Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
Intel микропроцессорларында қолданылатын коннектордың физикалық және электрлік сипаттамалары – PC процессор сокеті Slot 1. Slot 1 – Intel микропроцессорларының, оның ішінде Pentium Pro, Celeron, Pentium II және Pentium III процессорларында қолданылатын коннектордың физикалық және электрлік сипаттамаларын білдіреді. Бір және екі процессорлы конфигурациялар қолданылды. Intel 1999 жылы Socket 370-ті шығарғаннан кейін дәстүрлі сокет интерфейсіне қайта оралды.
Physical and electrical specification for the connector used by some Intel microprocessors
a PC processor socket
Slot 1 refers to the physical and electrical specification for the connector used by some of Intel's microprocessors, including the Pentium Pro, Celeron, Pentium II and the Pentium III. Both single and dual processor configurations were implemented. Intel reverted to the traditional socket interface with the release of Socket 370 in 1999.
Жалпы
Pentium II процессорының енгізілуімен, сынақ жүргізуге қажеттілік артуы сокеттен слотқа көшуді қажет етті. Бұрынғы Pentium Pro процессорында Intel процессор мен кэш-жадыны бір Socket 8 корпусына біріктірген болатын. Бұл екі компонент толық жылдамдықты шина арқылы байланыстырылды, нәтижесінде өнімділік айтарлықтай жақсарды. Алайда, бұл әдіс екі компонентті өндіріс процесінің басында, сынақ жүргізуге мүмкіндік болмай тұрып, біріктіруді талап етті. Соның салдарынан, егер кез келген компонентте кішкентай ғана ақау болса, бүкіл жиынтықты тастау қажет болды, бұл өндіріс шығымын төмендетіп, құнына әкелді. Intel кейіннен процессор мен кэш-жады тығыз біріктірілген, бірақ Single Edged Contact Cartridge (SECC) деп аталатын баспалы тізбек тақтасына орнатылған схемалық тізбек тақтасын жасады. Бұл процессор мен кэш-жадыны соңғы жинақталғаннан бұрын жеке-жеке сынауға мүмкіндік берді, бұл шығындарды азайтып, процессорды жоғары деңгейдегі серверлерден өзге нарықтар үшін тартымды етті. Бұл карталарды Slot 1-ге оңай орнатуға болады, соның арқасында процессорды сокетке орнату кезінде оның қосқыштарының бүгіліп немесе сынғануының алдын алуға болады. Slot 1 үшін қолданылған форма-фактор 5 дюймдік ұзындығы және 242 контактілі жиекті SC242 болды. Картридждің дұрыс емес орнатылуын болдырмау үшін слотқа тек бір бағытта орнатуға мүмкіндік беретін кілт қойылды. SC242 кейіннен AMD-нің Slot A слоттарында да қолданылды, екі слот механикалық тұрғыдан бірдей болғанымен, электрлік жағынан үйлесімсіз болды. Slot A пайдаланушыларын Slot 1 процессорын орнатуға тырысудан аулақ тұру үшін, Slot A аналық платаларындағы коннектор 180 градусқа бұрылды. Бұл аналық плата өндірушілеріне Slot 1 және Slot A жинақтары үшін бірдей бөлікті сақтау арқылы шығындарды үнемдеуге мүмкіндік берді. Жаңа Slot 1-мен Intel симметриялық мультипроцессорлық (SMP) қолдауын қосты. Екі слоттық аналық платада ең көп дегенде екі Pentium II немесе Pentium III процессорын пайдалануға болады. Celeron процессорларында ресми SMP қолдауы жоқ. Сондай-ақ, Socket 8 ұясын ұстап тұратын және Pentium Pro процессорын Slot 1 аналық платаларымен пайдалануға мүмкіндік беретін Slotkets деп аталатын адаптерлік карталар бар. Алайда, мұндай адаптерлер сирек кездеседі. Slotkets-тің тағы бір түрі Socket 370 процессорын Slot 1-де пайдалануға мүмкіндік береді. Бұл адаптерлер Socket 8-ден Slot 1-ге арналған адаптерлерге қарағанда көбірек таралған. Осы құрылғылардың көпшілігі жаңа процессорды аналық платаның рұқсат етпейтін төмен кернеуімен қамтамасыз ету үшін өздерінің кернеуді реттегіш модульдерімен жабдықталған.
With the introduction of the Pentium II CPU, the need for greater access for testing had made the transition from socket to slot necessary. Previously with the Pentium Pro, Intel had combined processor and cache dies in the same Socket 8 package. These were connected by a full speed bus, resulting in significant performance benefits. Unfortunately, this method required that the two components be bonded together early in the production process, before testing was possible. As a result, a single, tiny flaw in either die made it necessary to discard the entire assembly, causing low production yield and high cost. Intel subsequently designed a circuit board where the CPU and cache remained closely integrated, but were mounted on a printed circuit board, called a Single Edged Contact Cartridge (SECC). The CPU and cache could be tested separately, before final assembly into a package, reducing cost and making the CPU more attractive to markets other than that of high end servers. These cards could also be easily plugged into a Slot 1, thereby eliminating the chance for pins of a typical CPU to be bent or broken when installing in a socket. The form factor used for Slot 1 was a 5 inch long, 242 contact edge connector named SC242. To prevent the cartridge from being inserted the wrong way, the slot was keyed to allow installation in only one direction. The SC242 was later used for AMD's Slot A as well, and while the two slots were identical mechanically, they were electrically incompatible. To discourage Slot A users from trying to install a Slot 1 CPU, the connector was rotated 180 degrees on Slot A motherboards. This also allowed motherboard manufacturers to save costs by stocking the same part for both Slot 1 and Slot A assemblies. With the new Slot 1, Intel added support for symmetric multiprocessing (SMP). A maximum of two Pentium II or Pentium III CPUs can be used in a dual slot motherboard. The Celeron does not have official SMP support. There are also converter cards, known as Slotkets, which hold a Socket 8 so that a Pentium Pro CPU can be used with Slot 1 motherboards. These specific converters, however, are rare. Another kind of slotket allows using a Socket 370 CPU in a Slot 1. These are generally more common than Socket 8 to Slot 1 slotkets. Many of these latter devices are equipped with their own voltage regulator modules, in order to supply the new CPU with a lower core voltage, which the motherboard would not otherwise allow.
Форма факторлары
Single Edge Contact Cartridge, немесе "SECC", Pentium II процессорлары үшін Slot 1 дәуірінің басында қолданылған. Картридж ішінде процессордың өзі гибридті пластик және металл корпуста орналасқан. Корпустың артқы жағы пластиктен жасалған және онда бірнеше белгілер бар: "Pentium II" атауы; Intel логотипі; голограмма; және модель нөмірі. Алдыңғы жағы қара анодталған алюминий тақтадан тұрады, ол CPU салқындатқышын бекітуге арналған. SECC конструкциясы өте берік, себебі процессордың өзі корпустың ішінде қауіпсіз орналасқан. Сокеттік процессорлармен салыстырғанда, иіліп зиян көретін қосқыштар жоқ, және процессор салқындатқышты дұрыс орнатпаудан зақымдану мүмкіндігі азайды. SECC-ден кейін нарықта SEPP (Single Edge Processor Package) пайда болды. Ол неғұрлым қолжетімді Celeron процессорлары үшін әзірленген. Бұл конструкцияда корпус мүлдем жоқ, тек компоненттерді ұстап тұратын баспалы схема тақтасы бар. Кейінгі Pentium II және Pentium III процессорлары үшін 1-ші слотта SECC2 деп аталатын форма факторы қолданылды, ол флип-чип технологиясына көшуге бейімделу үшін жасалған. Тек алдыңғы тақта сақталды, салқындатқыштар енді тікелей баспалы схема тақтасына орнатылды және процессор кристалы ашық қалды, сондықтан SECC картридждерімен үйлесімсіз.
The Single Edge Contact Cartridge, or "SECC", was used at the beginning of the Slot 1 era for Pentium II CPUs. Inside the cartridge, the CPU itself is enclosed in a hybrid plastic and metal case. The back of the housing is plastic and has several markings on it: the name, "Pentium II"; the Intel logo; a hologram; and the model number. The front consists of a black anodized aluminum plate, which is used to hold the CPU cooler. The SECC form is very solid, because the CPU itself is resting safely inside the case. As compared to socket based CPUs, there are no pins that can be bent, and the CPU is less likely to be damaged by improper installation of a cooler. Following SECC, the SEPP form (Single Edge Processor Package) appeared on the market. It was designed for lower priced Celeron CPUs. This form lacks a case entirely, consisting solely of the printed circuit board holding the components. A form factor called SECC2 was used for late Pentium II and Pentium III CPUs for Slot 1, which was created to accommodate the switch to flip chip packaging. Only the front plate was carried over, the coolers were now mounted straight to the PCB and exposed CPU die and are, as such, incompatible with SECC cartridges.
Тарих
Intel P6 процессорлары үшін үш платформа болды: Socket 8, Slot 1 және Socket 370. Slot 1, Socket 8-дің ізбасары. Socket 8 процессорларында (Pentium Pro) L2 кэші тікелей процессорға енгізілгенімен, ол ядродан бөлек, ядромен бірге схемалық тақтада орналасқан. Бірақ, Coppermine ядросы бар кейінгі Slot 1 процессорларында L2 кэші кристалға енгізілген. 2000 жылдың басында, FC PGA корпусындағы Coppermine Pentium III процессорлары кеңінен таралған кезде, Intel 1998 жылдың соңынан бері Socket 370 және Slot 1 процессорларын бір уақытта ұсынғаннан кейін Slot 1 бірте-бірте Socket 370-ке ауысты. Socket 370 бастапқыда Mendocino Celeron процессорларынан басталатын, төмен бағалы Celeron процессорлары үшін жасалса, Slot 1 – Pentium II және алғашқы Pentium III модельдеріне арналған платформа ретінде қарастырылды. Кэш пен ядро екеуі де кристалға енгізілген. Slot 1 сонымен қатар, кем дегенде Intel үшін, үй пайдаланушылары үшін стандартты платформа ретінде ескі Socket 7-ні қолданыстан шығарды. Intel P5 Pentium MMX процессорларын алмастырғаннан кейін, Intel Socket 7 нарығынан толығымен бас тартты.
Historically, there are three platforms for the Intel P6 CPUs: Socket 8, Slot 1 and Socket 370. Slot 1 is a successor to Socket 8. While the Socket 8 CPUs (Pentium Pro) directly had the L2 cache embedded into the CPU, it is located (outside of the core) on a circuit board shared with the core itself. The exception is later Slot 1 CPUs with the Coppermine core which have the L2 cache embedded into the die. In the beginning of 2000, around the time the Coppermine Pentium III CPUs with FC PGA housing were already commonplace, Slot 1 was slowly succeeded by Socket 370, after Intel had already offered Socket 370 and Slot 1 CPUs at the same time since late 1998. Socket 370 was initially made for low cost Celeron processors starting with the Mendocino Celerons, while Slot 1 was thought of as a platform for the more expensive Pentium II and early Pentium III models. Both cache and core were embedded into the die. Slot 1 also obsoleted the old Socket 7, at least regarding Intel, as the standard platform for home users. After superseding the Intel P5 Pentium MMX CPU, Intel completely left the Socket 7 market.