Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Кіріспе
Уақыт шегі - бұл электронды схеманың дұрыс жұмыс істеуі үшін сигналдың нақты өзгеруі мен сигналдың өзгеруі мүмкін соңғы уақыт арасындағы айырмашылықты айқындайтын электроника термині. Ол цифрлық электрониканы жобалауда қолданылады.
Timing margin is an electronics term that defines the difference between the actual change in a signal and the latest time at which the signal can change in order for an electronic circuit to function correctly. It is used in the design of digital electronics.
Үлгі
Бұл суретте төменгі сигнал - сағат, жоғарғысы - деректер. Деректерді сағаттың оң жақ шетіндегі схема таниды. Бұл суретте екі уақыт аралығы көрсетілген. Бірі - орнату уақыты, екіншісі - уақыт шегі. Орнату уақыты қызылмен бейнеленген; уақыт шегі жасылмен бейнеленген. Сигналдардың шеттері әр түрлі себептермен нақты әлемдегі электрондық жүйеде қозғалуы мүмкін. Егер сағат пен деректік сигнал бір-біріне қатысты ауыстырылса, бұл уақыт шегін ұлғайтуға немесе азайтуға әкелуі мүмкін; егер деректік сигнал орнату уақыты енгізілгенге дейін өзгерсе, деректер дұрыс түсіндіріледі. Егер тәжірибеден белгілі болса, сигналдар бір-біріне қатысты 2 микросекундқа ауыса алады, мысалы, жүйені кем дегенде 2 микросекунд уақыт шегімен жобалау қабылдаушының деректер сигналын дұрыс түсіндіруіне жол бермейді. Егер контурдың физикалық құрылымы өзгертілсе, мысалы, сағат сигналы берілетін сымдарды көбірек беру арқылы, дерек сигналының жиегі сағат сигналының оң жиегіне жақындап, уақыт шегін азайтады. Егер сигналдар жеткілікті уақыт аралығымен жасалған болса, тек дұрыс деректер ғана қабылданады.
In this image, the lower signal is the clock and the upper signal is the data. Data is recognized by the circuit at the positive edge of the clock. There are two time intervals illustrated in this image. One is the setup time, and the other is the timing margin. The setup time is illustrated in red in this image; the timing margin is illustrated in green. The edges of the signals can shift around in a real world electronic system for various reasons. If the clock and the data signal are shifted relative to each other, this may increase or reduce the timing margin; as long as the data signal changes before the setup time is entered, the data will be interpreted correctly. If it is known from experience that the signals can shift relative to each other by as much as 2 microseconds, for instance, designing the system with at least 2 microseconds of timing margin will prevent incorrect interpretation of the data signal by the receiver. If the physical design of the circuit is changed, for example by giving more wire that the clock signal is transmitted on, the edge of the data signal will move closer to the positive edge of the clock signal, reducing the timing margin. If the signals have been designed with enough timing margin, only the correct data will be received.