Canon EF 50мм линзалары: түрлері мен ерекшеліктері

The EF 50mm lenses are a group of normal prime lenses made by Canon that share the same focal length. These lenses are based on the classic double Gauss lens, The 50mm focal length, when used with a 35mm film or full frame sensor, has been widely considered to match the perspective seen by the human eye. Canon 50mm lenses have an EF type mount that fits the Canon EOS line of cameras. When pairing a 50mm lens to a Canon DSLR with an APS C sized sensor, the crop factor effectively turns the 50mm focal length into an 80mm field of view. Seven EF 50mm lenses have been sold by Canon:
1.0L USM (discontinued, replaced by 1.2L USM)
1.2L USM
1.4 USM
1.8 (discontinued, replaced by 1.8 II)
1.8 II (discontinued, replaced by 1.8 STM)
1.8 STM
2.5 Compact Macro

The discontinued EF50mm 1.0L USM is a professional L series autofocus lens. On the used market sells for as much as double the original retail value. It was the fastest SLR lens in production during its lifetime. This, combined with the high production cost and low sales volume, led to it being discontinued in 2000 and eventually superseded by the 1.2 edition.

The EF50mm 1.2L USM is a professional L series lens designed to replace the EF50mm 1.0L USM. It is constructed with a metal body and mount, and plastic extremities. This lens features a wide rubber focusing ring that is damped, a distance window with infrared index, and is fully weather sealed, when a filter is added to the front. A circular, 8 blade diaphragm and maximum aperture of 1.2 give this lens the ability to create very shallow depth of field effects with smooth background blur. The optical construction of this lens contains 8 lens elements, including one ground and polished aspherical lens element. This lens uses a floating front extension focusing system, powered by a ring type USM motor. The front of the lens does not rotate or extend when focusing.

The EF50mm 1.4 USM is a consumer and professional level lens. It is the least expensive 1.4 aperture lens that Canon currently manufactures. It is constructed with a plastic body and a metal mount. This lens features a distance window with infrared index. An 8 blade diaphragm and maximum aperture of 1.4 give this lens the ability to create shallow depth of field effects. The optical construction of this lens contains 7 lens elements including 2 high refraction elements, but no aspherical, high dispersion or calcium fluoride elements. The lens uses a front extension focusing system, powered by a micro USM motor. Even though this lens uses a micro USM motor, it still has FTM (full time manual focus) available. Auto focus speed of this lens is fast, but not as quick as most ring USM based lenses. The front of the lens does not rotate, but extends by up to about one centimeter when focusing. While similar to ring USM lenses in terms of operation, the micro USM motor is very prone to damage from impacts. Owners of the lens are encouraged to store the lens with the barrel fully retreated into the housing (that is, set to focus at infinity) to avoid damaging the AF motor during storage or transport. For a similar reason, use of a lens hood is recommended when the lens is mounted on a camera.

The EF50mm 1.8 is an economy level lens (discontinued in 1990), which has been replaced by the EF50mm 1.8 II. The body is plastic while the lens mount is stainless steel, and it features a distance window with infrared index. A 5 blade maximum aperture of 1.8 gives this lens the ability to create depth of field effects. Note that this housing and use of a 5 blade aperture were shared with the EF28mm 2.8 and EF35mm 2 lenses, in the case of the latter to speed date of release and keep production costs low. The optical construction of this lens contains 6 lens elements, with no special elements. This lens uses a front extension focusing system, powered by an AFD motor. The front of the lens does not rotate when focusing, making it compatible with circular polarisers. Although auto focus speed, despite the AFD motor, is moderately fast but audible, the lens is still very popular. Because of its low price (it is sold used only) and very sharp optical quality, this lens has earned the preference of a lot of photographers. Obviously, when shooting at f/1.8, it offers a very shallow depth of field which is beneficial for isolating subjects against a blurred background (bokeh).

The EF50mm 1.8 II replaced the EF50mm 1.8 in 1991, until it was replaced by the EF50mm 1.8 STM version in 2015. The EF50mm 1.8 II lens has a plastic lens mount, as opposed to the metal one on the original EF50mm 1.8. The manual focusing ring from the original was replaced by a very small thin focusing ring on the front tip of the lens, and the distance scale and the IR focusing label were removed. However the lens does not suffer from rotating front lens element and can be used with polarizing filters. The optics for both lenses are identical, with 6 elements in 5 groups and a 5 blade diaphragm, and both lenses have a 52mm filter thread. Because of its low price and sharp optical quality, this lens earned the nicknames 'nifty fifty' and 'plastic fantastic'. When shooting at f/1.8, it offers a very shallow depth of field which is beneficial for isolating subjects against a blurred background (bokeh).

Canon introduced the EF50mm 1.8 STM on May 10, 2015. This lens utilizes Canon's STM (STepper Motor) focusing mechanism, which supports the Movie Servo autofocus mode. The lens features a metal mount and has a rounded seven blade aperture. Its filter diameter of 49mm is the smallest among all lenses in the family.

The EF50mm f/2.5 Compact Macro is a relatively inexpensive macro lens with a minimum focusing distance of 23 cm (9 inches) offering a maximum magnification of 0.5x actual size. The maximum 0.5x magnification means this lens is more suitable for photographing documents, products and objects at least 5 cm (2 inches) wide than small insects etc. The outer barrel is grooved to accept Canon's MR 14 ring flash which can be used as the principal light source for close ups or as on axis fill lighting for portraits. The six blade diaphragm provides reasonably good out of focus blur (bokeh) for portrait work. First introduced in 1987, it is the oldest lens in Canon's current lineup (as of 2014) that is still available new. The lens is constructed with a plastic body and metal mount, and features a distance window with infrared index and magnification markings. The optional Life Size Converter EF adapts the lens to produce a maximum magnification of 1:1. Attaching the converter increases the lens focal length to 70mm, reduces the maximum aperture to 3.5 and limits the focal range. Magnification markings for the converter are shown on the (extending) inner lens barrel.

Attribute 1.0L USM 1.2L USM 1.4 USM ImageKey features Full frame compatible  Yes Image stabilizer  No Ultrasonic Motor  Yes Stepping Motor  No L series  Yes  No Diffractive Optics  No Macro  NoTechnical data Aperture (max min) 1.0 16 1.2 16 1.4 22 Construction 9 groups / 11 elements 6 groups / 8 elements 6 groups / 7 elements # of diaphragm blades 8 Closest focusing distance 2 ft / 0.6m 1.5 ft / 0.45m Max. magnification0.11x 0.15x (1:6.6) Horizontal viewing angle 40° Diagonal viewing angle 46° Vertical viewing angle 27°Physical data Weight 2.2 lb / 985 g 1.2 lb / 545 g 0.6 lb / 290 g Maximum diameter 3.6 in / 91.5 mm 3.6 in / 85.8 mm 2.9 in / 73.8 mm Length 3.2 in / 81.5 mm 2.6 in / 65.5 mm 2.0 in / 50.5 mm Filter diameter 72 mm 58 mmAccessories Lens hood ES 79II ES 78 ES 71II Previous case ES C9 Case LP1216 LP1214 LP1014Retail information Release date September 1989 January 2007 June 1993 Currently in production? No  Yes MSRP $$4210$1599$520

Attribute 1.8 1.8 II 1.8 STM 2.5 Compact Macro ImageKey features Full frame compatible  Yes Image stabilizer  No Ultrasonic Motor  No Stepping Motor  No  Yes  No L series  No Diffractive Optics  No Macro  No  Yes (1:2)Technical data Aperture (max min) 1.8 22 2.5 32 Construction 5 groups / 6 elements 8 groups / 9 elements # of diaphragm blades 5 7 6 Closest focusing distance 1.5 ft / 0.45m 1.15 ft / 0.35m 0.749 ft / 0.228m Max. magnification 0.15x (1:6.6) 0.21x (1:4.8) 0.50x (1:2) Horizontal viewing angle 40° Diagonal viewing angle 46° Vertical viewing angle 27°Physical data Weight 0.4 lb / 190 g 0.3 lb / 130 g 0.3 lb / 159 g 0.6 lb / 280 g Maximum diameter 2.6 in / 67.4 mm 2.6 in / 68.2 mm 2.7 in / 69.2 mm 2.7 in / 67.6 mm Length 1.7 in / 42.5 mm 1.6 in / 41 mm 1.5 in / 39.3 mm 2.5 in / 63 mm Filter diameter 52 mm 49 mm 52 mmAccessories Lens hood ES 65 or ES 65 III ES 62AD ES 68 n/a Previous case ES C9 ES C9 Case LP1014 LP814Retail information Release date March 1987 December 1990 May 2015 December 1987 Currently in production? No  Yes MSRP $$130$125$299

photo. net
KenRockwell. com

KenRockwell. com

Comparison of 50mm 1.4 and 50mm 1.8 at photo. net
Comparison of 50mm 1.2L and 50mm 1.4 by Valentin Blank