Аэроjet: История американского производителя ракетных двигателей

Defunct American rocket and missile propulsion manufacturer

Aerojet was an American rocket and missile propulsion manufacturer based primarily in Rancho Cordova, California, with divisions in Redmond, Washington, Orange and Gainesville in Virginia, and Camden, Arkansas. Aerojet was owned by GenCorp. In 2013, Aerojet was merged by GenCorp with the former Pratt & Whitney Rocketdyne to form Aerojet Rocketdyne.

Aerojet developed from a 1936 meeting hosted by Theodore von Kármán at his home. Joining von Kármán, who was at the time director of Guggenheim Aeronautical Laboratory at the California Institute of Technology, were a number of Caltech professors and students, including rocket scientist and astrophysicist Fritz Zwicky and explosives expert Jack Parsons, all of whom were interested in the topic of spaceflight. The group continued to occasionally meet, but its activities were limited to discussions rather than experimentation. Their first design was tested on August 16, 1941, consisting of a small cylindrical solid fuel motor attached to the bottom of a plane. Takeoff distance was shortened by half, and the USAAF placed an order for experimental production versions.

As Aerojet downsized, many of their industrial plants were idled, and the company looked for ways to capitalize them. Their massive investment in chemical mixing equipment used to build their solid fuel rockets was later leased to third parties, notably pharmaceutical companies, under the name Aerojet Fine Chemicals. The division was later sold. Aerojet Real Estate was more direct in its actions, leasing entire Aerojet buildings and selling off undeveloped Aerojet land. It owned approximately 12,600 acres (51 km2), located 15 miles (24 km) east of downtown Sacramento. The remaining research and development sections of Aerojet were organized into the Aerospace and Defense division (ADS). They continued to develop and produce liquid fuel, solid fuel, and air breathing engines for strategic and tactical missiles, precision strike missiles, and interceptors required for missile defense. Product applications for defense systems included strategic and tactical missile motors; maneuvering propulsion systems; attitude control systems; and warhead assemblies used in precision weapon systems and missile defense, as well as airframe structures required on the F 22 Raptor aircraft and fire suppression systems for military and commercial vehicles. Their space related products included liquid fuel engines for expendable and reusable launch vehicles, upper stage engines, satellite propulsion, large solid boosters, and integrated propulsion subsystems. Aerojet qualified a 4.5 kW Hall effect thruster electric propulsion system based on technology licensed from the Busek Corporation. Aerojet is under contract to Lockheed Martin to provide the first two shipsets of the new thruster system for the next generation Advanced Extremely High Frequency (AEHF) system, a US Air Force program. Research into the next generation of advanced or "green" monopropellant engines met with mixed success in the 1990s. HAN engines developed under contract to the US Air Force and Missile Defense Agency provided proof of concept.

Aerojet was owned by GenCorp, which is headquartered in Rancho Cordova, California. GenCorp was known as the General Tire & Rubber Company until 1984. On April 27, 2015, the corporate name of the company was officially changed from GenCorp, Inc. to Aerojet Rocketdyne Holdings, Inc. to honor the company's heritage of continuous product innovation and mission success and to recognize its significant contributions to national defense and space exploration for more than 70 years. From 2002, Aerojet grew steadily to more than 3,500 employees in 2008. Aerojet's rocket engine for the Delta II second stage completed a record 268 successful mission launches since 1960 on February 6, 2009. NASA chose Aerojet to provide the primary design and development of Orion (spacecraft) propulsion systems for the Constellation program. In November 2010, Aerojet was selected by NASA for consideration for potential contract awards for heavy lift launch vehicle system concepts and propulsion technologies. In July 2012, GenCorp announced that it was buying Aerojet's competitor, Pratt & Whitney Rocketdyne; the acquisition was completed in 2013.

Aerojet solid fuel technology was under consideration for use in Apollo's Saturn V first stages. In 1963, the U. S. Air Force provided Aerojet General with $3 million in funding to start construction of a manufacturing and testing site several miles southwest of Homestead, Florida. Aerojet acquired the land for the plant less than five miles from Everglades National Park. A facility was constructed where the motors could be built and tested SW 232nd Avenue was renamed "Aerojet Road". A monolithic 21 feet (6 m) rocket motor was designed, which was too big to be transported by rail. A plan was devised where the rocket motors would be transported by barge to Cape Canaveral. To facilitate barges, a canal was dug (C 111) and a drawbridge installed for the U. S. Highway 1 crossing at mile marker 116 This canal became the southernmost freshwater canal in Southeast Florida and was dubbed the "Aerojet Canal". Efforts are being made to remediate the long term environmental damage caused by the canal, which include the redirection of fresh water from Taylor Slough and thus Florida Bay to Barnes Sound. Additionally, a concrete silo was constructed for the rocket motor, 180 feet deep into the Everglades. Aerojet needed a cylindrical chamber that would withstand the force and power a space faring rocket would cause. Aerojet subcontracted the fabrication of 260 inch diameter, 24m long chamber. The chambers were designed in short length, meaning half the size of what the final product would be, hence the names given to the test rockets, SL 1, SL 2 and SL 3. Both motors used a propellant burning rate and nozzle size appropriate for the full length design and were capable of about 1,600,000 kgf thrust for 114 seconds. The large amount of propellant needed for such a rocket was manufactured at the Everglades plant. An ignition motor, a knocked down Polaris missile B3 first stage known as “Blowtorch,” was used to jump start the motor. Between Sept. 25, 1965 and June 17, 1967, three static test firings were done. SL 1 was fired at night, and the flame was clearly visible from Miami 50 km away, producing over 3 million pounds of thrust. SL 2 was fired with similar success and relatively uneventful. SL 3, the third and what would be the final test rocket, used a partially submerged nozzle and produced 2,670,000 kgf thrust, making it the largest solid fuel rocket ever. Problems arose during the third test when, near burnout, the rocket nozzle was ejected, causing propellant made of hydrochloric acids to be spread across wetlands in the Everglades and a few crop fields and homes in Homestead. Many residents of Homestead complained about the damage done, which included paint damage to their cars and the death of thousands of dollars worth of crops. By 1969, NASA had decided to go with liquid fueled engines for the Saturn V rockets, causing the workers of the Everglades plant to be laid off and the abandonment of the facility. In 1986, after NASA had awarded the Space Shuttle booster contract to Morton Thiokol of Utah, Aerojet sued the State of Florida, exercised its options and pulled out of South Florida for good. The company sold most of its land holdings to the South Dade Land Corporation for $6 million. After unsuccessfully trying to farm it, the corporation sold it to Florida for $12 million. County and federal courts were kept busy for years with lawsuits between Aerojet, Dade County and the State of Florida. After losing the Shuttle contract in 1986, Aerojet later traded its remaining 5,100 acres in the wetlands of South Dade for 55,000 acres of environmentally sensitive land belonging to the U. S. Bureau of Land Management in Nevada. Those 5,100 acres surrounding the factory site are now controlled by the South Florida Water Management District and the Florida Fish and Wildlife Conservation Commission as a nature preserve. The Aerojet signage still remains for both the road and canal, and although weather damaged, most of the facility's buildings remain intact. The Nevada property was sold by Aerojet in 1996 to be used for the unbuilt planned community Coyote Springs, Nevada. The AJ 260 2 rocket motor remains in the silo to this day. In 2013, the massive shed structure covering the silo was dismantled and the silo covered with several 33 ton concrete beams. The facility was the subject of documentaries Space Miami and Aerojet Dade: An Unfinished Journey. An urban exploration visit to the site in 2007 was also featured in the documentary Urban Explorers: Into the Darkness.

Aerojet's manufacture, testing and disposal methods led to toxic contamination of both the land and groundwater in the Rancho Cordova area, leading to the designation of a Superfund site. Solvents such as trichloroethylene (TCE) and chloroform and rocket fuel by products such as N Nitrosodimethylamine (NDMA) and perchlorate were discovered in drinking water wells near Aerojet in 1979. Since then, two State agencies and the Environmental Protection Agency have been working with Aerojet to ensure that the company cleans up pollution caused by its operations at the site. Under state and federal enforcement orders, Aerojet installed several systems on the borders of its property to pump out and treat contaminated groundwater. Aerojet has also conducted a number of removal actions for onsite soils, liquids, and sludges. In 2003, groundwater sampling data revealed a plume of contamination extending northwest under Carmichael. Discovery of TCE contamination at the Sacramento facility also led Aerojet to look into possible contamination of the groundwater at Aerojet's Azusa facility, where much of the testing of JATO's and Rocket engines was conducted before those operations were moved to Sacramento. In 1980, it was announced that there was TCE contamination in the groundwater at Aerojet's facility in Azusa in a hearing chaired by State Senator Esteben Torres. In 1985, it was declared a Superfund Site by the EPA as San Gabriel Superfund Site II and the cleanup done under the Baldwin Park Operable Unit. In 1997, it was also discovered that there was also NDMA and Ammonium Perchlorate contamination in this plume and that Aerojet was once again labeled a Potentially Responsible Party (PRP) in this action. Aerojet sold this facility in 2001 to Northrop Grumman Corporation. Aerojet's disposal of toxic material occurred 20 years prior to the establishment of a provisional perchlorate RfD limit of 0.0001 mg/kg/day in 1992 (to have been achieved by all companies by 1995). This limit was increased to 0.0009 mg/kg/day in 1998, and prior to the results from NAS studies, the limit was reduced to 0.00004 mg/kg/day in 2002. The NAS studies disputed the 0.00004 limit, and recommended its current limit of 0.0007 mg/kg/day.

The Aerobee rocket was one of the United States' most produced and productive sounding rockets. Developed by the Aerojet Corporation, the Aerobee was designed to combine the altitude and launching capability of the V 2 with the cost effectiveness and mass production of the WAC Corporal. More than 1000 Aerobees were launched between 1947 and 1985, returning vast amounts of astronomical, physical, aeronomical, and biomedical data.

The Aerojet General X 8 was an unguided, spin stabilized sounding rocket designed to launch a 150 lb (68 kg) payload to 200,000 feet (61.0 km). The X 8 was a version of the prolific Aerobee rocket family.

1.8KS7800 is a solid propellant rocket engine designed by Aerojet. It is used in the AIM 7A, AIM7B and AIM7C Sparrow missiles and the Aerobee 300 300A sounding rocket. The designation 1.8KS7800 means that the engine burns during 1.8 seconds and generates 7,800 pounds of thrust. It had a vacuum thrust of 35kN and chamber pressure of 1000 psi. In a vacuum, it has a specific impulse of 238.8s and a mass flow of 32.09 lb/s. It is approximately 1.3m in length and 0.2 meters in diameter.