Жылдамдықты камералар және олардың қолданылуы

none

A high speed camera is a device capable of capturing moving images with exposures of less than second or frame rates in excess of 250 frames per second. It is used for recording fast moving objects as photographic images onto a storage medium. After recording, the images stored on the medium can be played back in slow motion. Early high speed cameras used photographic film to record the high speed events, but have been superseded by entirely electronic devices using an image sensor (e. g. a charge coupled device (CCD) or a MOS active pixel sensor (APS)), recording, typically, over 1 000 frames per second onto DRAM, to be played back slowly to study the motion for scientific study of transient phenomena.

The show MythBusters prominently uses high speed cameras for measuring speed or height. Time Warp was centered around the use of high speed cameras to slow things down that are usually too fast to see with the naked eye. High speed cameras are frequently used in television productions of many major sporting events for slow motion instant replays when normal slow motion is not slow enough, such as international Cricket matches.

High speed cameras are frequently used in science in order to characterize events which happen too fast for traditional film speeds. Biomechanics employs such cameras to capture high speed animal movements, such as jumping by frogs and insects, suction feeding in fish, the strikes of mantis shrimp, and the aerodynamic study of pigeons' helicopter like movements using motion analysis of the resulting sequences from one or more cameras to characterize the motion in either 2 D or 3 D.

The move from film to digital technology has greatly reduced the difficulty in use of these technologies with unpredictable behaviors, specifically via the use of continuous recording and post triggering. With film high speed cameras, an investigator must start the film then attempt to entice the animal to perform the behavior in the short time before the film runs out, resulting in many useless sequences where the animal behaves too late or not at all. In modern digital high speed cameras, the camera can simply record continuously as the investigator attempts to elicit the behavior, following which a trigger button will stop the recording and allow the investigator to save a given time interval before and after the trigger (determined by frame rate, image size and memory capacity during continuous recording). Most software allows saving a subset of recorded frames, minimizing file size issues by eliminating useless frames before or after the sequence of interest. Such triggering can also be used to synchronize recording across multiple cameras. The explosion of alkali metals on contact with water has been studied using a high speed camera. Frame by frame analysis of a sodium/potassium alloy exploding in water, combined with molecular dynamic simulations, suggested that the initial expansion may be the result of a Coulomb explosion and not combustion of hydrogen gas as previously thought. Digital high speed camera footage has strongly contributed to the understanding of lightning when combined with electric field measuring instrumentation and sensors which can map the propagation of lightning leaders through the detection of radio waves generated by this process.

When moving from reactive maintenance to predictive maintenance, it is crucial that breakdowns are really understood. One of the basic analysis techniques is to use high speed cameras in order to characterize events which happen too fast to see, e. g. during production. Similar to use in science, with a pre or post triggering capability the camera can simply record continuously as the mechanic waits for the breakdown to happen, following which a trigger signal (internal or external) will stop the recording and allow the investigator to save a given time interval prior to the trigger (determined by frame rate, image size, and memory capacity during continuous recording). Some software allows viewing the issues in real time, by displaying only a subset of recorded frames, minimizing file size and watch time issues by eliminating useless frames before or after the sequence of interest. High speed video cameras are used to augment other industrial technologies such as x ray radiography. When used with the proper phosphor screen which converts x rays into visible light, high speed cameras can be used to capture high speed x ray videos of events inside mechanical devices and biological specimens. The imaging speed is mainly limited by the phosphor screen decay rate and intensity gain which has a direct relationship on the camera's exposure. Pulsed x ray sources limit frame rate and should be properly synchronized with camera frame captures.

In 1950 Morton Sultanoff, a physicist for the U. S. Army at Aberdeen Proving ground, invented a super high speed camera that took frames at one millionth of a second, and was fast enough to record the shock wave of a small explosion. High Speed digital cameras have been used to study how mines dropped from the air will deploy in near shore regions, including development of various weapon systems. In 2005 high speed digital cameras with 4 megapixel resolution, recording at 1500 fps, were replacing the 35mm and 70mm high speed film cameras used on tracking mounts on test ranges that capture ballistic intercepts.