvised solutions. Intentionally deformed shot (hammered into ellipsoidal shape) or cubical shot will also result in a wider pattern, much wider than spherical shot, with more consistency than spreader wads. Spreader wads and non spherical shot are disallowed in some competitions. Hunting loads that use either spreaders or non spherical shot are usually called "brush loads", and are favored for hunting in areas where dense cover keeps shot distances very short.
Распространение
Большинство дробовых патронов содержат несколько дробин, чтобы повысить вероятность попадания в цель. Разброс дроби дробовика относится к двумерному рисунку, который эти снаряды (или дробь) оставляют на цели. Охотник, собирающийся охотиться на животное, такое как заяц или рябчик, знает, что встреча с животным произойдет на близком расстоянии — обычно в пределах — и животное будет двигаться очень быстро. Следовательно, идеальным чоком будет цилиндр (наиболее свободный), поскольку охотник хочет, чтобы дробь рассеивалась как можно быстрее. Если бы этот охотник использовал полный чок (наиболее узкий) на , дробь была бы слишком близко друг к другу, что привело бы к ненужному повреждению зайца или, альтернативно, к полному промаху. Это привело бы к потере практически всего мяса, так как оставшееся небольшое количество мяса было бы чрезмерно насыщено дробью и стало бы несъедобным. Используя цилиндр, этот охотник максимизировал бы вероятность подстрелить животное и максимизировал количество съедобного мяса. Напротив, охотник, собирающийся охотиться на гусей, знает, что гусь, вероятно, будет находиться на расстоянии примерно , поэтому этот охотник захочет максимально задержать рассеивание дроби, используя полный чок. Используя полный чок для целей, находящихся на большем расстоянии, стрелок снова максимизирует вероятность подстрелить животное и максимизирует количество съедобного мяса. Это также увеличивает шансы на быструю и гуманную добычу, поскольку цель будет поражена достаточным количеством дроби, чтобы быстро убить животное, а не только ранить его. Для старых дробовиков, имеющих только один фиксированный чок, предназначенных в основном для охоты на зайцев, белок, перепелов, голубей и фазанов с одинаковой вероятностью, часто выбирают улучшенный цилиндр в стволе , что делает дробовик подходящим для использования в качестве универсального охотничьего дробовика, не утяжеляя его. Дробовики с фиксированными чоками, предназначенные для охоты на гусей, напротив, часто оснащаются стволами с полным чоком, большей длины и значительно тяжелее, предназначенными для использования в укрытии против удаленных целей. Оборонительные дробовики с фиксированными чоками обычно имеют цилиндрический чок. Аналогично, дробовики, предназначенные в основном для использования с пулями, неизменно также оснащаются чоком цилиндрического типа.
Most shotgun shells contain multiple pellets in order to increase the likelihood of a target being hit. A shotgun's shot spread refers to the two dimensional pattern that these projectiles (or shot) leave behind on a target. A hunter who intends to hunt an animal such as rabbit or grouse knows that the animal will be encountered at a close range—usually within —and will be moving very quickly. So, an ideal choke would be a cylinder bore (the loosest) as the hunter wants the shot to spread out as quickly as possible. If this hunter were using a full choke (the tightest) at , the shot would be very close together and cause an unnecessarily large amount of damage to the rabbit, or, alternatively, a complete miss of the rabbit. This would waste virtually all of the meat for a hit, as the little amount of meat remaining would be overly laden with shot and rendered inedible. By using a cylinder bore, this hunter would maximize the likelihood of a kill, and maximize the amount of edible meat. Contrarily, a hunter who intends to hunt geese knows that a goose will likely be approximately away, so that hunter would want to delay the spread of the shot as much as possible by using a full choke. By using a full choke for targets that are farther away, the shooter again maximizes the likelihood of a kill, and maximizes the amount of edible meat. This also maximizes the chances of a swift and humane kill as the target would be hit with enough shot to kill quickly instead of only wounding the animal. For older shotguns having only one fixed choke, intended primarily for equally likely use against rabbits, squirrels, quail, doves, and pheasant, an often chosen choke is the improved cylinder, in a barrel, making the shotgun suitable for use as a general all round hunting shotgun, without having excess weight. Shotguns having fixed chokes intended for geese, in contrast, are often found with full choke barrels, in longer lengths, and are much heavier, being intended for fixed use within a blind against distant targets. Defensive shotguns with fixed chokes generally have a cylinder bore choke. Likewise, shotguns intended primarily for use with slugs invariably also are found with a choke that is a cylinder bore.
Эквивалентность драмов
Эквивалентность "драм" иногда всё ещё используется как мера мощности порохового заряда в патроне дробовика. Сегодня это анахроничная величина, представляющая собой эквивалентную мощность патрона дробовика, содержащего эквивалентное количество чёрного пороха, измеренное в драмах avoirdupois. Драм в системе avoirdupois – это масса в 1/256 фунта, 1/16 унции или 27,3 грана. Причина возникновения этой архаичной эквивалентности в том, что когда бездымный порох только появился, требовался способ сопоставления его с привычными зарядами для дробовиков, чтобы продавать патроны. Например, патрон с зарядом в 3 или 3 1/2 драма чёрного пороха был распространённым охотничьим зарядом, а тяжёлый, полный заряд содержал около 4–4 1/2 драм, в то время как патрон с зарядом всего в 2 драма чёрного пороха использовался для тренировочной стрельбы. Охотник, ищущий охотничий или полный заряд и знакомый с зарядами чёрного пороха, точно знал, какой эквивалент будет у патронов с новым бездымным порохом. Однако сегодня это малопонятная величина, отражающая мощность порохового заряда в патроне дробовика. Усложняет ситуацию и то, что эквивалентность "драм" изначально определялась только для патронов 12-го калибра и только для свинцовой дроби, хотя её часто применяют для описания других калибров и даже патронов со стальной дробью. Более того, эквивалентность "драм" появилась примерно через 15 лет после внедрения бездымного пороха, когда необходимость в сопоставлении уже отпала, а патроны с чёрным порохом практически исчезли. На практике сегодня эквивалентность "драм" чаще всего соответствует лишь эквивалентности начальной скорости в футах в секунду (fps), при условии использования свинцовой дроби. Косвенным следствием этой эквивалентности стало то, что стандартные патроны дробовиков должны были сохранять прежние размеры, например, 2 1/2 или 2 3/4 дюйма, чтобы их можно было использовать в существующих дробовиках при переходе на бездымный порох вместо чёрного. Поскольку для достижения той же мощности бездымный порох требовался в меньшем объёме, чем чёрный, объём пороховых войлоков пришлось увеличить, чтобы патрон был достаточно заполнен для правильной обжимки. Сначала это означало укладку большего количества картонных войлоков. В конечном итоге это привело к появлению в конце 1950-х – начале 1960-х годов цельных пластиковых войлоков, которые позволяли увеличить объём и сохранить общую длину патрона. Эквивалентность "драм" не имеет значения при перезарядке патронов дробовика бездымным порохом; загрузка патрона эквивалентным весом в драмах бездымного пороха может привести к взрыву дробовика. Она применима только к перезарядке патронов чёрным порохом.
"Dram" equivalence is sometimes still used as a measure of the powder charge power in a shotgun shell. Today, it is an anachronistic equivalence that represents the equivalent power of a shotgun shell containing this equivalent amount of black powder measured in drams avoirdupois. A dram in the avoirdupois system is the mass of 1/256 pound or 1/16 ounce or 27.3 grains. The reasoning behind this archaic equivalence is that when smokeless powder first came out, some method of establishing an equivalence with common shotgun shell loads was needed in order to sell a box of shotgun shells. For example, a shotgun shell containing a 3 or 3 1/2 dram load of black powder was a common hunting field load, and a heavy full power load would have contained about a 4 to 4 1/2 dram load, whereas a shotgun shell containing only a 2 dram load of black powder was a common target practice load. A hunter looking for a field or full power load familiar with black powder shotgun loads would have known exactly what the equivalence of the shotgun shells would have been in the newly introduced smokeless powder. Today, however, this represents a poorly understood equivalence of the powder charge power in a shotgun shell. To further complicate matters, "dram" equivalence was only defined for 12 gauge shotgun shells, and only for lead shot, although it has often been used for describing other gauges of shells, and even steel shot loaded shells. Furthermore, "dram" equivalence only came around about 15 years after smokeless powder had been introduced, long after the need for an equivalence had started to fade, and actual black powder loaded shotshells had largely vanished. In practice, "dram" equivalence today most commonly equates just to a velocity rating equivalence in fps (feet per second), while assuming lead shot. A secondary impact of this equivalence was that common shotgun shells needed to stay the same size, physically, e. g., 2 1/2 or 2 3/4 inch shells, in order to be used in pre existing shotguns when smokeless powder started being used to load shotgun shells in the place of black powder. As smokeless powder did not have to be loaded in the same volume as black powder to achieve the same power, being more powerful, the volumes of wads had to increase, to fill the shotgun shell enough to permit proper crimps still to be made. Initially, this meant that increased numbers of over powder card wads had to be stacked to achieve the same stack up length. Eventually, this also led to the introduction of one piece plastic wads in the late 1950s through the early 1960s, to add additional wad volumes, in order to maintain the same overall shotgun shell length. Dram equivalence has no bearing on the reloading of shotgun shells with smokeless powder; loading a shotgun shell with an equivalent dram weight of smokeless powder would cause a shotgun to explode. It only has an equivalence in the reloading of shotgun shells with black powder.