Units of energy

Units used to measure energy

Energy is defined via work, so the SI unit of energy is the same as the unit of work – the joule (J), named in honour of James Prescott Joule and his experiments on the mechanical equivalent of heat. In slightly more fundamental terms, 1 is equal to 1 newton metre and, in terms of SI base units

An energy unit that is used in atomic physics, particle physics and high energy physics is the electronvolt (eV). One eV is equivalent to 1.602176634. In spectroscopy the unit cm−1 ≈ 0.0001239842 is used to represent energy since energy is inversely proportional to wavelength from the equation
In discussions of energy production and consumption, the units barrel of oil equivalent and ton of oil equivalent are often used.

The British imperial units and U. S. customary units for both energy and work include the foot pound force (1.3558 J), the British thermal unit (BTU) which has various values in the region of 1055 J, the horsepower hour (2.6845 MJ), and the gasoline gallon equivalent (about 120 MJ).

A unit of electrical energy, particularly for utility bills, is the kilowatt hour (kWh); one kilowatt hour is equivalent to 3.6. Electricity usage is often given in units of kilowatt hours per year or other time period. This is actually a measurement of average power consumption, meaning the average rate at which energy is transferred. One kilowatt hour per year is around 0.11 watts.

Natural gas is often sold in units of energy content or by volume. Common units for selling by energy content are joules or therms. One therm is equal to about Common units for selling by volume are cubic metre or cubic feet. Natural gas in the US is sold in therms or 100 cubic feet (100 ft3 = 1 Ccf). In Australia, natural gas is sold in cubic metres. One cubic metre contains about 38 megajoules. In the most of the world, natural gas is sold in gigajoules.

The calorie is defined as the amount of thermal energy necessary to raise the temperature of one gram of water by 1 Celsius degree, from a temperature of 14.5, at a pressure of 1. For thermochemistry a calorie of 4.184 is used, but other calories have also been defined, such as the International Steam Table calorie of 4.1868. In many regions, food energy is measured in large calories or kilocalories equalling 1000, sometimes written capitalized as Calories. In the European Union, food energy labeling in joules is mandatory, often with calories as supplementary information.

In physics and chemistry, it is common to measure energy on the atomic scale in the non SI, but convenient, units electronvolts (eV). 1 eV is equivalent to the kinetic energy acquired by an electron in passing through a potential difference of 1 volt in a vacuum. It is common to use the SI magnitude prefixes (e. g. milli , mega etc) with electronvolts. Because of the relativistic equivalence between mass and energy, the eV is also sometimes used as a unit of mass. The Hartree (the atomic unit of energy) is commonly used in the field of computational chemistry since such units arise directly from the calculation algorithms without any need for conversion. Historically Rydberg units have been used.

In spectroscopy and related fields it is common to measure energy levels in units of reciprocal centimetres. These units (cm−1) are strictly speaking not energy units but units proportional to energies, with being the proportionality constant.

A gram of TNT releases upon explosion. To define the tonne of TNT, this was standardized to giving a value of for the tonne of TNT.