Система маршрутизации операторского класса Cisco CRS: Архитектура и возможности.
Carrier Routing System
Cisco CRS: высокопроизводительные маршрутизаторы для сетей нового поколения (NGN). Поддержка скоростей до 322 Тбит/с, Ethernet и SONET. Для провайдеров и предприятий.
Сравнивайте с английским: нажмите на абзац — оригинал откроется в окне. Кнопка EN под абзацем показывает его прямо в тексте.
Содержание
Введение
Carrier Routing System (CRS) — это модульный и распределенный магистральный маршрутизатор, разработанный компанией Cisco Systems Inc., который позволяет операторам связи предоставлять услуги передачи данных, голоса и видео через масштабируемую IP-инфраструктуру сети нового поколения (NGN). В топологии сети эти маршрутизаторы обычно располагаются в ядре или на границе сети оператора связи. Они также используются поставщиками контента и крупными предприятиями. Система поддерживает широкий спектр скоростей и типов интерфейсов, включая канальные OC3, OC12 до OC768 при использовании Packet over SONET и от 1GE, 10GE до 100GE на базе технологий Ethernet. Отдельно стоящая система CRS 3 способна обрабатывать 2,2 Тбит/с, а многошассиевая система может быть спроектирована для обработки 322 Тбит/с.
Carrier Routing System (CRS) is a modular and distributed core router developed by Cisco Systems Inc that enables service providers to deliver data, voice, and video services over a scalable IP Next Generation Network (NGN) infrastructure. In a network topology, these routers are generally positioned in the core or edge of a service provider network. They are also used by Over the top content providers and large enterprises. It supports a wide range of interface speeds and types such as channelized OC3, OC12 to OC768 on Packet over SONET and from 1GE, 10GE all the way to 100GE on the Ethernet technologies. A standalone CRS 3 system can handle 2.2 Tbit/s and a multi chassis system could be designed to handle 322 Tbit/s.
Архитектура
Автономная система маршрутизации оператора связи развернута с шасси линейных карт (LCC). Три основных функциональных блока этого LCC – это линейные карты, коммутационная матрица и маршрутизатор. Линейная карта состоит из карты физического интерфейса и модульной карты сервисов. Физическое подключение может осуществляться с использованием оптоволоконных кабелей или кабелей витой пары. Решения о маршрутизации принимаются маршрутизатором, а коммутационная матрица обеспечивает маршрутизацию на основе входных данных от маршрутизатора. CRS работает на IOS XR, которая разработана для высокопроизводительных маршрутизаторов операторского класса и была представлена вместе с CRS 1. При многошассисной конфигурации шасси линейных карт используется совместно с другим типом шасси, называемым шасси карт коммутационной матрицы (FCC). Архитектура обеспечивает масштабируемость за счет увеличения количества шасси линейных карт и/или шасси карт коммутационной матрицы. Как в одношассисных, так и в многошассисных конфигурациях коммутационные матрицы CRS основаны на трехступенчатой архитектуре Beneš. В системе с одним шасси все три ступени коммутации – S1, S2 и S3 – находятся на одной карте коммутационной матрицы. В многошассисной системе ступень S2 находится в шасси карт коммутационной матрицы, а ступени S1 и S3 – в шасси линейных карт. Шасси линейных карт CRS выпускается в трех вариантах: на 4, 8 и 16 слотов. Количество слотов указывает на количество линейных карт, которые может вместить шасси. Существует только один тип шасси карт коммутационной матрицы.
A standalone Carrier Routing System is deployed with a Line card chassis (LCC). The three main functional units of this LCC are the Line cards, Switching fabric and Route processor. The Line card consists of the physical interface card and a modular services card. The physical connectivity could be using fiber optic cables or using Twisted pair cables. The routing decisions are made by the route processor and the switching fabric takes care of the routing based on the Route processor input. The CRS runs IOS XR which is said to be designed for high end carrier grade routers and was launched with CRS 1. In a multi chassis deployment, the Line card chassis is used along with another variety of chassis called as the Fabric Card Chassis (FCC). The architecture enables scalability by increasing the number of Line Card Chassis and/or Fabric Card Chassis. In both single and multi chassis configurations, the CRS switch fabrics are based on a three stage Beneš architecture. In a single chassis system, the three switching stages—S1, S2, and S3—are all contained on one fabric card. In a multi chassis system, the S2 stage is contained within the Fabric Card Chassis, with the S1 and S3 stages resident in the Line Card Chassis. The CRS Line card chassis comes in three different flavors: 4 slot, 8 slot and 16 slot. The number of slots indicates the number of line cards that the chassis can accommodate. There is only one variety of Fabric card chassis.
CRS-X
Cisco Systems объявила о добавлении нового продукта в существующую линейку CRS – Carrier Routing System X, или CRS X (CRS Ten), который, как ожидается, будет в 10 раз быстрее первой модели CRS (CRS 1), представленной компанией в 2004 году. CRS X заявлена как система с пропускной способностью 400 Гбит/с на слот и обратно совместима с аппаратным обеспечением предыдущего поколения. На момент запуска семейство CRS X включает три различных типа физических интерфейсных карт (40x10GE, 4x100GE и 2x100GE Flex 40), а также улучшенные коммутационные и модульные сервисные карты.
Cisco Systems has announced the addition of a new product to its existing CRS family, the Carrier Routing System X, or CRS X (C R S Ten), which is expected to be 10 times faster than the first CRS model (CRS 1) the company offered, back in 2004. CRS X is said to be a 400 Gbit/s per slot system and is backward compatible with the previous generation HW. At the time of launch, CRS X family has three different flavors of physical interface card (40x10GE, 4x100GE and 2x100GE Flex 40) apart from the improved fabric and modular service cards. Model Number of slots Aggregate switching capacity CRS X 16 Slot 16 12.8 Tbit/s CRS X 16 Slot: Back to Back 32 25.6 Tbit/s CRS X Multi Chassis Up to 1152 Up to 921.6 Tbit/s
Cisco states that the CRS X can be used in back to back & multi chassis deployments and that CRS 1, CRS 3 & CRS X can co exist in a multi chassis setup. The press release (reference) also claims that, the CRS X 400 GE Line Card with Cisco AnyPort Technology uses Cisco’s CMOS photonic CPAK to reduce power consumption, heat dissipation and increase 100 GE port densities by a factor of three compared to competitive solutions. The Universal Port concept adds the option of using a 100G port as 2 ports of 40G or 10 ports of 10G. 40G can again be used as 4 ports 10G. This product will go up against Juniper Networks’ T4000 and PTX core routing systems and perhaps Alcatel Lucent’s 7950 XRS.
Модель | Количество слотов | Общая пропускная способность
------- | -------- | --------
CRS X 16 Slot | 16 | 12,8 Тбит/с
CRS X 16 Slot: Back to Back | 32 | 25,6 Тбит/с
CRS X Multi Chassis | До 1152 | До 921,6 Тбит/с
Cisco Systems has announced the addition of a new product to its existing CRS family, the Carrier Routing System X, or CRS X (C R S Ten), which is expected to be 10 times faster than the first CRS model (CRS 1) the company offered, back in 2004. CRS X is said to be a 400 Gbit/s per slot system and is backward compatible with the previous generation HW. At the time of launch, CRS X family has three different flavors of physical interface card (40x10GE, 4x100GE and 2x100GE Flex 40) apart from the improved fabric and modular service cards. Model Number of slots Aggregate switching capacity CRS X 16 Slot 16 12.8 Tbit/s CRS X 16 Slot: Back to Back 32 25.6 Tbit/s CRS X Multi Chassis Up to 1152 Up to 921.6 Tbit/s
Cisco states that the CRS X can be used in back to back & multi chassis deployments and that CRS 1, CRS 3 & CRS X can co exist in a multi chassis setup. The press release (reference) also claims that, the CRS X 400 GE Line Card with Cisco AnyPort Technology uses Cisco’s CMOS photonic CPAK to reduce power consumption, heat dissipation and increase 100 GE port densities by a factor of three compared to competitive solutions. The Universal Port concept adds the option of using a 100G port as 2 ports of 40G or 10 ports of 10G. 40G can again be used as 4 ports 10G. This product will go up against Juniper Networks’ T4000 and PTX core routing systems and perhaps Alcatel Lucent’s 7950 XRS.
Cisco сообщает, что CRS X может использоваться в конфигурациях back-to-back и с несколькими шасси, а также что CRS 1, CRS 3 и CRS X могут работать совместно в многошассисной среде. В пресс-релизе (ссылка) также утверждается, что линейная карта CRS X 400 GE с технологией Cisco AnyPort использует CMOS-фотонику CPAK от Cisco для снижения энергопотребления, тепловыделения и увеличения плотности портов 100 GE в три раза по сравнению с конкурирующими решениями. Концепция универсального порта позволяет использовать порт 100G как два порта 40G или десять портов 10G. Порт 40G, в свою очередь, можно разделить на четыре порта 10G. Этот продукт будет конкурировать с основными маршрутизаторами Juniper Networks T4000 и PTX, а также, возможно, с Alcatel Lucent 7950 XRS.
Cisco Systems has announced the addition of a new product to its existing CRS family, the Carrier Routing System X, or CRS X (C R S Ten), which is expected to be 10 times faster than the first CRS model (CRS 1) the company offered, back in 2004. CRS X is said to be a 400 Gbit/s per slot system and is backward compatible with the previous generation HW. At the time of launch, CRS X family has three different flavors of physical interface card (40x10GE, 4x100GE and 2x100GE Flex 40) apart from the improved fabric and modular service cards. Model Number of slots Aggregate switching capacity CRS X 16 Slot 16 12.8 Tbit/s CRS X 16 Slot: Back to Back 32 25.6 Tbit/s CRS X Multi Chassis Up to 1152 Up to 921.6 Tbit/s
Cisco states that the CRS X can be used in back to back & multi chassis deployments and that CRS 1, CRS 3 & CRS X can co exist in a multi chassis setup. The press release (reference) also claims that, the CRS X 400 GE Line Card with Cisco AnyPort Technology uses Cisco’s CMOS photonic CPAK to reduce power consumption, heat dissipation and increase 100 GE port densities by a factor of three compared to competitive solutions. The Universal Port concept adds the option of using a 100G port as 2 ports of 40G or 10 ports of 10G. 40G can again be used as 4 ports 10G. This product will go up against Juniper Networks’ T4000 and PTX core routing systems and perhaps Alcatel Lucent’s 7950 XRS.
CRS-3
CRS 3 – второе поколение серии CRS, представленное в марте 2010 года. В CRS 3 каждый слот для линейных карт имеет пропускную способность 140 Гбит/с, что более чем в три раза превышает пропускную способность предыдущего поколения CRS 1. Архитектура сохранена как в предыдущем поколении, а аппаратное обеспечение совместимо с системой CRS 1. Помимо системы с одним шасси и многошасси, CRS 3 также поддерживает конфигурацию «back-to-back». В этой конфигурации два шасси с линейными картами соединяются непосредственно друг с другом, без использования шасси с коммутационными картами, как в случае многошасси-конфигурации. Эта конфигурация доступна только для моделей шасси с 8 и 16 слотами. CRS 3 также поддерживает IPoDWDM. Это решение позволяет сократить количество транспортных элементов, обеспечивая при этом многоуровневые функции, такие как проактивная защита и взаимодействие с плоскостью управления, что снижает операционные и капитальные затраты. Корпорация AT&T протестировала CRS 3 в действующей сети с использованием магистрали 100 Гбит Ethernet, а голландский оператор связи KPN Telecom выбрал платформу CRS 3 для своей новой IP-магистрали NextGen.
The CRS 3 is the second generation of the CRS series launched in March, 2010. In CRS 3 each line card slot has a capacity of 140 Gbits/s, which is more than three times the capacity of the previous CRS 1 generation. The architecture is retained as in the previous generation and hardware is compatible with the CRS 1 system. Apart from the single chassis system and the multi chassis system, CRS 3 supports back to back configuration as well. In this configuration, two Line Card Chassis are connected back to back and there is no Fabric Card Chassis involved as in the case of a multi chassis configuration. This configuration works only for the 8 slot and 16 slot chassis models. CRS 3 also supports IPoDWDM. This solution reduces transport elements, while supporting multilayer features such as proactive protection and control plane interaction, reducing operating expenses and capital costs. AT&T Corporation tested the CRS 3 in a live network using the 100 Gb Ethernet backbone and the Dutch telco KPN Telecom selected the CRS 3 platform for their new NextGen IP backbone. Model Number of slots Max. Full Duplex throughput per system Link to product specs CRS 3 4 slotsingle shelf 4 1.12 Tbit/s Cisco CRS 3 4 Slot Single Shelf System CRS 3 8 slotsingle shelf 8 2.24 Tbit/s Cisco CRS 3 8 Slot Single Shelf System CRS 3 16 slotsingle shelf 16 4.48 Tbit/s Cisco CRS 3 16 Slot Single Shelf System CRS 3 multishelf platform 1152 322 Tbit/s Cisco CRS 3 24 Slot Fabric Card Chassis
| Модель | Количество слотов | Максимальная пропускная способность системы в режиме полной дуплексной связи | Ссылка на спецификации продукта |
|---|---|---|---|
| CRS 3 4 слота, одношасси | 4 | 1.12 Тбит/с | Cisco CRS 3 4 Слот Одношасси Система |
| CRS 3 8 слота, одношасси | 8 | 2.24 Тбит/с | Cisco CRS 3 8 Слот Одношасси Система |
| CRS 3 16 слота, одношасси | 16 | 4.48 Тбит/с | Cisco CRS 3 16 Слот Одношасси Система |
| CRS 3 многошасси платформа | 1152 | 322 Тбит/с | Cisco CRS 3 24 Слот Шасси с коммутационными картами |
The CRS 3 is the second generation of the CRS series launched in March, 2010. In CRS 3 each line card slot has a capacity of 140 Gbits/s, which is more than three times the capacity of the previous CRS 1 generation. The architecture is retained as in the previous generation and hardware is compatible with the CRS 1 system. Apart from the single chassis system and the multi chassis system, CRS 3 supports back to back configuration as well. In this configuration, two Line Card Chassis are connected back to back and there is no Fabric Card Chassis involved as in the case of a multi chassis configuration. This configuration works only for the 8 slot and 16 slot chassis models. CRS 3 also supports IPoDWDM. This solution reduces transport elements, while supporting multilayer features such as proactive protection and control plane interaction, reducing operating expenses and capital costs. AT&T Corporation tested the CRS 3 in a live network using the 100 Gb Ethernet backbone and the Dutch telco KPN Telecom selected the CRS 3 platform for their new NextGen IP backbone. Model Number of slots Max. Full Duplex throughput per system Link to product specs CRS 3 4 slotsingle shelf 4 1.12 Tbit/s Cisco CRS 3 4 Slot Single Shelf System CRS 3 8 slotsingle shelf 8 2.24 Tbit/s Cisco CRS 3 8 Slot Single Shelf System CRS 3 16 slotsingle shelf 16 4.48 Tbit/s Cisco CRS 3 16 Slot Single Shelf System CRS 3 multishelf platform 1152 322 Tbit/s Cisco CRS 3 24 Slot Fabric Card Chassis
CRS-1
CRS 1 – это первое поколение системы маршрутизации Carrier Routing System, представленное в 2004 году. Она пришла на смену маршрутизаторам Cisco 12000, которые использовались в качестве ядра сети. Каждый слот CRS 1 имеет пропускную способность 40 Гбит/с. CRS 1 поддерживает как автономные, так и многошассиальные конфигурации.
CRS 1 is the first generation of Carrier Routing System launched in 2004. This replaced the Cisco 12000 routers which were used as core routers. Each slot of CRS 1 has a capacity of 40 Gbit/s. CRS 1 supports both standalone and multi chassis configurations. Model Number of slots Max. Full Duplex throughput per system Link to product specs CRS 1 4 slotsingle shelf 4 320 Gbit/s Introducing the 4 slots CRS 1 Interactive presentation CRS 1:4 CRS 1 8 slotsingle shelf 8 640 Gbit/s Introducing the 8 slots CRS 1Cisco CRS 1 8 Slot Single Shelf System CRS 1 16 slotsingle shelf 16 1.2 Tbit/s Presentation of 16 slots CRS 1Cisco CRS 1 16 Slot Single Shelf System CRS 1 multishelf platform 1152 92 Tbit/s General brochure for the CRS 1 seriesCisco CRS 1 24 Slot Fabric Card Chassis
Модель | Количество слотов | Максимальная пропускная способность системы в полнодуплексном режиме | Ссылка на спецификации продукта
------- | -------- | -------- | --------
CRS 1 4 слота, единая полка | 4 | 320 Гбит/с | Ознакомьтесь с 4-слотовой CRS 1. Интерактивная презентация CRS 1:4
CRS 1 8 слотов, единая полка | 8 | 640 Гбит/с | Ознакомьтесь с 8-слотовой CRS 1. Cisco CRS 1 8-слотовая система, единая полка
CRS 1 16 слотов, единая полка | 16 | 1.2 Тбит/с | Презентация 16-слотовой CRS 1. Cisco CRS 1 16-слотовая система, единая полка
CRS 1 многополкальная платформа | 1152 | 92 Тбит/с | Общая брошюра для серии CRS 1. Cisco CRS 1 24-слотовое шасси с картами Fabric.
CRS 1 is the first generation of Carrier Routing System launched in 2004. This replaced the Cisco 12000 routers which were used as core routers. Each slot of CRS 1 has a capacity of 40 Gbit/s. CRS 1 supports both standalone and multi chassis configurations. Model Number of slots Max. Full Duplex throughput per system Link to product specs CRS 1 4 slotsingle shelf 4 320 Gbit/s Introducing the 4 slots CRS 1 Interactive presentation CRS 1:4 CRS 1 8 slotsingle shelf 8 640 Gbit/s Introducing the 8 slots CRS 1Cisco CRS 1 8 Slot Single Shelf System CRS 1 16 slotsingle shelf 16 1.2 Tbit/s Presentation of 16 slots CRS 1Cisco CRS 1 16 Slot Single Shelf System CRS 1 multishelf platform 1152 92 Tbit/s General brochure for the CRS 1 seriesCisco CRS 1 24 Slot Fabric Card Chassis