Ithaca 37

The Ithaca 37, also known as the Ithaca Model 37, is a pump action shotgun made in large numbers for the civilian, law enforcement and military markets. Based on a 1915 patent by firearms designer John Browning for a shotgun initially marketed as the Remington Model 17, it utilizes a novel combination ejection/loading port on the bottom of the gun which leaves the sides closed to the elements.

Following the First World War, the Ithaca Gun Company sought to produce a pump action shotgun to compete with the ubiquitous Winchester Model 1912. They used the Remington Model 17 as their model and made modifications—such as simplifying and cost saving alterations of the firing pin and ejection mechanism, the work of Ithaca designer Harry Howland in 1931—while waiting for related patents to expire. After gearing for production of their new shotgun as the Ithaca Model 33 in 1933, Ithaca discovered a Pedersen patent that would not expire until 1937, and production had to be delayed. In 1937, it was released as the Ithaca 37. With the depression dragging on and another war looming on the horizon, it was possibly the worst time to introduce a sporting arm. Many sporting arms ceased production entirely during the same period. While Ithaca did produce some shotguns for military use during the war, they also produced M1911 pistols and M3 submachine guns. After World War II, Ithaca resumed production of the Model 37. Made in many different models, the Ithaca 37 has the longest production run for a pump action shotgun in history, surpassing that of the Winchester Model 12, the original inspiration for Ithaca's entry into the market. Ithaca has suffered many setbacks in its history and changed hands numerous times. At one time, the Ithaca 37 was renamed the Model 87, although it was soon changed back in one of many ownership changes. Production paused in 2005 when Ithaca once again changed hands. Production has resumed in Upper Sandusky, Ohio. According to an article by the Ithaca Times dated June 11, 2003, the one millionth Model 37 was produced in 1968; and as of 2003, more than 2,000,000 Model 37s have been produced. The Ithaca 37 is the only pre–World War II shotgun still in production.

Loading the Ithaca 37 involves inserting shotshells of the proper gauge through the loading/ejection port in the bottom of the receiver and pushing them forward into the magazine until retained by the shell stop. The slide release is pressed and the slide retracted completely then pushed forward. Pulling the trigger fires the gun and releases the slide for reloading. On most models up to 1975, a second sear was installed that would drop the hammer as soon the gun went into battery if the trigger was in a depressed condition. Thus, holding the trigger down allowed the gun to fire the instant a new round is cycled into the chamber without requiring the trigger to be released; this feature was called "slam fire". Otherwise, the Model 37 operates in much the same way as other pump action shotguns; with the exception that, unlike most pump action (and semi automatic) long arms – which usually eject expended shells to one side, usually the right – the Model 37 ejects them downward, through the aforementioned loading/ejection port. This has made the Ithaca popular with left handed users, who may fear hot shells being thrown at them by other guns.

S prefix: were manufactured for a 1962 United States military contract. S prefixed serial numbers ran from approximately 1,000 to 23,000 with "U. S." on the receiver and "P" proof markings on the barrel and receiver. The guns have a Parkerized finish with a barrel and plain stock with plastic butt plate and no sling swivels. A few later contracts produced smaller numbers of guns with sling swivels and serial numbers in the high 900,000 range. Some had "duckbill spreader" shot diverters for use by United States Navy SEALs. Others were fitted with a ventilated handguard and bayonet adapter. New bayonets were manufactured by General Cutlery, Inc. and Canada Arsenal, Ltd.
Ultralite: an aluminium receiver variation. Deerslayer: a version with a shortened barrel and rifle style sighting system. Turkeyslayer: a Synthetic stock (in black and camo pattern) version designed for turkey hunting. DSPS: for Deerslayer Police Special. A military and police version. Stakeout: short version with a barrel and pistol grip stock. Because of its barrel length and overall length, this model is classified as a National Firearms Act 'any other weapon'. 28 Gauge: 28 gauge model built on traditional size 28 gauge receiver. Defense: an affordable 12 or 20 gauge model built for home defense purposes. barrel with 5 round capacity or barrel with 8 round capacity. Essentially the same as the Model 37 M&P's used by military and police for many years.