Ағаштан газ өндіру қондырғысы

Device that converts timber or charcoal into wood gas suitable for an internal combustion engine

A wood gas generator is a gasification unit which converts timber or charcoal into wood gas, a producer gas consisting of atmospheric nitrogen, carbon monoxide, hydrogen, traces of methane, and other gases, which – after cooling and filtering – can then be used to power an internal combustion engine or for other purposes. Historically wood gas generators were often mounted on vehicles, but present studies and developments concentrate mostly on stationary plants.

Gasification was an important and common technology during the 19th and early 20th century. Town gas produced from coal was widely used, mainly for lighting purposes. When stationary internal combustion engines based on the Otto cycle became available in the 1870s, they began displacing steam engines as prime movers in many works requiring stationary motive power. Adoption accelerated after the Otto engine's patent expired in 1886. The potential and practical applicability of gasification to internal combustion engines were well understood from the earliest days of their development. In 1873, Thaddeus S. C. Lowe developed and patented the water gas process by which large amounts of hydrogen gas could be generated for residential and commercial use in heating and lighting. Unlike the common coal gas, or coke gas which was used in municipal service, this gas provided a more efficient heating fuel. During the late 19th century internal combustion engines were commonly fueled by town gas, and during the early 20th century many stationary engines switched to using producer gas created from coke which was substantially cheaper than town gas which was based on the distillation (pyrolysis) of more expensive coal. During World War II, gasoline was rationed and in short supply. Due to the lack of gasoline from petroleum, older people recalled how to build gasifiers for both wood and coal, and how to convert internal combustion engines to run on gaseous fuel, and wood gas generators were in active production. In Great Britain, France, the United States and Germany, large numbers of such generators were constructed or improvised to convert wood and coal into fuel for vehicles. Commercial generators were in production before and after the war for use in special circumstances or in distressed economies. Some World War II era wood gas generators were of the "Imbert" downdraft type, designed around 1920 by French inventor Georges Imbert. Germany produced Gazogene units for vehicles including cars, trucks, artillery tractors and even tanks, to preserve the limited supplies of fuel. Even in non combatant countries, such as Sweden, Brazil or Spain, gasogene was popular, as oil became hard to obtain. In Brazil, a racer named Chico Landi won at São Paulo's Interlagos circuit in 1944, driving a wood gas powered Alfa Romeo. Coal based town gas production was generally displaced by petroleum based gas and natural gas. However, Great Britain continued her use of coal based town gas until the North Sea natural gas discoveries in the 1960s and 1970s.

When oil prices rose there was renewed interest in wood gas generators. The US Federal Emergency Management Agency (FEMA) published a book in March 1989 describing how to build a gas generator in an emergency when oil was not available. It described a design called the "stratified downdraft gasifier" which solves several drawbacks of earlier types. The European Union sponsored a wood gas project in Güssing, Austria, starting in 2005. This project was an electric power plant with a wood gas generator and a gas engine to convert the wood gas into 2 MW electric power and 4.5 MW heat. There was also an experimental device to use the Fischer–Tropsch process to convert wood gas to a diesel like fuel. By October 2005, it was possible to convert 5 kg of wood into 1 litre of fuel. The Democratic People's Republic of Korea (North Korea) is also known to have trucks that run off of wood gas generators. The trucks are common outside of Pyongyang and are in rural villages and smaller towns. These trucks are utilized due to sanctions placed on North Korea regarding imports of oil and gas.

There is a rich literature on gas works, town gas, gas generation, wood gas, and producer gas, that is now in the public domain due to its age. Most successful wood gas generators in use in Europe and the United States are some variation of the earlier Imbert design. Wood gas generators often use wood; however, charcoal can also be used as a fuel. It is denser and produces a cleaner gas without the tarry volatiles and excessive water content of wood. The FEMA wood gas generator is (by definition of the FEMA manual) an emergency gasifier. It is designed to be rapidly assembled in a true fuel crisis. This simplified design has distinct benefits over the earlier European units such as easier refueling and construction but is less popular than the earlier Imbert design because of significant new problems, which include a lack of a fixed oxidization zone and allows the oxidization zone to creep to a larger area, causing a drop in temperature; a lower operating temperature leads to tar production and it lacks a true reduction zone further increasing this design's propensity to produce tar. Tar in the wood gas stream is considered a dirty gas and tar will gum up a motor quickly, possibly leading to stuck valves and rings. A new design known as the Keith gasifier improves on the FEMA unit, incorporating extensive heat recovery and eliminating the tar problem. Testing at Auburn University has shown it to be 37% more efficient than running gasoline. This system set the world speed record for biomass powered vehicles and has made several cross country tours. The United Nations produced the FOA 72 document with details about their wood gas generator design and construction, as does World Bank technical paper 296.

When not carefully designed and used, there exists considerable potential for injury or death due to wood gas containing a large percentage of poisonous carbon monoxide (CO) gas. Wood gasifiers of proven design and thoroughly tested construction are considered safe to use outdoors, or in a partially enclosed space, for example, under a shelter open to the air on two sides; they may also be considered relatively safe to use in an extremely well ventilated (e. g. negative pressure) indoor area not connected to any indoor area used for sleeping, equipped with redundant (more than 1), completely independent, battery powered, regularly tested carbon monoxide gas detectors. However, prudence must dictate that any sort of experimental wood gasifier design or new construction be thoroughly tested outdoors, and only outdoors, with a "buddy" at all times, and with constant vigilance for any sign of headache, drowsiness, or nausea, as these are the first symptoms of carbon monoxide poisoning. In addition, mixtures of excessive quantities of air and gas should be avoided as this could lead to the deflagration (explosion) of the gas in question if a combustion source is present. Long term storage of wood gas, except through the use of a gasholder type water displacement apparatus, should not be attempted, due to the volatile elements present in the gas, which, if allowed to excessively precipitate, will condense in the storage vessel. Under no circumstances should wood gas ever be compressed to more than above ambient, as this may induce condensation of volatiles, as well as lead to the likelihood of severe injury or death due to carbon monoxide or deflagration if the vessel leaks or fails.