Оқ-дәрі патрондары: мылтық оқтары, диаметрі, құрамы (оқ, шоқ, сабын), металл түрлері (мырыш, болат, вольфрам). Қауіпсіздік және тиімділік туралы ақпарат.
Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
Өздігінен толыққан, оқ немесе қатты снарядпен зарядталған патрон.
Self contained cartridge loaded with either shot or a solid slug
Мылтық патроны, оқ-дәрі немесе патрон – мылтықтарда ғана қолданылатын, шеті дөңгелектелген, цилиндрлі (тік қабырғалы) патронның бір түрі. Әдетте, ол көптеген ұсақ, дөңгелек пішіндес, пеллет тәрізді суб-снарядтармен (оқтармен) толтырылады, олар тегіс ұңғыдан, мундштук бөлігіндегі конус тәрізді тарылу арқылы шашырау деңгейін реттейтін арнайы қарудан атылады. Патрон кейде бір ғана үлкен, қатты снарядты – оқты (кейде бұрандалы ұңғылы қарудан атылатын оқты) қамтиды. Патрон корпусы әдетте қағаз немесе пластиктен жасалған түтікшеден тұрады, оның түбі металл қақпақпен жабылады, онда оқ бастағыш орналасқан, ал оқ заряды әдетте патрон ішіндегі ватта/саботпен ұсталған. Патронның калибрі – оның өлшемі деп аталады. Оқ-дәрілер дәстүрлі түрде қорғасыннан жасалады, бірақ қорғасынға қатысты шектеулер немесе оқ зарядының массасын азайту арқылы оқ жылдамдығын арттыру сияқты артықшылықтар үшін болат, вольфрам және висмут сияқты басқа металдар да қолданылады. Сонымен қатар, саботаж флешеттері, резеңке шарлар, тас тұзы және магний сынықтары сияқты ерекше снарядтар да бар. Патрон корпусын резеңке және қабықшалы оқтар сияқты арнайы, өлімге әкелмейтін снарядтармен де жасауға болады. Мылтықтың тиімді ату қашықтығы шамамен соққымен – , құс оғымен – , оқпен – , ал бұрандалы ұңғылы қаруларда саботаж оқтарымен – аса жоғары. Басқа оқ түрлері:
Феррет оқтары: жұқа тосқауылды (мысалы, көлік есігін) тесіп өтіп, газды шығаруға арналған оқтар. Боло оқтары: сыммен байланысқан екі үлкен қорғасын шар. Пиранья оқтары: өткір тікенектермен толтырылған патрон. Аждаһа тынысы оқтары: атылған кезде от шары/жалын құратын, жанатын химиялық заттармен толтырылған патрон, олар жақын қашықтықтағы тұтанғыш нысананы тұтандыра алады. Көптеген мылтық патрондары тегіс ұңғыдан атылу үшін жасалған, себебі "оқ" бұрандалы ұңғыда тым кеңінен тарап кетеді. Бұрандалы ұңғылы қарулар саботаж оқтарының дәлдігін арттырады, бірақ оны оқ ату үшін жарамсыз етеді, өйткені ол оқ стаканына айналуға мәжбүрлейді, оқ шоғырының таралуына себеп болады. Бұрандалы оқ өзінде бұрандалы ойықтарға ие, сондықтан оны тегіс ұңғылы мылтықта да қолдануға болады.
A shotgun shell, shotshell, or shell is a type of rimmed, cylindrical (straight walled) cartridges used specifically in shotguns, and is typically loaded with numerous small, pellet like spherical sub projectiles called shot, fired through a smoothbore barrel with a tapered constriction at the muzzle to regulate the extent of scattering. A shell can sometimes also contain only a single large solid projectile known as a slug (sometimes fired through a rifled slug barrel). The hull usually consists of a paper or plastic tube often covered at the base by a metallic head cover which retains a primer, and the shot charge is typically contained by a wadding/sabot inside the case. The caliber of the shotshell is known as its gauge. The projectiles are traditionally made of lead, but other metals such as steel, tungsten and bismuth are also used due to restrictions on lead, or for performance reasons such as achieving higher shot velocities by reducing the mass of the shot charge. Other unusual projectiles such as saboted flechettes, rubber balls, rock salt and magnesium shards also exist. Shells can also be made with specialty non lethal projectiles such as rubber and bean bag rounds. Shotguns have an effective range of about with buckshot, with birdshot, with slugs, and well over with saboted slugs in rifled barrels. Other rounds include:
Ferret rounds: rounds designed to penetrate a thin barrier (e. g. a car door) and release a gas payload. Bolo rounds: two large lead balls attached by a wire. Piranha rounds: shells full of sharp tacks. Dragon's breath rounds: shells full of incendiary chemicals that create a fireball/flame when discharged, and can ignite a flammable target at close range. Most shotgun shells are designed to be fired from a smoothbore barrel, as "shot" would be spread too wide by rifling. A rifled barrel will increase the accuracy of sabot slugs, but makes it unsuitable for firing shot, as it imparts a spin to the shot cup, causing the shot cluster to disperse. A rifled slug uses rifling on the slug itself so it can be used in a smoothbore shotgun.
Тарих
Ертедегі мылтық оқ-дәрілері мыс қабықшалардан жасалған, ол сол дәуірдегі тапанша мен мылтық патрондарының қабықшаларынан көп ерекшеленбеді. Бұл мыс мылтық қабықшалары немесе корпустары, мылтық оқ-дәрісінің басы мен капсюль бөліктері, сондай-ақ олардың өлшемдері жағынан ірі мылтық патрондарына ұқсас болды. Қағаз, былғары, корктан жасалған картондар, сондай-ақ картон да әртүрлі уақытта қолданылды. Су әйнегі (натрий силикаты) көбінесе осы мыс қабықшаларына жоғарығын жабатын картонды цементтеу үшін пайдаланылды. Бұл ертедегі мыс қабықшаларында дөңгелек немесе бүктемелі жиек қолданылмады, бірақ кейбір өндірушілер кейінірек оқ-дәрінің үстіне жабатын картонды қауіпсіз ұстау үшін дөңгелек жиекті пайдаланды. Бұл алғашқы мылтық оқ-дәрілерінің капсюльдері сол диаметрдегі тапанша капсюльдерімен бірдей болды. 1870-ші жылдардың соңынан бастап қағаз қабықшалар мыс қабықшаларды алмастыра бастады. Қағаз қабықшалар шамамен бір ғасыр бойы танымал болды, 1960 жылдардың басына дейін. Бұл қағаз қабықшаларды пайдаланатын мылтық оқ-дәрілері көбінесе дөңгелек жиектелген, бірақ бүктемелі жиектеу де ақырында танымал болды. Бұл қағаз қабықшалы мылтық оқ-дәрілерінің капсюльдері ертедегі мыс мылтық оқ-дәрілерінде қолданылған тапанша капсюльдерінен, мылтық пен тапанша оқ-дәрілерінен айырмашылығы, оқ-дәрілік зарядты және инелік ұяны қамтитын капсюльге ауысты, бұл мылтық оқ-дәрісінің капсюлін биік етті. Картон, былғары және корктан жасалған картондар, сондай-ақ картон да әртүрлі уақытта қолданылды, біртіндеп ұнтақ үстіне пластик картондарға, картондармен бірге, содан кейін толығымен пластик картондарға жол берді. 1960 жылдардың басынан 1970 жылдардың соңына дейін пластик қабықшалар көптеген мылтық оқ-дәрілерінің қағаз қабықшаларын алмастыра бастады және 1980 жылдардың басында пластик қабықшалар барлық жерде қолданылатын болды.
Early shotgun shells used brass cases, not unlike pistol and rifle cartridge cases of the same era. These brass shotgun hulls or cases closely resembled large rifle cartridges, in terms of both the head and primer portions of the shotgun shell, as well as in their dimensions. Card wads, made of felt, leather, and cork, as well as paperboard, were all used at various times. Waterglass (Sodium silicate) was commonly used to cement the top overshot wad into these brass shell casings. No roll crimp or fold crimp was used on these early brass cases, although roll crimps were eventually used by some manufacturers to hold the overshot wad in place securely. The primers on these early shotgun shells were identical to pistol primers of the same diameter. Starting in the late 1870s, paper hulls began replacing brass hulls. Paper hulls remained popular for nearly a century, until the early 1960s. These shotgun shells using paper hulls were nearly always roll crimped, although fold crimping also eventually became popular. The primers on these paper hull shotgun shells also changed from the pistol primers used on the early brass shotgun shells to a primer containing both the priming charge and an anvil, unlike rifle and pistol ammunition, making the shotgun shell primer taller. Card wads, made of felt and cork, as well as paperboard, were all used at various times, gradually giving way to plastic over powder wads, with card wads, and, eventually, to all plastic wads. Starting from the early 1960s to the late 1970s, plastic hulls started replacing paper hulls for the majority of shotgun shells and by the early 1980s, plastic hulls had become universally adopted.
Үлгілік құрылыс
Қазіргі заманғы мылтық патрондары әдетте пластик корпустан тұрады, оның түбі жұқа мыс немесе қапталған болатпен қапталған. Бұрын қағаз қабықтар кең таралған және әлі де жасалады, сондай-ақ толық мыс қабықтар да бар. Кейбір компаниялар пластиктен жасалғандай көрінетін қабықтарды шығарды, бірақ оларда беріктік үшін қабырға жиегіне кішкентай металл сақина орнатылған. Көбінесе қуатты патрондар "жоғары мыс" қабықтарды пайдаланады, онда мыс қабықтың бүйірлері жоғары созылған, ал жеңіл патрондар "төмен мыс" қабықтарды қолданады. Мыс шын мәнінде айтарлықтай күштілік бермейді, бірақ сыртқы түрінің айырмашылығы атушыларға жоғары және төмен қуатты оқ-дәрілерді тез ажыратуға мүмкіндік береді. Патронның түбі үлкен мылтық капсюлін ұстау үшін жеткілікті қалың, ол мылтық және тапанша патрондары үшін қолданылатын капсюльдерден ұзын. Қазіргі заманғы түтінсіз ұнтақтар, мылтық патрондарында қолданылатын қара ұнтақтан әлдеқайда тиімді, сондықтан ұнтақ аз орын алады. Мылтықтар аздаған мөлшерде қос негізді ұнтақтарды қолданады, бұл тез жанатын тапанша ұнтақтарына тең, құрамында 50%-ға дейін нитроглицерин болуы мүмкін. Ұнтақтан кейін вата немесе төсем келеді. Ватаның басты мақсаты – ұңғы мен ұнтақты араластырмау және газдың ұңғы арқылы шығып кетіп, оққа күш бермей, итеруін қамтамасыз ету. Ватаның құрамында соққыны жұмсартатын элемент және оқтың баррелден шыққанша біріктіріп ұстайтын стақан болуы мүмкін. Қазіргі заманғы вата үш бөліктен тұрады: ұнтақ ватасы, төсем және оқ стаканы, олар жеке немесе бір бөлік болуы мүмкін. Ұнтақ ватасы газды тығыздау (обтурация) қызметін атқарады және ұнтақтың үстіне тығыз орналастырылады; ол қағаз немесе пластиктен жасалған болуы мүмкін. Келесі кезекте төсем келеді, ол қысымда сығылуға арналған, соққыны жұмсартуға және оқтың деформациясын азайтуға арналған; сондай-ақ ол ұнтақ ватасы мен оқ арасындағы қажетті кеңістікті толтыруға да қызмет етеді. Төсемдер көбінесе пластиктен жасалады, бірақ ауыл шаруашылығы малдары немесе жабайы жануарлар жайылатын аймақтарда аң аулау үшін биоразлагаюшы талшықты ваталар жиі артық көріледі. Оқ стаканы – патронның соңғы бөлігі, ол оқтың баррелден төмен жылжуы кезінде бірге ұстап тұрады. Оқ стакандарының бүйірлерінде тіліктер бар, сондықтан олар баррелден шыққаннан кейін ашылып, оқтың кедергісіз ұшуын қамтамасыз етеді. Қолданылатын оқ стакандары да көбінесе пластиктен жасалады. Оқ оқ стаканын толтырады (ол қажетті оқ мөлшерін ұстауға арналған дұрыс ұзындықта болуы керек), содан кейін мылтық патроны қысылады немесе оралып жабылады. Реббелі жиектері бар жалғыз мылтық патроны – 12 калибрлі RAS12, ол RAS 12 жартылай автоматты мылтығы үшін арнайы жасалған.
Modern shotgun shells typically consist of a plastic hull, with the base covered in a thin brass or plated steel covering. As noted previously, paper shells used to be common, and are still made, as are solid brass shells. Some companies have produced what appear to be all plastic shells, although in these there is a small metal ring cast into the rim of the shell to provide strength. Often the more powerful loads will use "high brass" shells, with the brass extended up further along the sides of the shell, while light loads will use "low brass" shells. The brass does not actually provide a significant amount of strength, but the difference in appearance provides shooters with a way to quickly differentiate between high and low powered ammunition. The base of the shell is fairly thick to hold the large shotgun primer, which is longer than primers used for rifle and pistol ammunition. Modern smokeless powders are far more efficient than the original black powder used in shotgun shells, so very little space is actually taken by powder; shotguns use small quantities of double base powders, equivalent to quick burning pistol powders, with up to 50% nitroglycerin. After the powder comes the wadding or wad. The primary purpose of a wad is to prevent the shot and powder from mixing, and to provide a seal that prevents gas from blowing through the shot rather than propelling it. The wad design may also encompass a shock absorber and a cup that holds the shot together until it is out of the barrel. A modern wad consists of three parts, the powder wad, the cushion, and the shot cup, which may be separate pieces or be one part. The powder wad acts as the gas seal (known as obturation), and is placed firmly over the powder; it may be a paper or plastic part. The cushion comes next, and it is designed to compress under pressure, to act as a shock absorber and minimize the deformation of the shot; it also serves to take up as much space as is needed between the powder wad and the shot. Cushions are almost universally made of plastic with crumple zones, although for game shooting in areas grazed by farm stock or wildlife biodegradable fiber wads are often preferred. The shot cup is the last part of the shell, and it serves to hold the shot together as it moves down the barrel. Shot cups have slits on the sides so that they peel open after leaving the barrel, allowing the shot to continue on in flight undisturbed. Shot cups, where used, are also almost universally plastic. The shot fills the shot cup (which must be of the correct length to hold the desired quantity of shot), and the shotgun shell is then crimped, or rolled closed. The only known Shotgun shell using rebated rims is the 12 Gauge RAS12, specially made for the RAS 12 semi automatic shotgun.
Бақшалық қарулар
Бақ тапаншасы – 22 калибрлі, жыланға арналған, тегіс ұңғылы атыс қаруы. Оны бағбандар мен фермерлер зиянкестерді жою үшін жиі қолданады. Бақшалық тапаншалар – қысқа қашықтықтағы қару, 15-20 метрден кейін көп зиян келтірмейді, ал елікпен атылғанда стандартты оқ-дәріге қарағанда тыныш болады. Бұл қарулар, әсіресе, қоралар мен сарайлар ішінде тиімді, себебі елікпен атылған оқтар шатыр немесе қабырғаларды тесіп өткізбейді, сондай-ақ малға кері соққы арқылы зақым келтірмейді. Олар сонымен қатар әуежайларда, қоймаларда, мал базарларында және т.б. зиянкестерді жою үшін қолданылады. 1976 жылы АҚШ-тың Балық және жабайы табиғат қызметі қорғасыннан жасалған оқтарды жоюға алғашқы қадамдар жасады. 1970 жылдары дәстүрлі қорғасыннан жасалған оқтардың орнына болат, висмут немесе вольфрамнан жасалған композиттік оқтармен толтырылған қорғасынсыз оқ-дәрілер енгізілді және көшпелі құстарды (қаздар мен үйректерді) аулау үшін қажет болды. 1991 жылы АҚШ-та су құстарын аулауда қорғасыннан жасалған оқтарға тыйым салынды. Қоршаған ортаны қорғау ережелеріне сәйкес, Еуропадағы аңшылар қорғасыннан жасалған оқ-дәрілерді сақтықпен пайдалануы керек. Мысалы, Францияда оны көл жанында атуға болмайды. Заңдар өте күрделі болғандықтан, Еуропадағы кейбір аңшылар қорғасынды дұрыс емес жерде атып проблема тудырмау үшін, барлық жағдайда композиттік оқтарды таңдайды. Канада мен АҚШ-та иісқойлар мен қаздар сияқты көшпелі құстарды аулау кезінде қорғасыннан жасалған оқтарға тыйым салынған, бұл осы елдерде су құстарын аулау үшін улы емес оқтарды қолдануға мәжбүр етеді (АҚШ-та қорғасыннан жасалған оқтар су құстарынан басқа аң аулау үшін заңды түрде қолданылуы мүмкін). Бұл өндірушілердің қорғасынды пайдаланудағы экологиялық шектеулерді қанағаттандыру үшін басқа да гранулалармен толтырылған қорғасынсыз оқ-дәрілердің жаңа түрлерін, сондай-ақ қорғасыннан жасалған және арзан оқ-дәрілерді нарыққа шығаруын талап етеді, бұл олардың әлемдік деңгейде бәсекеге қабілетті болуы үшін қажет. C.I.P. өндіруші немесе импорттаушы C.I.P. мүше мемлекеттерінің кез келгенінде (көбінесе Еуропа) сатуды жоспарлаған барлық оқ-дәрілердің мақұлдауын қамтамасыз етеді. Оқ-дәрі өндіріс орналастырулары өнімдерін C.I.P. қысым талаптарына сәйкес өндіріс кезінде сынауға міндетті. Әрбір өндіріс партиясы үшін сәйкестік туралы есеп беруі және қажет болған жағдайда кейін тексеру үшін мұрағатталуы тиіс. Қысымды сынаудан басқа, болаттан жасалған гранулалары бар оқ-дәрілерді қосымша Викерс қаттылық сынағынан өткізу қажет. Нәтижесінде, пеллет жылдамдығын өлшеу Еуропада сатылатын стандартты және жоғары өнімділік нұсқаларындағы 12, 16 және 20 калибрлі оқ-дәрілер үшін қосымша талап болып табылады. Пеллеттердің жылдамдығы стандартты нұсқалар үшін төмен болуы керек. Болаттан жасалған гранулалардың тағы бір кемшілігі – олардың қатты бетке соққанда күтпеген жерден кері соққы беруге бейімділігі. Бұл жабық ату полигондарында немесе металл нысаналар немесе қатты артқы тұрақтар (мысалы, бетон қабырға мен топырақ бедер) пайдаланылған кезде үлкен қауіп тудырады. Осы себепті, көбінесе жабық ату полигондарында болаттан жасалған оқтарды атуға тыйым салынған. Оқ-дәрі сатып алуды жоспарлаған кез келген атқыш, егер оны аң аулаудан басқа мақсаттарда қолданса, оның пайдалануы өзіне және басқаларға қауіп тудырмайтынын алдымен анықтауы керек. Алайда, болаттан жасалған оқтарды атудан туындаған қауіптерді растайтын деректер жарияланбаған және АҚШ-тағы C.I.P.-нің эквиваленті SAAMI, АҚШ-та сатылатын коммерциялық болаттан жасалған оқ-дәрілердің жылдамдығына қатысты шектеулер қоймайды. Сонымен қатар, АҚШ-та сапқыштар сатушылар сапқыштардың болаттан жасалған барабандарының қаттылығын және болаттан жасалған оқ-дәрілердің жылдамдығын белгілеу үшін өздерінің тиісті стандарттарын таңдайды. Кейбір жабық ату полигондарында болаттан жасалған оқтарды қолдануға тыйым салынған, себебі олар нысанаға тигенде шығарып, өрт тудыруы мүмкін.
Garden guns are smooth bore firearms specifically made to fire .22 caliber snake shot, and are commonly used by gardeners and farmers for pest control. Garden guns are short range weapons that can do little harm past 15 to 20 yards, and they are quiet when fired with snake shot, compared to a standard ammunition. These guns are especially effective inside of barns and sheds, as the snake shot will not shoot holes in the roof or walls, or more importantly injure livestock with a ricochet. They are also used for pest control at airports, warehouses, stockyards, etc. In 1976 the United States Fish and Wildlife Service took the first steps toward phasing out lead shot by designating steel shot only hunting zones for waterfowl. In the 1970s lead free shot shell ammunition loaded with steel, bismuth, or tungsten composite pellets instead of more traditional lead based pellets was introduced and required for Migratory Bird Hunting (Ducks & Geese). Lead shot in waterfowl hunting was banned throughout the United States in 1991. Due to environmental regulations, lead loaded ammunition must be used carefully by hunters in Europe. For instance, in France, it cannot be fired in the vicinity of a pond. In fact, the laws are so complex that some hunters in Europe prefer not to risk getting into problems for firing lead pellets in the wrong places, so they opt for composite pellets in all situations. The use of lead shot is banned in Canada and the United States when hunting migratory game birds, such as ducks and geese, forcing the use of non toxic shot in these countries for waterfowl hunting (lead shot can still legally be used in the United States for hunting game other than waterfowl). This means that manufacturers need to market new types of lead free shotgun ammunition loaded with alternative pellets to meet environmental restrictions on the use of lead, as well as lead based and cheaper shotshell ammunition, to remain competitive worldwide. The C. I. P. enforces approval of all ammunition a manufacturer or importer intends to sell in any of the (mainly European) C. I. P. member states. The ammunition manufacturing plants are obliged to test their products during production against the C. I. P. pressure specifications. A compliance report must be issued for each production lot and archived for later verification if needed. Besides pressure testing, shotshells containing steel pellets require an additional Vickers hardness test. The steel pellets used must have a hardness under 100 HV1, but, even so, steel is known to wear the barrel excessively over time if the steel pellet velocities become too high, leading to potentially harmful situations for the user. As a result, the measurement of pellet velocity is also an additional obligation for shotshells in 12 , 16 , and 20 gauges in both standard and high performance versions sold in Europe. The velocity of pellets must be below , and respectively for the standard versions. Another disadvantage of steel pellets is their tendency to ricochet unpredictably after striking any hard surface. This poses a major hazard at indoor ranges or whenever metal targets or hard backstops (e. g. concrete wall vs. a dirt berm) are used. For this reason, steel shot is explicitly banned at most indoor shooting ranges. Any shooters who are considering buying ammo loaded with steel for anything other than hunting purposes should first find out if using it won't cause undue hazard to themselves and others. However, data supporting the danger of firing high velocity shells loaded with steel shot causing barrel wear has not been published and the US equivalent of CIP, SAAMI, does not have any such restrictive limitations on the velocity of commercial steel shotshells sold in the United States. Similarly, shotgun manufacturers selling shotguns in the United States select their own appropriate standards for setting steel hardness for shotgun barrels and for velocities of steel shotshell loaded ammunition. Some indoor shooting ranges prohibit the use of steel shot over concern of it causing a spark when hitting an object down range and causing a fire.
Шат өлшемі
Оқ-дәрілер нысанаға қарай әртүрлі өлшемдегі оқтармен зарядталады. Скиттен ату үшін No. 8 немесе No. 9 сияқты кішкентай оқтар қолданылады, себебі қашықтық қысқа және жоғары тығыздықпен оқ жатқан дұрыс. Тұзақтан ату үшін ұзақ қашықтықтар қажет, сондықтан әдетте #7 1/2 оқ қолданылады. Аң аулауда, таза өлтіруге жеткілікті қашықтық пен тереңдік ескеріледі. Оқтың жылдамдығы төмен қима тығыздығы мен баллистикалық коэффициентінің (сыртқы баллистиканы қараңыз) салдарынан өте тез төмендейді. Скит пен тұзақтан атуға қолданылатын кішкентай оқтар шамамен 200 метрде барлық маңызды энергиясын жоғалтады, сондықтан тұзақ пен скит алаңдарын адамдар тұратын жерлерге салыстырмалы түрде жақын орналастыруға болады, бұл алаңнан тыс жерде жарақат алу қаупін азайтады.
Shotshells are loaded with different sizes of shot depending on the target. For skeet shooting, a small shot such as a No. 8 or No. 9 would be used, because range is short and a high density pattern is desirable. Trap shooting requires longer shots, and so a larger shot, usually #7 1/2 is used. For hunting game, the range and penetration needed to assure a clean kill is considered. Shot loses its velocity very quickly due to its low sectional density and ballistic coefficient (see external ballistics). Small shot, like that used for skeet and trap, will have lost all appreciable energy by around , which is why trap and skeet ranges can be located in relatively close proximity to inhabited areas with negligible risk of injury to those outside the range.
Құс ату
Құс ату оқ-дәрілері су құстары мен далалық аң аулауға арналған, ол ойнайтын құстардың епті, кішкентай/орта өлшемді болуын қамтамасыз етеді. Олардың өлшемдері мылтық калибрлеріне ұқсас нөмірленеді – нөмірі неғұрлым кішкентай болса, оқтың диаметрі соғұрлым үлкен болады (ешкімге белгісіз швед жүйесінде керісінше). Әдетте, құс ату оқ-дәрілері жай ғана "оқ" деп аталады, мысалы, "9 номерлі оқ" немесе "BB оқ". Жағдайды одан да күрделі ету үшін, американдық, стандартты (еуропалық), бельгиялық, итальяндық, норвегиялық, испандық, шведтік, британдық және австралиялық оқтардың өлшемдерінде шамалы айырмашылықтар бар. Бұл кейбір жүйелер диаметрін дюйммен (американдық), ал кейбірлері миллиметрмен (еуропалық) өлшейтініне және британдық жүйе бір унциядағы оқтардың санын қолданатынына байланысты. Австралияда нарығы британдық, американдық және еуропалық оқ-дәрілердің қоспасымен толып кеткендіктен гибридтік жүйе бар. Американдық оқтар үшін, нөмірленген оқтың диаметрін дюйммен есте сақтаудың пайдалы тәсілі – оқ өлшемін 17-ден шегеру. Нәтижесінде шығатын сан – оқтың диаметрінің жүзден бір бөлігі. Мысалы, #2 оқ 17−2 = 15 береді, яғни #2 оқтың диаметрі 15/100 дюйм немесе B оқтың диаметрі, ал BB және BBB өлшемдері үшін өлшемдер ұлғаяды. Метрлік өлшемде #5 оқтың 3 мм екенін есте сақтау оңай; әрбір жоғары немесе төмен сан диаметрде 0,25 мм өзгеріс білдіреді, мысалы, #7 оқ 2,5 мм. АҚШ өлшемі ЕО өлшемі SW өлшемі Ұлыбритания өлшемі AU өлшемі Номиналды диаметрі 28 г-ға шашақ мөлшері 1 фунтқа. Болат FF.230" (5.84 мм) 35F.220" (5.59 мм) 2739TT.210" (5.33 мм) AAA.205" (5.20 мм) AAA.203" (5.16 мм) 35TAAA.200" (5.08 мм) 3653AA.191" (4.93 мм) 40BBBAA.190" (4.83 мм) 4462550BBA.180" (4.57 мм) 5072650Пневматикалық мылтықBBBB немесе2/0.177" (4.50 мм) B.170" (4.32 мм) 86No. 1BBBB.160" (4.06 мм) 72103925No. 17.158" (4.00 мм) No. 2B немесе No. 1.150" (3.81 мм) 871251120No. 26.148" (3.75 мм) No. 3.140" (3.56 мм) 1081581370No. 35.138" (3.50 мм) No. 2 No. 2.134" (3.40 мм) No. 4.130" (3.30 мм) 1351921720No. 44 No. 3 No. 3.128" (3.25 мм) 140 No. 5 No. 4 No. 4.120" (3.05 мм) 1702432180No. 53.118" (3.00 мм) No. 6 No. 5 No. 5.110" (2.79 мм) 2253152850No. 62.108" (2.75 мм) No. 51/2 No. 51/2.107" (2.72 мм) 240 No. 6 No. 6.102" (2.59 мм) 270 No. 7.100" (2.54 мм) 291423No. 71.098" (2.50 мм) No. 71/2.094" (2.40 мм) No 71/2 No. 7.095" (2.41 мм) 3504903775No. 8 No. 71/2.090" (2.29 мм) 4106865150No. 800.089" (2.25 мм) No. 8 No. 8.087" (2.21 мм) 472No. 81/2.085" (2.15 мм) 497No. 81/2.083" (2.10 мм) No 9 No. 9 No. 9.080" (2.03 мм) 5858927400 No. 900.079" (2.00 мм) No. 10.070" (1.78 мм) 848 No. 10 No. 10.070" (1.78 мм) 850 No. 10.069" (1.75 мм) No 11 және No 12 қорғасын оқтары да бар. Мұндай өлшемдегі оқтар жыландар, егеуқұйрықтар және олармен салыстырылатын жануарларды өлтіру үшін өте жақын қашықтықтан (4 метрден кем) атуға арналған арнайы оқ-дәрілерде қолданылады. Мұндай оқ-дәрілер әдетте қолдағы қарулардан, әсіресе револьверлерден атылады. Мұндай қару-жарақтарды Federal және CCI сияқты компаниялар шығарады.
Birdshots are designed to be used for waterfowl and upland hunting, where the game is agile small/medium sized birds. Their sizes are numbered similarly to the shotgun gauges—the smaller the number, the larger the shot (except in the obsolete Swedish system, in which it is reversed). Generally birdshot is just called "shot", such as "number 9 shot" or "BB shot". To make matters more complex, there are small differences in the size of American, Standard (European), Belgian, Italian, Norwegian, Spanish, Swedish, British, and Australian shot. That is because some systems go by diameter in inches (American), some go by diameter in millimeters (European), and the British system goes by the number of lead shot per ounce. Australia has a hybrid system due to its market being flooded with a mixture of British, American, and European shells. For American shot, a useful method for remembering the diameter of numbered shot in inches is simply to subtract the shot size from 17. The resulting answer is the diameter of the shot in hundredths of an inch. For example, #2 shot gives 17−2 = 15, meaning that the diameter of #2 shot is 15/100 or B shot is , and sizes go up in increments for BB and BBB sizes. In metric measurement, it is easy to remember that #5 shot is 3 mm; each number up or down represents a 0.25 mm change in diameter, so e. g. #7 shot is 2.5 mm. US Size EU Size SW Size UK Size AU Size Nominal diameterPellets per oz (28 g) Quantity per lb. Lead SteelFF.230" (5.84 mm)35F.220" (5.59 mm)2739TT.210" (5.33 mm)AAA.205" (5.20 mm)AAA.203" (5.16 mm)35TAAA.200" (5.08 mm)3653AA.191" (4.93 mm)40BBBAA.190" (4.83 mm)4462550BBA.180" (4.57 mm)5072650Air RifleBBBB or2/0.177" (4.50 mm)B.170" (4.32 mm)86No. 1BBBB.160" (4.06 mm)72103925No. 17.158" (4.00 mm)No. 2B or No. 1.150" (3.81 mm)871251120No. 26.148" (3.75 mm)No. 3.140" (3.56 mm)1081581370No. 35.138" (3.50 mm)No. 2No. 2.134" (3.40 mm)No. 4.130" (3.30 mm)1351921720No. 44No. 3No. 3.128" (3.25 mm)140No. 5No. 4No. 4.120" (3.05 mm)1702432180No. 53.118" (3.00 mm)No. 6No. 5No. 5.110" (2.79 mm)2253152850No. 62.108" (2.75 mm)No. 51/2No. 51/2.107" (2.72 mm)240No. 6No. 6.102" (2.59 mm)270No. 7.100" (2.54 mm)291423No. 71.098" (2.50 mm)No. 71/2.094" (2.40 mm)No. 71/2No. 7No. 7.095" (2.41 mm)3504903775No. 8No. 71/2.090" (2.29 mm)4106865150No. 800.089" (2.25 mm)No. 8No. 8.087" (2.21 mm)472No. 81/2.085" (2.15 mm)497No. 81/2.083" (2.10 mm)No. 9No. 9No. 9.080" (2.03 mm)5858927400No. 9000.079" (2.00 mm)No. 10.070" (1.78 mm)848No. 10No. 10.070" (1.78 mm)850No. 10.069" (1.75 mm)
Number 11 and number 12 lead shot also exists. Shot of these sizes is used in specialized shotshells designed to be fired at close range (less than four yards) for killing snakes, rats and similar sized animals. Such shells are typically intended to be fired from handguns, particularly revolvers. This type of ammunition is produced by Federal and CCI, among others.
Құс атуды таңдау
Аң аулауда оқ өлшемін таңдау қашықтыққа ғана емес, сонымен қатар аң түріне де байланысты болуы керек. Оқ нысанаға жеткілікті энергиямен жетіп, аңды өлтіру үшін қажетті тереңдікке енуі тиіс. Қорғасын оқ әлі де баллистикалық көрсеткіштер бойынша ең жақсысы, бірақ қорғасынды пайдалануға қойылған экологиялық шектеулер, әсіресе су құстары үшін, болат, висмут немесе вольфрам қоспаларын қажет етеді. Болат, қорғасынға қарағанда әлдеқайда жеңіл болғандықтан, ірі оқ өлшемдерін талап етеді, бірақ қорғасынға рұқсат болмағанда және шығын маңызды болғанда жақсы таңдау болып табылады. Кейбір ескі мылтықтарда болат оқтың қаттылығына байланысты, ұңғымаға немесе тұншыққа зақым келтірмей, қауіпсіз пайдалану мүмкін емес деп есептеледі. Дегенмен, көптеген болаттан жасалған оқ-дәрілердегі қысымның артуы қарудың құлпына көбірек жүктеме түсіреді, бұл үлкен мәселе. Вольфрам өте қатты болғандықтан, ескі қаруларда оны да сақтықпен қолдану керек. Вольфрамды көбінесе никель мен темірмен қорытып, негізгі металды жұмсартады. Бұл қорытпа қорғасыннан шамамен 1/3-ке тығыз, бірақ әлдеқайда қымбат. Висмут оғы тығыздығы және құны жағынан болат пен вольфрам оғының арасында орналасады. Қорғасыннан болатқа ауысқанда, тиісті оқ өлшемін өзгертудің қарапайым ережесі – екі санға көбейту. Алайда, тығыз үлгілерге қарсы жоғары гранул энергиясына қатысты әртүрлі пікірлер бар.
For hunting, shot size must be chosen not only for the range, but also for the game. The shot must reach the target with enough energy to penetrate to a depth sufficient to kill the game. Lead shot is still the best ballistic performer, but environmental restrictions on the use of lead, especially with waterfowl, require steel, bismuth, or tungsten composites. Steel, being significantly less dense than lead, requires larger shot sizes, but is a good choice when lead is not legal and cost is a consideration. It is argued that steel shot cannot safely be used in some older shotguns without causing damage to either the bore or to the choke due to the hardness of steel shot. However, the increased pressure in most steel cartridges is a far greater problem, causing more strain to the breech of the gun. Since tungsten is very hard, it must also be used with care in older guns. Tungsten shot is often alloyed with nickel and iron, softening the base metal. That alloy is approximately 1/3 denser than lead, but far more expensive. Bismuth shot falls between steel and tungsten shot in both density and cost. The rule of thumb in converting appropriate steel shot is to go up by two numbers when switching from lead. However, there are different views on dense patterns versus higher pellet energies. Game Lead/Tungsten Steel Choke GaugeTurkey BB to 6 2 to 3 Full 10, 12, 16, 20Geese 2 to 4 T to 3 Full, Modified 10, 12, 16, 20Ducks, high 2 to 4 BB to 2 Full, Improved Modified, Modified 10, 12, 16, 20Ducks, low 4 to 6 1 to 4 Full, Improved Modified, Modified 10, 12, 16, 20Squirrel 4 to 6 2 to 4 Full, Improved Modified, Modified 12, 16, 20, 28, .410Rabbit 4 to 7 1/2 2 to 5 Modified, Improved Cylinder 12, 16, 20, 28, .410Pheasant 4 to 7 1/2 2 to 6 Full, Improved Modified, Modified, Improved Cylinder 12, 16, 20Grouse Partridge 5 to 8 3 to 6 Modified, Improved Cylinder 12, 16, 20Quail, dove 7 1/2 to 9 6 Improved Modified, Modified, Improved Cylinder 12, 16, 12, 28Rail, Snipe, Woodcock 7 1/2 to 9 6 Modified, Improved Cylinder 12, 16, 20
For hunting, shot size must be chosen not only for the range, but also for the game. The shot must reach the target with enough energy to penetrate to a depth sufficient to kill the game. Lead shot is still the best ballistic performer, but environmental restrictions on the use of lead, especially with waterfowl, require steel, bismuth, or tungsten composites. Steel, being significantly less dense than lead, requires larger shot sizes, but is a good choice when lead is not legal and cost is a consideration. It is argued that steel shot cannot safely be used in some older shotguns without causing damage to either the bore or to the choke due to the hardness of steel shot. However, the increased pressure in most steel cartridges is a far greater problem, causing more strain to the breech of the gun. Since tungsten is very hard, it must also be used with care in older guns. Tungsten shot is often alloyed with nickel and iron, softening the base metal. That alloy is approximately 1/3 denser than lead, but far more expensive. Bismuth shot falls between steel and tungsten shot in both density and cost. The rule of thumb in converting appropriate steel shot is to go up by two numbers when switching from lead. However, there are different views on dense patterns versus higher pellet energies. Game Lead/Tungsten Steel Choke GaugeTurkey BB to 6 2 to 3 Full 10, 12, 16, 20Geese 2 to 4 T to 3 Full, Modified 10, 12, 16, 20Ducks, high 2 to 4 BB to 2 Full, Improved Modified, Modified 10, 12, 16, 20Ducks, low 4 to 6 1 to 4 Full, Improved Modified, Modified 10, 12, 16, 20Squirrel 4 to 6 2 to 4 Full, Improved Modified, Modified 12, 16, 20, 28, .410Rabbit 4 to 7 1/2 2 to 5 Modified, Improved Cylinder 12, 16, 20, 28, .410Pheasant 4 to 7 1/2 2 to 6 Full, Improved Modified, Modified, Improved Cylinder 12, 16, 20Grouse Partridge 5 to 8 3 to 6 Modified, Improved Cylinder 12, 16, 20Quail, dove 7 1/2 to 9 6 Improved Modified, Modified, Improved Cylinder 12, 16, 12, 28Rail, Snipe, Woodcock 7 1/2 to 9 6 Modified, Improved Cylinder 12, 16, 20
Бақ атылған
Үлкен өлшемдегі оқтар, олар қабыққа жай ғана құйып немесе төгудің орнына мұқият салынуы керек, "букшот" немесе жай ғана "бук" деп аталады. Buckshot орташа және ірі аң аулауға, құқық қорғау және әскери қызметкерлер үшін тактикалық оқ ретінде, сондай-ақ жеке өзін-өзі қорғауға қолданылады. Buckshot өлшемі көбінесе сандар мен әріптердің тізбегімен белгіленеді, кішірек сандар үлкен оқты білдіреді. "0"-ден үлкен өлшемдер бірнеше нөлдермен көрсетіледі. "00" (Солтүстік Америка ағылшын тілінде әдетте "қос ноль" деп айтылады) ең көп сатылатын өлшем. Ұлыбританиялық жүйеде buckshot өлшемі ұңғының бір унциясына шаққандағы оқтың мөлшеріне негіделген. Өлшемдер: LG (ірі жүзім – мүшкетовтен атылған жүзімнен шыққан), MG (орта жүзім) және SG (кішкентай жүзім). Кішкентай аң үшін SSG оғы SG оғының салмағының жартысы, SSSG оғы SSG оғының салмағының жартысы, SSSSG оғы SSSG оғының салмағының жартысы және т.б. болып табылады. Австралиялық жүйе ұқсас, бірақ онда 00 SG бар, ол 00 buckshot-пен толтырылған кішкентай аң қабығы. 12 калибрлі 00 buckshot оқтары әдетте стандартты ұзындықтағы (2 3/4 дюйм, 3 дюйм және 3 1/2 дюйм) патрондарда 8 (сегіз) -ден 18 (он сегіз) оққа дейін болады. Азайтылған кері соққысы бар 00 buckshot қабықтары көбінесе тактикалық және өзін-өзі қорғау оқтары ретінде қолданылады, бұл оқ атушының стрессін азайтады және келесі оқтың жылдамдығын жақсартады.
Larger sizes of shot, large enough that they must be carefully packed into the shell rather than simply dumped or poured in, are called "buckshot" or just "buck". Buckshot is used for hunting medium to large game, as a tactical round for law enforcement and military personnel, and for personal self defense. Buckshot size is most commonly designated by a series of numbers and letters, with smaller numbers indicating larger shot. Sizes larger than "0" are designated by multiple zeros. "00" (usually pronounced "double aught" in North American English) is the most commonly sold size. The British system for designating buckshot size is based on the amount of shot per ounce. The sizes are LG (large grape – from grapeshot derived from musket shooting), MG (medium grape), and SG (small grape). For smaller game, SSG shot is half the weight of SG, SSSG shot is half the weight of SSG, SSSSG shot is half the weight of SSSG, and so on. The Australian system is similar, except that it has 00 SG, a small game shell filled with 00 buckshot. Loads of 12 gauge 00 buckshot are commonly available in cartridges holding from 8 (eight) to 18 (eighteen) pellets in standard shell lengths (2 3/4 inches, 3 inches, and 3 1/2). Reduced recoil 00 buckshot shells are often used as tactical and self defense rounds, minimizing shooter stress and improving the speed of follow up shots. US SizeUK SizeAU Size Nominal diameter Pellets/oz (28 g) LeadSteelTri Ball 12 [12 Gauge] 0.60" (15.2 mm) 1.4 Tri Ball 20 [20 Gauge] 0.52" (13.2 mm) 2.1#0000 Buck.375" (9.525 mm)~5.6#000 BuckLG (Larger Grape).36" (9.1 mm)6.2MG (Medium Grape).346" (8.79 mm)7SG (Small Grape).332" (8.44 mm)8#00 Buck00 SG.330" (8.38 mm)8#0 Buck.32" (8.1 mm)9#1 Buck.30" (7.6 mm)11Special SG (Special Small Grape).298" (7.57 mm)11#2 BuckSSG (Small Small Grape).27" (6.9 mm)14SSG.269" (6.83 mm)15#3 Buck.25" (6.4 mm)18SSSG.244" (6.3 mm)20#4 Buck.240" (6.10 mm) 21SSSSG.227 (5.77 mm)25F.22" (5.59 mm)2739SSSSS orAAAA.213 (5.41 mm)30AAA.203" (5.16 mm)35T.200" (5.08 mm)3653
Larger sizes of shot, large enough that they must be carefully packed into the shell rather than simply dumped or poured in, are called "buckshot" or just "buck". Buckshot is used for hunting medium to large game, as a tactical round for law enforcement and military personnel, and for personal self defense. Buckshot size is most commonly designated by a series of numbers and letters, with smaller numbers indicating larger shot. Sizes larger than "0" are designated by multiple zeros. "00" (usually pronounced "double aught" in North American English) is the most commonly sold size. The British system for designating buckshot size is based on the amount of shot per ounce. The sizes are LG (large grape – from grapeshot derived from musket shooting), MG (medium grape), and SG (small grape). For smaller game, SSG shot is half the weight of SG, SSSG shot is half the weight of SSG, SSSSG shot is half the weight of SSSG, and so on. The Australian system is similar, except that it has 00 SG, a small game shell filled with 00 buckshot. Loads of 12 gauge 00 buckshot are commonly available in cartridges holding from 8 (eight) to 18 (eighteen) pellets in standard shell lengths (2 3/4 inches, 3 inches, and 3 1/2). Reduced recoil 00 buckshot shells are often used as tactical and self defense rounds, minimizing shooter stress and improving the speed of follow up shots. US SizeUK SizeAU Size Nominal diameter Pellets/oz (28 g) LeadSteelTri Ball 12 [12 Gauge] 0.60" (15.2 mm) 1.4 Tri Ball 20 [20 Gauge] 0.52" (13.2 mm) 2.1#0000 Buck.375" (9.525 mm)~5.6#000 BuckLG (Larger Grape).36" (9.1 mm)6.2MG (Medium Grape).346" (8.79 mm)7SG (Small Grape).332" (8.44 mm)8#00 Buck00 SG.330" (8.38 mm)8#0 Buck.32" (8.1 mm)9#1 Buck.30" (7.6 mm)11Special SG (Special Small Grape).298" (7.57 mm)11#2 BuckSSG (Small Small Grape).27" (6.9 mm)14SSG.269" (6.83 mm)15#3 Buck.25" (6.4 mm)18SSSG.244" (6.3 mm)20#4 Buck.240" (6.10 mm) 21SSSSG.227 (5.77 mm)25F.22" (5.59 mm)2739SSSSS orAAAA.213 (5.41 mm)30AAA.203" (5.16 mm)35T.200" (5.08 mm)3653
Жарылу және қалыптау
Қазіргі заманғы спорттық мылтықтардың көпшілігінде оқтың таралуын өзгертуге мүмкіндік беретін алмастырылатын тұншықтыратын түтіктер болады. Бірақ кейбір жағдайларда мұны істеу қиынға түсуі мүмкін; мылтықтың тұрақты тұншығы болуы мүмкін, немесе артқа қашып бара жатқан нысанаға атушы бірден кеңірек, содан кейін бір түйірлі мылтықтан тар үлгіде оқ атуды қалауы мүмкін. Оқтың таралуын патронның қасиеттерін өзгерту арқылы да реттеуге болады.
Most modern sporting shotguns have interchangeable choke tubes to allow the shooter to change the spread of shot that comes out of the gun. In some cases, it is not practical to do this; the gun might have fixed choke, or a shooter firing at receding targets may want to fire a wide pattern immediately followed by a narrower pattern out of a single barrelled shotgun. The spread of the shot can also be altered by changing the characteristics of the shell.
Тар үлгілер
Бөлшектердің арасындағы бос кеңістіктерді толтыру үшін, мысалы, ұсақталған пластик, ара шаңы немесе осыған ұқсас материал сияқты буферлік материалды оқ-дәріге араластыруға болады. Оқ атылғанда, буферлік материал қысылып, оқты қолдайды, оқ-дәрінің үдеу кезінде деформациялануын азайтады. Антимон қорытпалы қорғасын, мыс жалатылған қорғасын оқ, болат, висмут және вольфрам композиттік оқтардың бәрі қарапайым қорғасын оқтан қаттырақ және аз деформацияланады. Деформацияны азайту оқтың біркелкірек таралуын қамтамасыз етеді, себебі шар тәрізді оқтар тікелей ұшуға бейім. Осыған ұқсас нәтижеге қол жеткізудің бір жолы - балқытылған балауыз немесе қара шайырды оқ массасына құю. Бұл қауіпті болуы мүмкін, өйткені бұл камерадағы қысымды арттыруы мүмкін, әсіресе егер патронның бөлігі ұңғыда қалса және келесі оқ ату алдында тазартылмаса.
A buffering material, such as granulated plastic, sawdust, or similar material can be mixed with the shot to fill the spaces between the individual pellets. When fired, the buffering material compresses and supports the shot, reducing the deformation the shot pellets experience under the extreme acceleration. Antimony lead alloys, copper plated lead shot, steel, bismuth, and tungsten composite shot all have a hardness greater than that of plain lead shot, and will deform less as well. Reducing the deformation will result in tighter patterns, as the spherical pellets tend to fly straighter. One improvised method for achieving the same effect involves pouring molten wax or tar into the mass of shot. This can be dangerous, as it is thought to cause higher chamber pressures—especially if part of the shell remains behind in the barrel and is not cleared before another shot is fired.
Кеңеу үлгілер
Мүмкіндігінше жұмсақ ату нәтижесінде оқ деформациясы артып, үлгісі кеңейеді. Бұл көбінесе арзан оқ-дәріде кездеседі, себебі қолданылатын қорғасынның құрамында антимон сияқты қорытпа элементтері азы болады және ол өте жұмсақ болады. Spreader wads – бұл оқ сауытының ортасына орналасқан кішкентай пластик немесе қағаз кіріспе, көбінесе цилиндр немесе "X" пішіндес қимасы бар. Оқ стволдан шыққанда, кіріспе оқты ортасынан сыртқа қарай итеріп, үлгіні кеңейтеді. Көбінесе бұл тұрақсыз нәтижелерге әкеледі, бірақ қазіргі заманғы конструкциялар дәстүрлі, қолмен жасалған шешімдерге қарағанда жақсы нәтижелер береді. Белгілі бір мақсатпен деформацияланған (эллипс пішінде соққымен түзетілген) немесе куб тәрізді оқтар да шар тәрізді оқтарға қарағанда әлдеқайда кең үлгі береді және spreader wads-тан гөрі тұрақтырақ болады. Кейбір жарыстарда spreader wads пен шар емес оқтарға тыйым салынады. Аң аулауға арналған оқ-дәрілер, егер spreader wads немесе шар емес оқтарды қолданса, әдетте "жапырақ оқтары" деп аталады және тығыз өсімдіктерде ату қашықтығы өте қысқа болатын аймақтарда аң аулау үшін қолайлы.
Shooting the softest possible shot will result in more shot deformation and a wider pattern. This is often the case with cheap ammunition, as the lead used will have minimal alloying elements such as antimony and be very soft. Spreader wads are wads that have a small plastic or paper insert in the middle of the shot cup, usually a cylinder or "X" cross section. When the shot exits the barrel, the insert helps to push the shot out from the center, opening up the pattern. Often these result in inconsistent performance, though modern designs are doing much better than the traditional improvised solutions. Intentionally deformed shot (hammered into ellipsoidal shape) or cubical shot will also result in a wider pattern, much wider than spherical shot, with more consistency than spreader wads. Spreader wads and non spherical shot are disallowed in some competitions. Hunting loads that use either spreaders or non spherical shot are usually called "brush loads", and are favored for hunting in areas where dense cover keeps shot distances very short.
Таралу
Көптеген мылтық оқтары нысанаға тигізу мүмкіндігін арттыру үшін бірнеше доңғалақтан тұрады. Мылтықтың ату таралуы – бұл оқтардың (немесе шашыратудың) нысанада қалдыратын екі өлшемді бейнесі. Қоян немесе қарақұйрық сияқты аңды аулауға ниеттенген аңшы, аңды жақын қашықтықта кездестіретінін біледі – әдетте, шегінде – және ол өте жылдам қозғалады. Сондықтан, идеалды тұншықтыру – цилиндрлік тесік (ең кең) болуы керек, себебі аңшы доңғалақтардың мүмкіндігінше жылдам таралуын қалайды. Егер бұл аңшы толық тұншықтыруды (ең тарық) қолданса, онда доңғалақтар тым жақын болып орналасады және қоянға қажетсіз үлкен зиян келтіреді немесе, керісінше, қоянды мүлдем жіберіп алуы мүмкін. Бұл соққан еттің барлығын ысырапқа жіберуге әкеледі, өйткені қалған азын-ау ет доңғалақтармен тым толы болып, жеуге жарамсыз болады. Цилиндрлік тесікті пайдаланып, аңшы өлтіру мүмкіндігін арттырып, жеуге жарамды ет мөлшерін максималды деңгейге жеткізеді. Керісінше, қаз аулауға ниеттенген аңшы қаздың шамамен алыста болатынын біледі, сондықтан аңшы толық тұншықтыруды қолдану арқылы доңғалақтардың таралуын мүмкіндігінше кешіктіргісі келеді. Алыстағы нысанаға толық тұншықтыруды қолдану арқылы, атысшы қайтадан өлтіру мүмкіндігін арттырады және жеуге жарамды ет мөлшерін максималды деңгейге жеткізеді. Бұл сонымен қатар жылдам және адами өлтіру мүмкіндігін арттырады, себебі нысанаға жануарды жаралаудың орнына тез өлтіру үшін жеткілікті доңғалақ тигізіледі. Ескі мылтықтардың тек бір тұрақты тұншықтыруы бар, олар негізінен қоян, бақа, кептер және фазанға қарсы қолдануға арналған, көбінесе таңдалған тұншықтыру – бұл барреліндегі жақсартылған цилиндр, бұл мылтықты жалпы мақсаттағы аулау мылтығы ретінде пайдалануға мүмкіндік береді, артық салмақсыз. Қаздарға арналған тұрақты тұншықтыруы бар мылтықтар, керісінше, көбінесе толық тұншықтыру баррелдерімен, ұзартылған ұзындығымен және әлдеқайда ауыр болып келеді, олар алыстағы нысаналарға қарсы соқырдың ішінде тұрақты пайдалануға арналған. Тұрақты тұншықтыруы бар қорғаныс мылтықтарының тұншықтыруы әдетте цилиндрлік тесік болады. Сол сияқты, негізінен оқтармен қолдануға арналған мылтықтар да цилиндрлік тесік тұншықтыруымен кездеседі.
Most shotgun shells contain multiple pellets in order to increase the likelihood of a target being hit. A shotgun's shot spread refers to the two dimensional pattern that these projectiles (or shot) leave behind on a target. A hunter who intends to hunt an animal such as rabbit or grouse knows that the animal will be encountered at a close range—usually within —and will be moving very quickly. So, an ideal choke would be a cylinder bore (the loosest) as the hunter wants the shot to spread out as quickly as possible. If this hunter were using a full choke (the tightest) at , the shot would be very close together and cause an unnecessarily large amount of damage to the rabbit, or, alternatively, a complete miss of the rabbit. This would waste virtually all of the meat for a hit, as the little amount of meat remaining would be overly laden with shot and rendered inedible. By using a cylinder bore, this hunter would maximize the likelihood of a kill, and maximize the amount of edible meat. Contrarily, a hunter who intends to hunt geese knows that a goose will likely be approximately away, so that hunter would want to delay the spread of the shot as much as possible by using a full choke. By using a full choke for targets that are farther away, the shooter again maximizes the likelihood of a kill, and maximizes the amount of edible meat. This also maximizes the chances of a swift and humane kill as the target would be hit with enough shot to kill quickly instead of only wounding the animal. For older shotguns having only one fixed choke, intended primarily for equally likely use against rabbits, squirrels, quail, doves, and pheasant, an often chosen choke is the improved cylinder, in a barrel, making the shotgun suitable for use as a general all round hunting shotgun, without having excess weight. Shotguns having fixed chokes intended for geese, in contrast, are often found with full choke barrels, in longer lengths, and are much heavier, being intended for fixed use within a blind against distant targets. Defensive shotguns with fixed chokes generally have a cylinder bore choke. Likewise, shotguns intended primarily for use with slugs invariably also are found with a choke that is a cylinder bore.
Драмның теңдігі
"Драм" эквиваленті кейде әлі де оқ-дәрідегі ұнтақ зарядының күшін өлшеу үшін қолданылады. Бүгінде бұл – өткенге тән теңдестіру, ол осы көлемдегі қара ұнтақты қамтитын оқ-дәрінің күшіне балама болып табылады және драмдармен өлшенеді. Авоирдупоис жүйесіндегі бір драм – 1/256 фунт немесе 1/16 унция немесе 27.3 грам. Бұл архаикалық теңдестірудің себебі – түтінсіз ұнтақ алғаш пайда болғанда, бір қорап оқ-дәріні сату үшін оны бұрынғы оқ-дәрілермен салыстырудың бір жолы қажет болды. Мысалы, 3 немесе 3 1/2 драм қара ұнтақ бар оқ-дәрі аңшылыққа жиі қолданылатын, ал толық қуатты оқ-дәріде шамамен 4-4 1/2 драм болса, 2 драмдық қара ұнтақ бар оқ-дәрі жаттығу үшін қолданылатын. Қара ұнтақтың оқ-дәрілерімен таныс аңшы, жаңа түтінсіз ұнтақтағы оқ-дәрінің қуаты қандай екенін білген болар. Бірақ бүгінде бұл оқ-дәрідегі ұнтақ зарядының күшіне қатысты нашар түсінілетін теңдестіру. Жағдайды одан әрі қиындататыны – "драм" эквиваленті тек 12 калибрлі оқ-дәрілер үшін және тек қана қорғасыннан жасалған оқтар үшін анықталған, бірақ ол басқа калибрлі оқ-дәрілерді сипаттау үшін де, тіпті болаттан жасалған оқтары бар оқ-дәрілерді сипаттау үшін де жиі қолданылады. Сонымен қатар, "драм" эквиваленті түтінсіз ұнтақ енгізілгеннен кейін шамамен 15 жылдан кейін пайда болды, яғни теңдестіру қажеттігі азайғаннан және қара ұнтақпен зарядталған оқ-дәрілер көбінесе қолданудан шыққаннан кейін пайда болды. Іс жүзінде, бүгінде "драм" эквиваленті көбінесе секундтық жылдамдыққа (fps) теңестіріледі, бірақ оқ-дәріде қорғасын бар деп ескереді. Бұл теңдестірудің тағы бір салдары – түтінсіз ұнтақ қолданыла бастағанда, бұрынғы мылтықтарда қолдану үшін оқ-дәрілердің физикалық өлшемдері (мысалы, 2 1/2 немесе 2 3/4 дюймдік оқ-дәрілер) бірдей болуы керек болды. Түтінсіз ұнтақ қара ұнтақтан аз көлемде қолданылғандықтан, оқ-дәріні дұрыс қысып жабу үшін ұнтақ астына салынатын картон қабаттарының көлемін арттыру қажет болды. Бастапқыда, бұл ұнтақ астына салынатын картон қабаттарының санын арттыруды білдірді. Соңында, 1950 жылдардың соңы мен 1960 жылдардың басында бір бөліктен жасалған пластик ұнтақ астына салынатын қабаттар енгізілді, оқ-дәрінің жалпы ұзындығын сақтау үшін олардың көлемін арттыруға мүмкіндік берді. Драм эквиваленті түтінсіз ұнтақпен оқ-дәріні қайта зарядтауға қатысы жоқ; түтінсіз ұнтақтың драммен тең салмағын қолданып оқ-дәріні зарядтау мылтықтың жарылуына әкелуі мүмкін. Бұл тек қара ұнтақпен оқ-дәріні қайта зарядтау кезінде ғана қолданылады.
"Dram" equivalence is sometimes still used as a measure of the powder charge power in a shotgun shell. Today, it is an anachronistic equivalence that represents the equivalent power of a shotgun shell containing this equivalent amount of black powder measured in drams avoirdupois. A dram in the avoirdupois system is the mass of 1/256 pound or 1/16 ounce or 27.3 grains. The reasoning behind this archaic equivalence is that when smokeless powder first came out, some method of establishing an equivalence with common shotgun shell loads was needed in order to sell a box of shotgun shells. For example, a shotgun shell containing a 3 or 3 1/2 dram load of black powder was a common hunting field load, and a heavy full power load would have contained about a 4 to 4 1/2 dram load, whereas a shotgun shell containing only a 2 dram load of black powder was a common target practice load. A hunter looking for a field or full power load familiar with black powder shotgun loads would have known exactly what the equivalence of the shotgun shells would have been in the newly introduced smokeless powder. Today, however, this represents a poorly understood equivalence of the powder charge power in a shotgun shell. To further complicate matters, "dram" equivalence was only defined for 12 gauge shotgun shells, and only for lead shot, although it has often been used for describing other gauges of shells, and even steel shot loaded shells. Furthermore, "dram" equivalence only came around about 15 years after smokeless powder had been introduced, long after the need for an equivalence had started to fade, and actual black powder loaded shotshells had largely vanished. In practice, "dram" equivalence today most commonly equates just to a velocity rating equivalence in fps (feet per second), while assuming lead shot. A secondary impact of this equivalence was that common shotgun shells needed to stay the same size, physically, e. g., 2 1/2 or 2 3/4 inch shells, in order to be used in pre existing shotguns when smokeless powder started being used to load shotgun shells in the place of black powder. As smokeless powder did not have to be loaded in the same volume as black powder to achieve the same power, being more powerful, the volumes of wads had to increase, to fill the shotgun shell enough to permit proper crimps still to be made. Initially, this meant that increased numbers of over powder card wads had to be stacked to achieve the same stack up length. Eventually, this also led to the introduction of one piece plastic wads in the late 1950s through the early 1960s, to add additional wad volumes, in order to maintain the same overall shotgun shell length. Dram equivalence has no bearing on the reloading of shotgun shells with smokeless powder; loading a shotgun shell with an equivalent dram weight of smokeless powder would cause a shotgun to explode. It only has an equivalence in the reloading of shotgun shells with black powder.