Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
Carrier Routing System (CRS) – Cisco Systems Inc компаниясы әзірлеген модульдік және таратылған негізгі маршрутизатор, ол қызмет провайдерлеріне кеңейтілген IP Next Generation Network (NGN) инфрақұрылымы арқылы деректер, дауыс және бейне қызметтерін жеткізуге мүмкіндік береді. Желі топологиясында бұл маршрутизаторлар әдетте қызмет провайдері желісінің ядросында немесе шетінде орналасады. Оларды Over the top контент провайдерлері және ірі кәсіпорындар да пайдаланады. Ол SONET арқылы пакеттелген OC3, OC12-ден OC768-ге дейін, ал Ethernet технологиясында 1GE, 10GE-ден 100GE-ге дейін әртүрлі интерфейс жылдамдықтары мен түрлерін қолдайды. Жеке CRS 3 жүйесі 2,2 Тбит/с өнімділікке ие, ал көп шассилі жүйе 322 Тбит/с өнімділікті қамтамасыз ете алады.
Carrier Routing System (CRS) is a modular and distributed core router developed by Cisco Systems Inc that enables service providers to deliver data, voice, and video services over a scalable IP Next Generation Network (NGN) infrastructure. In a network topology, these routers are generally positioned in the core or edge of a service provider network. They are also used by Over the top content providers and large enterprises. It supports a wide range of interface speeds and types such as channelized OC3, OC12 to OC768 on Packet over SONET and from 1GE, 10GE all the way to 100GE on the Ethernet technologies. A standalone CRS 3 system can handle 2.2 Tbit/s and a multi chassis system could be designed to handle 322 Tbit/s.
Сәулет
Автономды тасымалдаушы маршруттау жүйесі желілік карта шассиімен (LCC) орналастырылады. Бұл LCC-нің үш негізгі функционалдық бөлімі – желілік карталар, коммутациялық мата және маршруттық процессор. Желілік карта физикалық интерфейс картасынан және модульдік қызметтер картасынан тұрады. Физикалық қосылыс оптикалық талшық кабельдер немесе жұпталған кабельдер арқылы жүзеге асырылуы мүмкін. Маршруттау шешімдерін маршруттық процессор қабылдайды, ал коммутациялық мата маршруттық процессордың деректеріне сүйене отырып маршрутты жүзеге асырады. CRS IOS XR операциялық жүйесін қолданады, ол жоғары деңгейдегі тасымалдаушы класты маршрутизаторлар үшін жасалған және CRS 1 құрылғысымен бірге қолға алынды. Көп шассилі орналастыруда желілік карта шассиі Fabric Card Chassis (FCC) деп аталатын басқа шасси түрлерімен бірге қолданылады. Архитектура желілік карта шассиі және/немесе мата карта шассиі санын арттыру арқылы кеңейтуге мүмкіндік береді. Бір және көп шассилі конфигурацияларда CRS коммутациялық маталары үш сатылы Beneš архитектурасына негізделген. Бір шассилі жүйеде үш ауысу сатысы – S1, S2 және S3 – барлығы бір мата картасында орналасқан. Көп шассилі жүйеде S2 сатысы мата карта шассиінде, ал S1 және S3 сатылары желілік карта шассиінде орналасқан. CRS желілік карта шассиі үш түрлі нұсқада келеді: 4 слотты, 8 слотты және 16 слотты. Слоттардың саны шассиге орналастырылатын желілік карталардың санын көрсетеді. Мата карта шассиінің тек бір түрі бар.
A standalone Carrier Routing System is deployed with a Line card chassis (LCC). The three main functional units of this LCC are the Line cards, Switching fabric and Route processor. The Line card consists of the physical interface card and a modular services card. The physical connectivity could be using fiber optic cables or using Twisted pair cables. The routing decisions are made by the route processor and the switching fabric takes care of the routing based on the Route processor input. The CRS runs IOS XR which is said to be designed for high end carrier grade routers and was launched with CRS 1. In a multi chassis deployment, the Line card chassis is used along with another variety of chassis called as the Fabric Card Chassis (FCC). The architecture enables scalability by increasing the number of Line Card Chassis and/or Fabric Card Chassis. In both single and multi chassis configurations, the CRS switch fabrics are based on a three stage Beneš architecture. In a single chassis system, the three switching stages—S1, S2, and S3—are all contained on one fabric card. In a multi chassis system, the S2 stage is contained within the Fabric Card Chassis, with the S1 and S3 stages resident in the Line Card Chassis. The CRS Line card chassis comes in three different flavors: 4 slot, 8 slot and 16 slot. The number of slots indicates the number of line cards that the chassis can accommodate. There is only one variety of Fabric card chassis.
CRS-X
Cisco Systems компаниясы өзінің қазіргі CRS отбасысына жаңа өнім – Carrier Routing System X немесе CRS X (CRS Ten) қосылғанын жариялады, ол компания ұсынған алғашқы CRS моделіне (CRS 1) қарағанда 10 есе жылдам болады деп күтілуде. CRS X – 400 Гбит/с бір слоттық жүйе және бұрынғы буын жабдығымен (HW) кері үйлесімді. Шығарылған кезде CRS X отбасы физикалық интерфейс карталарының үш түрін ұсынады (40x10GE, 4x100GE және 2x100GE Flex 40), сонымен қатар жақсартылған матрицасы мен модульдік қызмет карталары да бар.
Cisco Systems has announced the addition of a new product to its existing CRS family, the Carrier Routing System X, or CRS X (C R S Ten), which is expected to be 10 times faster than the first CRS model (CRS 1) the company offered, back in 2004. CRS X is said to be a 400 Gbit/s per slot system and is backward compatible with the previous generation HW. At the time of launch, CRS X family has three different flavors of physical interface card (40x10GE, 4x100GE and 2x100GE Flex 40) apart from the improved fabric and modular service cards. Model Number of slots Aggregate switching capacity CRS X 16 Slot 16 12.8 Tbit/s CRS X 16 Slot: Back to Back 32 25.6 Tbit/s CRS X Multi Chassis Up to 1152 Up to 921.6 Tbit/s
Cisco states that the CRS X can be used in back to back & multi chassis deployments and that CRS 1, CRS 3 & CRS X can co exist in a multi chassis setup. The press release (reference) also claims that, the CRS X 400 GE Line Card with Cisco AnyPort Technology uses Cisco’s CMOS photonic CPAK to reduce power consumption, heat dissipation and increase 100 GE port densities by a factor of three compared to competitive solutions. The Universal Port concept adds the option of using a 100G port as 2 ports of 40G or 10 ports of 10G. 40G can again be used as 4 ports 10G. This product will go up against Juniper Networks’ T4000 and PTX core routing systems and perhaps Alcatel Lucent’s 7950 XRS.
Модель | Слоттар саны | Агрегаттық коммутациялық қуат
------- | -------- | --------
CRS X 16 Слот | 16 | 12.8 Тбит/с
CRS X 16 Слот: Тікелей қосылым | 32 | 25.6 Тбит/с
CRS X Көп шасси | 1152 дейін | 921.6 Тбит/с дейін
Cisco Systems has announced the addition of a new product to its existing CRS family, the Carrier Routing System X, or CRS X (C R S Ten), which is expected to be 10 times faster than the first CRS model (CRS 1) the company offered, back in 2004. CRS X is said to be a 400 Gbit/s per slot system and is backward compatible with the previous generation HW. At the time of launch, CRS X family has three different flavors of physical interface card (40x10GE, 4x100GE and 2x100GE Flex 40) apart from the improved fabric and modular service cards. Model Number of slots Aggregate switching capacity CRS X 16 Slot 16 12.8 Tbit/s CRS X 16 Slot: Back to Back 32 25.6 Tbit/s CRS X Multi Chassis Up to 1152 Up to 921.6 Tbit/s
Cisco states that the CRS X can be used in back to back & multi chassis deployments and that CRS 1, CRS 3 & CRS X can co exist in a multi chassis setup. The press release (reference) also claims that, the CRS X 400 GE Line Card with Cisco AnyPort Technology uses Cisco’s CMOS photonic CPAK to reduce power consumption, heat dissipation and increase 100 GE port densities by a factor of three compared to competitive solutions. The Universal Port concept adds the option of using a 100G port as 2 ports of 40G or 10 ports of 10G. 40G can again be used as 4 ports 10G. This product will go up against Juniper Networks’ T4000 and PTX core routing systems and perhaps Alcatel Lucent’s 7950 XRS.
Cisco компаниясы CRS X жүйесін тікелей қосылыммен және көп шассилі конфигурацияда қолдануға болатынын, ал CRS 1, CRS 3 және CRS X жүйелерін көп шассилі желіде бірге пайдалануға болатынын мәлімдейді. Баспасөз хабарламасында (анықтама) сондай-ақ, Cisco AnyPort технологиясымен жабдықталған CRS X 400 GE Line Card, энергия тұтынуды, жылуды таратуды азайту және бәсекелес шешімдермен салыстырғанда 100 GE порттарының тығыздығын үш есеге арттыру үшін Cisco CMOS фотоникалық CPAK-ты пайдаланады делінген. Универсалды порт тұжырымдамасы 100G портты 40G екі порты немесе 10G он порты ретінде пайдалануға мүмкіндік береді. 40G портты да 4 порт 10G ретінде пайдалануға болады. Бұл өнім Juniper Networks T4000 және PTX негізгі маршруттау жүйелерімен, сондай-ақ Alcatel Lucent 7950 XRS жүйесімен бәсекелеседі.
Cisco Systems has announced the addition of a new product to its existing CRS family, the Carrier Routing System X, or CRS X (C R S Ten), which is expected to be 10 times faster than the first CRS model (CRS 1) the company offered, back in 2004. CRS X is said to be a 400 Gbit/s per slot system and is backward compatible with the previous generation HW. At the time of launch, CRS X family has three different flavors of physical interface card (40x10GE, 4x100GE and 2x100GE Flex 40) apart from the improved fabric and modular service cards. Model Number of slots Aggregate switching capacity CRS X 16 Slot 16 12.8 Tbit/s CRS X 16 Slot: Back to Back 32 25.6 Tbit/s CRS X Multi Chassis Up to 1152 Up to 921.6 Tbit/s
Cisco states that the CRS X can be used in back to back & multi chassis deployments and that CRS 1, CRS 3 & CRS X can co exist in a multi chassis setup. The press release (reference) also claims that, the CRS X 400 GE Line Card with Cisco AnyPort Technology uses Cisco’s CMOS photonic CPAK to reduce power consumption, heat dissipation and increase 100 GE port densities by a factor of three compared to competitive solutions. The Universal Port concept adds the option of using a 100G port as 2 ports of 40G or 10 ports of 10G. 40G can again be used as 4 ports 10G. This product will go up against Juniper Networks’ T4000 and PTX core routing systems and perhaps Alcatel Lucent’s 7950 XRS.
CRS-3
CRS 3 – 2010 жылғы наурызда іске қосылған CRS сериясының екінші буыны. CRS 3-те әр желілік карта ұясының сыйымдылығы 140 Гбит/с, бұл алдыңғы CRS 1 буынының сыйымдылығынан үш еседен астам. Архитектурасы бұрынғы буынмен сақталған және аппараттық жабдық CRS 1 жүйесімен үйлесімді. CRS 3 бір шасси жүйесі және көп шасси жүйесімен қатар, тікелей қосылым конфигурациясын да қолдайды. Бұл конфигурацияда екі Line Card шассиі тікелей біріктіріледі және көп шасси конфигурациясындағыдай Fabric Card шассиі қатыспайды. Бұл конфигурация тек 8 және 16 ұялы шасси модельдері үшін қолданылады. CRS 3 сонымен қатар IPoDWDM-ді қолдайды. Бұл шешім желілік элементтерді азайтады, сонымен қатар проактивті қорғау және басқару жазықтығының өзара әрекеттесуі сияқты көп деңгейлі мүмкіндіктерді қолдайды, бұл пайдалану және капиталдық шығыстарды төмендетуге мүмкіндік береді. AT&T Corporation CRS 3-ті 100 Гбит Ethernet магистральдық желісін пайдалана отырып, тікелей желіде сынақтан өткізді, ал голландтық KPN Telecom телекоммуникациялық компаниясы CRS 3 платформасын өзінің жаңа NextGen IP магистральдық желісі үшін таңдады.
The CRS 3 is the second generation of the CRS series launched in March, 2010. In CRS 3 each line card slot has a capacity of 140 Gbits/s, which is more than three times the capacity of the previous CRS 1 generation. The architecture is retained as in the previous generation and hardware is compatible with the CRS 1 system. Apart from the single chassis system and the multi chassis system, CRS 3 supports back to back configuration as well. In this configuration, two Line Card Chassis are connected back to back and there is no Fabric Card Chassis involved as in the case of a multi chassis configuration. This configuration works only for the 8 slot and 16 slot chassis models. CRS 3 also supports IPoDWDM. This solution reduces transport elements, while supporting multilayer features such as proactive protection and control plane interaction, reducing operating expenses and capital costs. AT&T Corporation tested the CRS 3 in a live network using the 100 Gb Ethernet backbone and the Dutch telco KPN Telecom selected the CRS 3 platform for their new NextGen IP backbone. Model Number of slots Max. Full Duplex throughput per system Link to product specs CRS 3 4 slotsingle shelf 4 1.12 Tbit/s Cisco CRS 3 4 Slot Single Shelf System CRS 3 8 slotsingle shelf 8 2.24 Tbit/s Cisco CRS 3 8 Slot Single Shelf System CRS 3 16 slotsingle shelf 16 4.48 Tbit/s Cisco CRS 3 16 Slot Single Shelf System CRS 3 multishelf platform 1152 322 Tbit/s Cisco CRS 3 24 Slot Fabric Card Chassis
Модель | Ұя саны | Жүйе бойынша максималды екі жақты өткізу қабілеті | Өнімнің сипаттамаларына сілтеме
------- | -------- | -------- | --------
CRS 3 4 ұялы сөре | 4 | 1.12 Тбит/с | Cisco CRS 3 4 Ұялы Сөре Жүйесі
CRS 3 8 ұялы сөре | 8 | 2.24 Тбит/с | Cisco CRS 3 8 Ұялы Сөре Жүйесі
CRS 3 16 ұялы сөре | 16 | 4.48 Тбит/с | Cisco CRS 3 16 Ұялы Сөре Жүйесі
CRS 3 көп сөрелі платформа | 1152 | 322 Тбит/с | Cisco CRS 3 24 Ұялы Fabric Card Шассисі
The CRS 3 is the second generation of the CRS series launched in March, 2010. In CRS 3 each line card slot has a capacity of 140 Gbits/s, which is more than three times the capacity of the previous CRS 1 generation. The architecture is retained as in the previous generation and hardware is compatible with the CRS 1 system. Apart from the single chassis system and the multi chassis system, CRS 3 supports back to back configuration as well. In this configuration, two Line Card Chassis are connected back to back and there is no Fabric Card Chassis involved as in the case of a multi chassis configuration. This configuration works only for the 8 slot and 16 slot chassis models. CRS 3 also supports IPoDWDM. This solution reduces transport elements, while supporting multilayer features such as proactive protection and control plane interaction, reducing operating expenses and capital costs. AT&T Corporation tested the CRS 3 in a live network using the 100 Gb Ethernet backbone and the Dutch telco KPN Telecom selected the CRS 3 platform for their new NextGen IP backbone. Model Number of slots Max. Full Duplex throughput per system Link to product specs CRS 3 4 slotsingle shelf 4 1.12 Tbit/s Cisco CRS 3 4 Slot Single Shelf System CRS 3 8 slotsingle shelf 8 2.24 Tbit/s Cisco CRS 3 8 Slot Single Shelf System CRS 3 16 slotsingle shelf 16 4.48 Tbit/s Cisco CRS 3 16 Slot Single Shelf System CRS 3 multishelf platform 1152 322 Tbit/s Cisco CRS 3 24 Slot Fabric Card Chassis
CRS-1
CRS 1 – 2004 жылы ұсынылған Carrier Routing System жүйесінің бірінші буыны. Бұл бұрын негізгі маршрутизаторлар ретінде қолданылған Cisco 12000 маршрутизаторларын алмастырды. CRS 1-нің әрбір слоты 40 Гбит/с сыйымдылыққа ие. CRS 1 жеке және көп шассилі конфигурацияларды қолдайды.
CRS 1 is the first generation of Carrier Routing System launched in 2004. This replaced the Cisco 12000 routers which were used as core routers. Each slot of CRS 1 has a capacity of 40 Gbit/s. CRS 1 supports both standalone and multi chassis configurations. Model Number of slots Max. Full Duplex throughput per system Link to product specs CRS 1 4 slotsingle shelf 4 320 Gbit/s Introducing the 4 slots CRS 1 Interactive presentation CRS 1:4 CRS 1 8 slotsingle shelf 8 640 Gbit/s Introducing the 8 slots CRS 1Cisco CRS 1 8 Slot Single Shelf System CRS 1 16 slotsingle shelf 16 1.2 Tbit/s Presentation of 16 slots CRS 1Cisco CRS 1 16 Slot Single Shelf System CRS 1 multishelf platform 1152 92 Tbit/s General brochure for the CRS 1 seriesCisco CRS 1 24 Slot Fabric Card Chassis
Модель | Слоты саны | Жүйе бойынша максималды толық дуплекс өткізу қабілеті | Өнімнің сипаттамаларына сілтеме
------- | -------- | -------- | --------
CRS 1 4 слот, бір сөре | 4 | 320 Гбит/с | 4 слот CRS 1 туралы ақпараттық презентация CRS 1:4
CRS 1 8 слот, бір сөре | 8 | 640 Гбит/с | 8 слот CRS 1 туралы ақпараттық презентация Cisco CRS 1 8 слоттық бір сөрелі жүйе
CRS 1 16 слот, бір сөре | 16 | 1.2 Тбит/с | 16 слот CRS 1 туралы презентация Cisco CRS 1 16 слоттық бір сөрелі жүйе
CRS 1 көп сөрелі платформа | 1152 | 92 Тбит/с | CRS 1 сериясының жалпы брошюрасы Cisco CRS 1 24 слоттық маталық карта шассисі
CRS 1 is the first generation of Carrier Routing System launched in 2004. This replaced the Cisco 12000 routers which were used as core routers. Each slot of CRS 1 has a capacity of 40 Gbit/s. CRS 1 supports both standalone and multi chassis configurations. Model Number of slots Max. Full Duplex throughput per system Link to product specs CRS 1 4 slotsingle shelf 4 320 Gbit/s Introducing the 4 slots CRS 1 Interactive presentation CRS 1:4 CRS 1 8 slotsingle shelf 8 640 Gbit/s Introducing the 8 slots CRS 1Cisco CRS 1 8 Slot Single Shelf System CRS 1 16 slotsingle shelf 16 1.2 Tbit/s Presentation of 16 slots CRS 1Cisco CRS 1 16 Slot Single Shelf System CRS 1 multishelf platform 1152 92 Tbit/s General brochure for the CRS 1 seriesCisco CRS 1 24 Slot Fabric Card Chassis