Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Кіріспе
GK Вена-Оңтүстік – Австрия және Венгрияның электр жүйелерін тікелей тоқпен байланыстырған екі тізбекті HVDC станциясы болды. Ол 1993 жылдың маусымынан 1996 жылдың қазанына дейін жұмыс істеді.
The GK Vienna–Southeast was a back to back HVDC station linking the electric power grids of Austria and Hungary. It operated between June 1993 and October 1996.
Құрылыс
Бұл қондырғы Siemens компаниясымен салынды және максималды қуат беруі 600 МВт, жұмыс кернеуі 142 кВ құрады. Ол негізінен Бавария және Чехияның электр желілерін біріктіру үшін пайдаланылған, сол уақытта салынған Эценрихттегі HVDC back-to-back станциясымен ұқсас болды. Осы орналымдағыдай, инверторлар 864 тиристорды қолданды. Дегенмен, GK Vienna Southeast-та Эценрихттегі HVDC back-to-back станциясындағы алты бірфазалық трансформатордың орнына төрт үшфазалық трансформатор қолданылды. 1995 жылы Батыс және Шығыс Еуропаның электр желілері синхрондалғаннан кейін Эценрихттегі қондырғы қолданудан шығып қалса, GK Vienna Southeast бастапқыда жұмыс істеді, себебі Австрия мен Венгрияның электр желілерін тікелей байланыстыру Австриядағы 380 кВ ұлттық желісінің болмауына байланысты реттеуде техникалық қиындықтар тудырар еді. Бұл мәселелер 1996 жылы Польшаның оңтүстігіндегі көмірмен жұмыс істейтін электр станцияларына жиілікті реттеу жабдықтарын орнату арқылы шешілді, сондықтан GK Vienna Southeast 1996 жылдың қазан айында қажетсіз болып, тоқтатылды. GK Vienna Southeast тоқтатылуы Vienna southeast – Győr 380 кВ желісінің максималды қуат беруін 1514 МВт-қа дейін арттырды. Тоқтатылғаннан кейін GK Vienna Southeast-ты демонтаждау және оны Шығыс Еуропада ТМД елдерімен шекараға жақын жерде қайта құру жоспарланды, бұл Орталық Еуропа мен ТМД елдерінің электр желілерін байланыстыру мақсатында болды. Алайда, бұл жоспар іске аспады, сондықтан орналым 2007–2008 жылдары демонтаждалды. Бірақ, гармониялық толқындарды сүзгіштердің бірі ескерткіш ретінде сақталды. Осы орында Австрияның электр желісінің басқару орталығына арналған жаңа ғимарат салынды. Статикалық инвертор залы бұзылмады, бірақ шеберханаға айналдырылды. GK Wien–Southeast аумағынан оңтүстікке қарай 260 метр жерде орналасқан үшінші (GK Wien–Southeast екіншісінен бұрын) тіректе 26 шақырымдық желі бөлігі басталады, онда ол Stixneusiedl қосалқы станциясына дейінгі екі 380 кВ желісімен бірге сол тіректе орнатылған. Stixneusiedl қосалқы станциясы желіден шамамен 50 метр оңтүстікке қарай өтеді. Тағы 37,5 шақырымнан кейін желі Венгрия шекарасын кесіп өтеді. 2010 жылдың басында желінің екінші 380 В контуры орнатылды, оған бүкіл желінің тіректері арналған. Бұл контур Оттевенге жақын жерде оңтүстік-батысқа қарай Шомбатхели қосалқы станциясына қарай бұрылады.
This facility was built by Siemens and had a maximum transfer power of 600 MW with an operation voltage of 142 kV. In great extent, it was identical with the HVDC back to back station in Etzenricht, which was used for coupling the power grids of Bavaria and Czech and built at the same time. As in this installation, the inverters used 864 thyristors. However, at GK Vienna Southeast were not used as in the HVDC back to back station in Etzenricht six single phase transformers, but four three phase transformers. While the facility in Etzenricht got obsolete in 1995 after synchronisation of power grids in Western and Eastern Europe, GK Vienna Southeast remained in service at first, because the direct interconnection of power grids of Austria and Hungary would have caused regulation technical problems as result of the missing national 380 kV grid in Austria. These problems were solved in 1996 with the installation of frequency regulation equipment in coal fired power stations in Southern Poland, so GK Vienna Southeast GK got unessential in October 1996 and was shut down. The shut down of GK Vienna Southeast increased the maximum transfer power of the 380 kV line Vienna southeast – Győr to 1514 MW. After its shut down, it was planned to dismantle GK Vienna Southeast and rebuild it in East Europe at a location close to the border to the CIS countries for the realization of an interconnection between the power grid of central Europe and the CIS countries. However, that was not done and so the installation was dismantled in 2007–08. However, one of the harmonic waves filter was preserved as a monument. On the site, a new building for the control centre of the power grid of Austria was built. The static inverter hall was not demolished, but turned into a workshop. At the third (before decommissioning of GK Wien–Southeast second) pylon, which is situated 260 metres south of the area of GK Wien–Southeast, the 26 kilometre long line section starts, where it is together with the two 380 kV circuits of the powerline to Stixneusiedl substation installed on the same pylons. Stixneusiedl substation is passed by the line approximately 50 metres southwards. After a further 37.5 kilometres, the line passes the border to Hungary. At the beginning of 2010, the second 380 V circuit of the line was installed, for which the pylons of the whole line are already designed. This circuit branches near Ötteveny in direction southwest toward Szombathely substation.