Сканер киноплёнки: оцифровка и хранение изображений

Device that digitises film stock
A motion picture film scanner is a device used in digital filmmaking to scan original film for storage as high resolution digital intermediate files. A film scanner scans original film stock: negative or positive print or reversal/IP. Units may scan gauges from 8 mm to 70 mm (8 mm, Super 8, 9.5 mm, 16 mm, Super 16, 35 mm, Super 35, 65 mm and 70 mm) with very high resolution scanning at 2K, 4K, 8K, or 16K resolutions. (2K is approximately 2048×1080 pixels and 4K is approximately 4096×2160 pixels). Film recorders are the opposite of film scanners, copying content from a computer system onto film stock, for preservation or for display using film projectors. Telecines are similar to film scanners.

The front end of a motion picture film scanner is similar to a telecine. The imaging system may be either a charge coupled device (CCD), a complementary metal–oxide–semiconductor (CMOS) or photomultipliers imaging pick up. A lamp is used as the light source in a CCD imaging front end. The CCDs convert the light to the video signals. In a cathode ray tube (CRT) imaging system the CRT (also called a Flying spot tube) is used as the light source and part of the scanning system. Photomultipliers or avalanche photodiodes are used to convert the light to electrical video signals. A prism and/or dichroic mirrors or color filters are used to separate the light into the three: red, green and blue, imaging pick up devices. HDR or high dynamic range is a new system, using a compositing and tone mapping of images to extend the dynamic range beyond the native capability of the capturing device. This may be done by using a triple exposure for the film and then compositing the three back together. Compositing can be done in a workstation in none real time or in the scanner in real time.