Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
Intel микропроцессорлар отбасы
Family of Intel microprocessors
Pentium M – 2003 жылдың наурыз айында ұсынылған және Intel Carmel ноутбук платформасының бөлігін құрайтын, модификацияланған Intel P6 микроархитектурасымен жабдықталған мобильді 32-биттік x86 микропроцессорлар отбасы. Pentium M процессорларының максималды жылу шығыны (TDP) модельге қарай 5–27 Вт аралығында болды және олар ноутбуктерде қолдану үшін жасалған (сондықтан "M" әрпі мобильді екенін көрсетеді). Олар Pentium III процессорларының негізінен дамыды, Pentium 4 процессорларының алдыңғы шина интерфейсін (FSB), жақсартылған командаларды кодтау және орындау бөлімін, жақсартылған тармақ болжамын, SSE2 қолдауын және әлдеқайда үлкен кэш жадты қосты. Алғашқы Pentium M процессор моделі, Banias кодымен, Dothan моделімен ауыстырылды. Pentium M желісі 2009 жылдың шілдесінде ресми баға тізімінен алынып тасталды, оның орнына Core брендімен шығарылған екі ядролы мобильді Yonah процессоры келді, ол өз микроархитектурасын өзгертті. Бұл процессор қуатты көп тұтыну және қызу мәселелеріне тап болған Pentium 4 M процессорын алмастырды.
The Pentium M is a family of mobile 32 bit single core x86 microprocessors (with the modified Intel P6 microarchitecture) introduced in March 2003 and forming a part of the Intel Carmel notebook platform under the then new Centrino brand. The Pentium M processors had a maximum thermal design power (TDP) of 5–27 W depending on the model, and were intended for use in laptops (thus the "M" suffix standing for mobile). They evolved from the core of the last Pentium III–branded CPU by adding the front side bus (FSB) interface of Pentium 4, an improved instruction decoding and issuing front end, improved branch prediction, SSE2 support, and a much larger cache. The first Pentium M–branded CPU, code named Banias, was followed by Dothan. The Pentium M line was removed from the official price lists in July 2009, when the Pentium M branded processors were succeeded by the Core branded dual core mobile Yonah CPU with a modified microarchitecture. It replaced the Pentium 4 M processor, which suffered from power consumption and heat problems.
Баниас
M желісі бастапқыда Израильде жобаланғандықтан, алғашқы Pentium M процессор Голан биіктіктеріндегі ежелгі орнының атымен аталған Banias кодын алды. Intel Haifa командасы бұрын Timna үшін жад контроллерін жасаған, ол P6 жад контроллерінің бұрынғы нұсқаларына негізделген. Бұл оларға P6 архитектурасын толыққанды меңгеруге мүмкіндік берді, және Intel оларға қосалқы мобильді CPU жасауға жедел тапсырма берген кезде осы білімді пайдаланды. 80535 өнім кодын алған процессор бастапқыда модель нөміріне қосымша табельдемесіз шықты, бірақ кейін Pentium M 705 деп белгіленді. Ол 130 нм технологиясымен өндірілді, 900 МГц-ден 1,7 ГГц-ке дейінгі жиіліктерде, 400 МТ/с FSB арқылы жұмыс істеді және 1 мегабайт (МБ) екінші деңгейлі кэшке ие болды. Орташа TDP (термиялық жобалау қуаты) 24,5 ваттты құрады. Banias отбасы процессорлары ішкі түрде Физикалық Мекенжай Көлемін (PAE) қолдайды, бірақ олардың CPUID ақпаратында PAE қолдау белгісі көрсетілмейді. Бұл кейбір операциялық жүйелердің (әсіресе Linux дистрибутивтері) мұндай процессорларда жүктелуден бас тартуына себеп болады, себебі олардың ядроларында PAE қолдауы қажет. Мұндай жағдайларда 'forcepae' Linux жүктеу опциясын пайдалану Linux-тың PAE арқылы жүктелуіне мүмкіндік береді. Windows 8 және одан кейінгі нұсқалары да осы себеппен осы процессорларда іске қосылудан бас тартады, өйткені олар дұрыс жұмыс істеу үшін PAE қолдауын міндетті түрде талап етеді. Бұл процессорлар орнатылған кезде (сондай-ақ, CPUID ақпаратында PAE қолдау белгісі жоқ Dothan отбасы процессорларында) жүктеу кезінде ntoskrnl.exe жүктелуіне әрекеттенгенде 0xc0000260 қате кодымен (ҚОЛДАУ КӨРСЕТІЛМЕГЕН ПРОЦЕССОР) апатқа ұшырайды.
As the M line was originally designed in Israel, the first Pentium M was identified by the codename Banias, named after an ancient site in the Golan Heights. The Intel Haifa team had previously been working on the memory controller for Timna, which was based on earlier P6 memory controller designs giving them detailed knowledge of P6 architecture which they used when Intel gave them a crash project to create a backup mobile CPU. Given the product code 80535, it initially had no model number suffix, but was later identified as the Pentium M 705. It was manufactured on a 130 nm process, was released at frequencies from 900 MHz to 1.7 GHz using a 400 MT/s FSB, and had 1 megabyte (MB) of Level 2 cache. The core average TDP (Thermal Design Power) is 24.5 watts. The Banias family processors internally support Physical Address Extension (PAE) but do not show the PAE support flag in their CPUID information; this causes some operating systems (primarily Linux distributions) to refuse to boot on such processors since PAE support is required in their kernels. Using the 'forcepae' Linux boot option will allow Linux to boot using PAE in these cases. Windows 8 and later also refuses to boot on these processors for the same reason, as they specifically require PAE support to run properly. Attempting to boot with these processors installed (as well as on Dothan family processors without PAE support flag enabled in their CPUID info) will result in a crash when attempting to load ntoskrnl. exe early on in the boot process, with error code 0xc0000260 (UNSUPPORTED PROCESSOR).
Дотан
2003 жылдың 17 қыркүйегінде Intel компаниясы өзінің келесі буын Pentium M процессорларын, ішкі атауы "Dothan" деп жариялады. Ол Израильдегі тағы бір ежелгі қаланың атымен аталды және 2004 жылдың 10 мамырында ресми түрде ұсынылды. Dothan Pentium M процессорлары (өнім коды 80536, CPUID 0x6DX) – бұл Intel процессорларының алғашқыларының бірі, олар процессордың түрлерін нақтырақ ажыратуға мүмкіндік беретін сағаттық жиіліктің көрсеткіші емес, "процессор нөмірі" арқылы анықталады. 400 МТ/с Front Side Bus (FSB) жинағы бар алғашқы Dothan нұсқалары Pentium M 710 (1.4 ГГц), 715 (1.5 ГГц), 725 (1.6 ГГц), 735 (1.7 ГГц), 745 (1.8 ГГц), 755 (2.0 ГГц) және 765 (2.1 ГГц) деп аталды. Бұл бастапқы Dothan модельдерінің барлығы 21 Вт TDP және 2 МБ L2 кэш көлеміне ие. Бұл 700 сериялы Dothan Pentium M процессорлары бастапқы Banias Pentium M-нің негізгі дизайнын сақтайды, бірақ 90 нм технологиясымен өндірілген және екінші деңгейдегі кэш екі есе ұлғайтылған. Чип өлшемі 87 мм² және бастапқы Pentium M-мен салыстырылады, тіпті 1000 сериясында шамамен 140 миллион транзистор бар болса да, олардың көп бөлігі 2 МБ кэшті құрайды. TDP 400 Мт/с FSB жинағымен 21 Вт-қа дейін төмендеді (Banias-та 24,5 Вт), бірақ төменгі жиіліктерде қуат тұтынуы айтарлықтай артты. Дегенмен, тәуелсіз аппараттық шолу сайттары жүргізген сынақтар Banias және Dothan процессорларымен жабдықталған ноутбуктердің батареясының қызмет ету мерзімі шамамен бірдей екенін көрсетті. Сондай-ақ, тәуелсіз аппараттық шолу сайттары Dothan процессорларының Banias процессорларынан көп жағдайда 10-20% жақсырақ өнімділік көрсеткенін анықтады. 2005 жылдың бірінші тоқсанында Dothan ядросының жаңартылған нұсқалары Sonoma чипсеттерімен бірге шығарылды және 533 Мт/с FSB және XD (Intel-дің NX битіне берген атауы) қолдауын алды; сонымен қатар CPUID-де PAE қолдау белгісі қосылды, бұл бұрынғы Pentium M процессорларында қолжетімсіз болған. Бұл Linux дистрибутивтеріндегі, сондай-ақ Windows 8 және одан кейінгі нұсқалардағы жүктеу қателіктерін жойды. Бұл жаңартылған Dothan процессорларына 730 (1.6 ГГц), 740 (1.73 ГГц), 750 (1.86 ГГц), 760 (2.0 ГГц), 770 (2.13 ГГц) және 780 (2.26 ГГц) кіреді және 27 Вт TDP және 2 МБ L2 кэш көлеміне ие. 2005 жылдың шілдесінде Intel 780 (2.26 ГГц) және төмен вольтты 778 (1.60 ГГц) процессорларын шығарды. 2005 жылдан бастап процессорлардың желісінде 1.0 ГГц-тан 2.26 ГГц-қа дейінгі жиіліктерде жұмыс істейтін модельдер болды. Төмен жиілікті модельдер ұзақ батарея қызмет ету мерзімін және төмен жылу шығаруын қамтамасыз ету үшін төмен вольтты немесе өте төмен вольтты процессорлар болып табылады. 718 (1.3 ГГц), 738 (1.4 ГГц) және 758 (1.5 ГГц) модельдері төмен вольтты (1.116 В) және 10 Вт TDP-ға ие, ал 723 (1.0 ГГц), 733 (1.1 ГГц) және 753 (1.2 ГГц) модельдері 5 Вт TDP-мен өте төмен вольтты (0.940 В) процессорлар болып табылады.
On September 17, 2003, Intel unveiled plans for releasing its then next generation of Pentium M processors, codenamed "Dothan" by them. It was named after another ancient town in Israel, and it launched formally on May 10, 2004. Dothan Pentium M processors (product code 80536, CPUID 0x6DX) are among the first Intel processors to be identified using a "processor number" rather than a clockspeed rating; this allowed for more precise distinctions between different kinds of processors. The initial Dothan versions with the 400MT/s Front Side Bus (FSB) are known as Pentium M 710 (1.4 GHz), 715 (1.5 GHz), 725 (1.6 GHz), 735 (1.7 GHz), 745 (1.8 GHz), 755 (2.0 GHz), and 765 (2.1 GHz). These initial Dothan models all have a TDP of 21 W and a 2 MB L2 cache. These 700 series Dothan Pentium M processors retain the same basic design as the original Banias Pentium M, but are manufactured on a 90 nm process, with twice the secondary cache. Die size, at 87 mm2, remains in the same neighborhood as the original Pentium M, even though the 1000 series contains approximately 140 million transistors, most of which make up the 2 MB cache. TDP is also down to 21 watts with the 400 MT/s FSB (from 24.5 watts in Banias), though power use at lower clockspeeds has increased highly. However, tests conducted by third party hardware review sites show that Banias and Dothan equipped notebooks have roughly equivalent battery life. Additionally third party hardware review sites have benchmarked the Dothan at approx 10 20% better performance than the Banias in most situations. Revisions of the Dothan core were released in the first quarter of 2005 with the Sonoma chipsets and supported a 533 MT/s FSB and XD (Intel's name for the NX bit); and the PAE support flag in the CPUID was enabled, unlike earlier Pentium Ms that showed PAE unavailable. This resolved boot errors in Linux distributions as well as in Windows 8 and later. These revised Dothan processors include the 730 (1.6 GHz), 740 (1.73 GHz), 750 (1.86 GHz), 760 (2.0 GHz), 770 (2.13 GHz) and 780 (2.26 GHz) and have a TDP of 27 W and a 2 MB L2 cache. In July 2005, Intel released the 780 (2.26 GHz) and the low voltage 778 (1.60 GHz). The processor line had models running at clock speeds from 1.0 GHz to 2.26 GHz as of 2005. The models with lower frequencies were either low voltage or ultra low voltage CPUs designed for improved battery life and reduced heat output. The 718 (1.3 GHz), 738 (1.4 GHz), and 758 (1.5 GHz) models are low voltage (1.116 V) with a TDP of 10 W, while the 723 (1.0 GHz), 733 (1.1 GHz), and 753 (1.2 GHz) models are ultra low voltage (0.940 V) with a TDP of 5 W.
Intel A100 сериясы
Dothan архитектурасына негізделген, 90 нм технологиясымен жасалған, 512 КБ L2 кэші және 400 МТ/с жылдамдықтағы алдыңғы шинасы (FSB) бар өте төмен қуатты микропроцессор.
An ultra low power microprocessor based on the Dothan built on a 90 nm process with 512 KB L2 cache and 400 MT/s front side bus (FSB).
Соль және дуэт
Келесі буын процессорлары, Yonah кодовое атымен белгіленген, жақсартылған Pentium M архитектурасына негізделген және Intel Core брендімен Core Duo және Core Solo ретінде шығарылды.
The next generation of processors, codenamed Yonah, were based on the Enhanced Pentium M architecture, and released under the Intel Core brand, as Core Duo and Core Solo.