Вермикомпост: Производство и применение биогумуса дождевыми червями

Product of the composting process using various species of worms

Vermicompost (vermi compost) is the product of the decomposition process using various species of worms, usually red wigglers, white worms, and other earthworms, to create a mixture of decomposing vegetable or food waste, bedding materials, and vermicast. This process is called vermicomposting, with the rearing of worms for this purpose is called vermiculture. Vermicast (also called worm castings, worm humus, worm poop, worm manure, or worm faeces) is the end product of the breakdown of organic matter by earthworms. These excreta have been shown to contain reduced levels of contaminants and a higher saturation of nutrients than the organic materials before vermicomposting. Vermicompost contains water soluble nutrients which may be extracted as vermiwash and is an excellent, nutrient rich organic fertilizer and soil conditioner. It is used in gardening and sustainable, organic farming. Vermicomposting can also be applied for treatment of sewage. A variation of the process is vermifiltration (or vermidigestion) which is used to remove organic matter, pathogens, and oxygen demand from wastewater or directly from blackwater of flush toilets.

Vermicomposting has gained popularity in both industrial and domestic settings because, as compared with conventional composting, it provides a way to treat organic wastes more quickly. In manure composting, it also generates products that have lower salinity levels. The earthworm species (or composting worms) most often used are red wigglers (Eisenia fetida or Eisenia andrei), though European nightcrawlers (Eisenia hortensis, synonym Dendrobaena veneta) and red earthworm (Lumbricus rubellus) could also be used. Red wigglers are recommended by most vermicomposting experts, as they have some of the best appetites and breed very quickly. Users refer to European nightcrawlers by a variety of other names, including dendrobaenas, dendras, Dutch nightcrawlers, and Belgian nightcrawlers. Containing water soluble nutrients, vermicompost is a nutrient rich organic fertilizer and soil conditioner in a form that is relatively easy for plants to absorb. The fraction of soil which has gone through the digestive tract of earthworms is called the drilosphere. Vermicomposting is a common practice in permaculture. Vermiwash can also be obtained from the liquid potion of vermicompost. Vermiwash is found to contain enzyme cocktail of proteases, amylases, urease and phosphatase. Microbiological study of vermiwash reveals that it contains nitrogen fixing bacteria like Azotobactrer sp., Agrobacterium sp. and Rhizobium sp. and some phosphate solublizing bacteria. Laboratory scale trial shows effectiveness of vermiwash on plant growth.

Large scale vermicomposting is practiced in Canada, Italy, Japan, India, Malaysia, the Philippines, and the United States. The vermicompost may be used for farming, landscaping, to create compost tea, or for sale. Some of these operations produce worms for bait and/or home vermicomposting. There are two main methods of large scale vermicomposting, windrow and raised bed. Some systems use a windrow, which consists of bedding materials for the earthworms to live in and acts as a large bin; organic material is added to it. Although the windrow has no physical barriers to prevent worms from escaping, in theory they should not, due to an abundance of organic matter for them to feed on. Often windrows are used on a concrete surface to prevent predators from gaining access to the worm population. The windrow method and compost windrow turners were developed by Fletcher Sims Jr. of the Compost Corporation in Canyon, Texas. The Windrow Composting system is noted as a sustainable, cost efficient way for farmers to manage dairy waste. The second type of large scale vermicomposting system is the raised bed or flow through system. Here the worms are fed an inch of "worm chow" across the top of the bed, and an inch of castings are harvested from below by pulling a breaker bar across the large mesh screen which forms the base of the bed. Because red worms are surface dwellers constantly moving towards the new food source, the flow through system eliminates the need to separate worms from the castings before packaging. Flow through systems are well suited to indoor facilities, making them the preferred choice for operations in colder climates.

For vermicomposting at home, a large variety of bins are commercially available, or a variety of adapted containers may be used. They may be made of old plastic containers, wood, Styrofoam, or metal containers. The design of a small bin usually depends on where an individual wishes to store the bin and how they wish to feed the worms. Some materials are less desirable than others in worm bin construction. Metal containers often conduct heat too readily, are prone to rusting, and may release heavy metals into the vermicompost. Styrofoam containers may release chemicals into the organic material. Some cedars, yellow cedar, and redwood contain resinous oils that may harm worms, although western red cedar has excellent longevity in composting conditions. Hemlock is another inexpensive and fairly rot resistant wood species that may be used to build worm bins. Bins need holes or mesh for aeration. Some people add a spout or holes in the bottom for excess liquid to drain into a tray for collection. The most common materials used are plastic: recycled polyethylene and polypropylene and wood. Worm compost bins made from plastic are ideal, but require more drainage than wooden ones because they are non absorbent. However, wooden bins will eventually decay and need to be replaced. Small scale vermicomposting is well suited to turn kitchen waste into high quality soil amendments, where space is limited. Worms can decompose organic matter without the additional human physical effort (turning the bin) that bin composting requires. Composting worms which are detritivorous (eaters of trash), such as the red wiggler Eisenia fetida, are epigeic (surface dwellers) and together with symbiotic associated microbes are the ideal vectors for decomposing food waste. Common earthworms such as Lumbricus terrestris are anecic (deep burrowing) species and hence unsuitable for use in a closed system. Other soil species that contribute include insects, other worms and molds.

There may be differences in vermicomposting method depending on the climate. It is necessary to monitor the temperatures of large scale bin systems (which can have high heat retentive properties), as the raw materials or feedstocks used can compost, heating up the worm bins as they decay and killing the worms. The most common worms used in composting systems, redworms (Eisenia fetida, Eisenia andrei, and Lumbricus rubellus) feed most rapidly at temperatures of 15–25 °C (59 77 °F). They can survive at 10 °C (50 °F). Temperatures above 30 °C (86 °F) may harm them. This temperature range means that indoor vermicomposting with redworms is possible in all but tropical climates. Other worms like Perionyx excavatus are suitable for warmer climates. If a worm bin is kept outside, it should be placed in a sheltered position away from direct sunlight and insulated against frost in winter.

There are few food wastes that vermicomposting cannot compost, although meat waste and dairy products are likely to putrefy, and in outdoor bins can attract vermin. Green waste should be added in moderation to avoid heating the bin.

Factors affecting the speed of composting include the climate and the method of composting. There are signs to look for to determine whether compost is finished. The finished compost would have an ambient temperature, dark color, and be as moist as a damp sponge. Towards the end of the process, bacteria slow down the rate of metabolizing food or stop completely. There is the possibility of some solid organic matter still being present in the compost at this point, but it could stay in and continue decomposing for the next couple of years unless removed. The compost should be allowed to cure after finished to allow acids to be removed over time so it becomes more neutral, which could take up to three months and results in the compost being more consistent in size. Elevating the maturing compost off the ground can prevent unwanted plant growth. It compost should consistently be slightly damp and should be aerated but does not need to be turned. The curing process can be done in a storage bin or on a tarp.

Vermicompost is ready for harvest when it contains few to no scraps of uneaten food or bedding. These differ on the amount of time and labor involved and whether the vermicomposter wants to save as many worms as possible from being trapped in the harvested compost. The pyramid method of harvesting worm compost is commonly used in small scale vermicomposting, and is considered the simplest method for single layer bins. In this process, compost is separated into large clumps, which is placed back into composting for further breakdown, and lighter compost, with which the rest of the process continues. This lighter mix is placed into small piles on a tarp under the sunlight. The worms instinctively burrow to the bottom of the pile. After a few minutes, the top of the pyramid is removed repeatedly, until the worms are again visible. This repeats until the mound is composed mostly of worms. When harvesting the compost, it is possible to separate eggs and cocoons and return them to the bin, thereby ensuring new worms are hatched. Cocoons are small, lemon shaped yellowish objects that can usually be seen with the naked eye. The cocoons can hold up to 20 worms (though 2–3 is most common). Cocoons can lay dormant for as long as two years if conditions are not conducive for hatching.

Vermicompost can be mixed directly into the soil, or mixed with water to make a liquid fertilizer known as worm tea. The light brown waste liquid, or leachate, that drains into the bottom of some vermicomposting systems is not to be confused with worm tea. It is an uncomposted byproduct from when water rich foods break down and may contain pathogens and toxins. It is best discarded or applied back to the bin when added moisture is needed for further processing. The pH, nutrient, and microbial content of these fertilizers varies upon the inputs fed to worms. Pulverized limestone, or calcium carbonate can be added to the system to raise the pH.

When closed, a well maintained bin is odorless; when opened, it should have little smell—if any smell is present, it is earthy. The smell may also depend on the type of composted material added to the bin. An unhealthy worm bin may smell, potentially due to low oxygen conditions. Worms require gaseous oxygen. Oxygen can be provided by airholes in the bin, occasional stirring of bin contents, and removal of some bin contents if they become too deep or too wet. If decomposition becomes anaerobic from excess wet feedstock added to the bin, or the layers of food waste have become too deep, the bin will begin to smell of ammonia.

Moisture must be maintained above 50%, as lower moisture content will not support worm respiration and can increase worm mortality. Operating moisture content range should be between 70 and 90%, with a suggested content of 70–80% for vermicomposting operations. If decomposition has become anaerobic, to restore healthy conditions and prevent the worms from dying, excess waste water must be reduced and the bin returned to a normal moisture level. To do this, first reduce addition of food scraps with a high moisture content and second, add fresh, dry bedding such as shredded newspaper to your bin, mixing it in well.

Pests such as rodents and flies are attracted by certain materials and odors, usually from large amounts of kitchen waste, particularly meat. Eliminating the use of meat or dairy product in a worm bin decreases the possibility of pests. Predatory ants can be a problem in African countries. In warm weather, fruit and vinegar flies breed in the bins if fruit and vegetable waste is not thoroughly covered with bedding. This problem can be avoided by thoroughly covering the waste by at least of bedding. Maintaining the correct pH (close to neutral) and water content of the bin (just enough water where squeezed bedding drips a couple of drops) can help avoid these pests as well.

Worms generally stay in the bin, but may try to leave the bin when first introduced, or often after a rainstorm when the humidity outside is high. Maintaining adequate conditions in the worm bin and putting a light over the bin when first introducing worms should eliminate this problem.

Commercial vermicomposters test and may amend their products to produce consistent quality and results. Because the small scale and home systems use a varied mix of feedstocks, the nitrogen, phosphorus, and potassium (NPK) content of the resulting vermicompost will also be inconsistent. NPK testing may be helpful before the vermicompost or tea is applied to the garden. In order to avoid over fertilization issues, such as nitrogen burn, vermicompost can be diluted as a tea 50:50 with water, or as a solid can be mixed in 50:50 with potting soil. Additionally, the mucous layer created by worms which surrounds their castings allows for a "time release" effect, meaning not all nutrients are released at once. This also reduces the risk of burning the plants, as is common with the use and overuse of commercial fertilizers.

Vermicomposting is widely used in North America for on site institutional processing of food scraps, such as in hospitals, universities, shopping malls, and correctional facilities. Vermicomposting is used for medium scale on site institutional organic material recycling, such as for food scraps from universities and shopping malls. It is selected either as a more environmentally friendly choice than conventional disposal, or to reduce the cost of commercial waste removal. From 20 July 2020, the State Government of Chhattisgarh India started buying cow dung under the "Godhan Nyay Yojana" Scheme. Cow dung procured under this scheme will be utilised for the production of vermicompost fertilizer.