Брисбен Орталық Техникалық Колледжінің мұрасы

Heritage listed building in Brisbane, Queensland

Brisbane Central Technical College is a heritage listed technical college at 2 George Street, Brisbane City, City of Brisbane, Queensland, Australia. It was built from 1911 to 1956. It became the Queensland Institute of Technology (QIT) in 1965, and then in 1987 that became the Queensland University of Technology (QUT 1987 to present). It was added to the Queensland Heritage Register on 27 August 1999. The college was founded in 1908, and eventually became the Queensland Institute of Technology. While not able to grant bachelor's degrees, the college was able to issue diplomas which gave the recipients the right to "letters" after their name. In 1987 it became Queensland University of Technology and could award bachelor's degrees as well as higher degrees such as Master and Doctorates.

Overlooking the City Botanic Gardens, the former Brisbane Central Technical College sits between Parliament House and Old Government House at the southeast end of George Street. From a group of nine purpose built buildings designed and constructed for technical education classes between 1909 and 1956, six, bold, red facebrick buildings remain from the 1909 master plan along with three extensions to the original Workshops block. A later addition, the imposing, two storey, red facebrick neo Georgian former Library building (U Block) faces the Main Drive adjacent to the kidney lawn of Old Government House. Blocks A, E, F, G, H and J with its extensions Blocks K, R and W, are buildings of two to four storeys of an industrial character in a confident, restrained, simplified classicism characteristic of the Arts and Crafts idiom. The buildings are grouped around the original central courtyard now paved and landscaped with planted beds. A Block faces the Main Drive and is a landmark building at the main entrance gate to the campus. E, F, G and H blocks are grouped around the courtyard. J Block and extensions form a visual and physical close to the courtyard and are on the alignment of the roadway to the rear of the campus. U Block extends down the Main Drive preserving the alignment of the original master plan along this roadway. Blocks A, E, F, G, H and J are unified in their general elevational treatment, materials and detailing. All are red facebrick with contrasting features in dark red brick including relieved quoining, arched entrance porches, flat arched window heads and banding to floor levels. The original building department name appeared in metal lettering in an Art Nouveau style within a carved stone tablet above the entrance porch to each building. Only "Chemistry" on the east entrance to E Block survives. The central courtyard formed by the building group is a compact light, airy space. The pathways between the buildings provide visual and physical links with the courtyard and with the other buildings. The position of building entrances and corridors indicate the proposed circulation patterns that connect the buildings as a group. The buildings, courtyard and surviving paths between the buildings of the former Brisbane Central Technical College precinct are of cultural heritage significance. Building descriptions for Blocks A, E, F, G, H, J, K, R, W and U follow.

Constructed: 1912–1914, Additional storey: 1924 Architect: T. Pye

A, B and C Blocks were designed as sentinel buildings to align with the Main Drive and to form the formal entrance to the Brisbane Central Technical College. A and C Blocks were almost mirror images and flanked the main building of the college, B Block. A Block was opened in 1915 as the Commercial and Day School and an additional storey following a similar plan to the earlier work was constructed in about 1924 to accommodate increasing enrolments. The Commercial High School was also accommodated in the building from 1933. The building interior has been altered, particularly during the refurbishment of 1996–1998, but the building form and exterior remain. Recent work has established walkway links envisaged in the original master plan. A Block now links with F Block at ground and first floor levels through the connecting gangways and passageways of the 1999 D Block.

Adjacent to the Main Gate at the southeast end of George Street and on alignment with the Main Drive, the three storey, facebrick, hip roofed former Commercial and Day School overlooks the City Botanic Gardens. Each elevation is composed of light red facebrick with contrasting dark red facebrick relieved quoining, flat window arches and banding marking the floor levels. Prominent metal rainwater heads and downpipes divide the elevations into bays. The main elevation to the city Botanic Gardens is symmetrical about a narrow pedimented breakfront of dressed stone enriched with stone carving. The flat arched, central entrance porch with a prominent keystone in stone is flanked by posts with decorative carved shields to the capitals beneath an open bed segmental pediment with decorative carving to the tympanum. A decorative metal grille fanlight sits over the porch entranceway. An arched porch entrance to the south opens onto the central courtyard and the arched entrance to the west connects with the new D Block undercroft link to F Block. There is a new metal bridge link across to B Block from the second floor. There are double hung windows to the ground floor of the front elevation with multi pane casements to the upper floors. The other elevations have both double hung and multi pane casement windows to each level. Originally each floor accommodated classrooms and staff offices off a central corridor from east to west meeting a transverse corridor running along the rear wing from north to south connecting with the walkways which in the original master plan were to link with adjacent buildings. The internal spaces have been altered and are now organised off the original corridors as large studio spaces and smaller office spaces. Some original joinery remains, including six pane glazed doors to the ground floor and nine pane glazed doors to the first and second floors, skirtings to the corridors, high timber rails to A208, timber rails at two levels in A204. The original stair to the ground and first floors of polished concrete with exposed aggregate remains and continues in plain concrete to the c. 1924 extension second floor. A decorative steel balustrade with timber handrail runs along the whole stair.

Constructed: 1911–1914. Architect: T. Pye Alterations and additions: 1932, 1937, 1960s, 1990

A two storey L shaped building with a rectangular pavilion across a walkway to the south, this building opened in 1915 to accommodate the Chemistry and Geology departments of the Brisbane Central Technical College. The building underwent alterations and additions in 1932, 1937, 1960s and 1990 and is now a U shaped four storey building with a southern wing. In 1932 alterations were undertaken to accommodate the Commercial High School; the northeast corner was added in 1937; an additional corner to the southwest and a third storey were constructed during the 1960s to accommodate classes for art and pharmacy; a fourth storey was added in 1990.

Block E is located to the south of the courtyard between Blocks B and G/H. Now four storeys, it has grown out of the former Chemistry and Geology building and is unified with the other buildings in the group in general elevational composition, detailing and materials. It is a plain building in light red facebrick with contrasting dark red facebrick to the relieved quoins, flat window arches and banding marking the interior floor levels. The only decoration is the Art Nouveau metal lettering "Chemistry" above the arched entrance porch to the east. The 1937 infill to the northeast continues the original elevational treatments and is well matched to the original while the 1960s addition to the southwest corner in light brick with no texturing or banding and smaller vertical fenestration is less sympathetic. The solid balustraded, setback upper storey (1990) contrasts with the rest of the building and disturbs the building's cohesion with the group. A barrel shaped, corrugated metal hood has been added over the steps to the east entrance porch. The interior has been altered and is now a range of laboratories, lecture theatres, staff offices and ancillary service/storage/work areas arranged off the main east–west corridor of the original master plan. There are concrete stairs at each end. Some early fabric survives including the concrete stair with plain metal balustrading to the east, some joinery and stop chamfered concrete beams and posts to the ground floor. The interior walls are painted or plastered brick, with plain plastered ceilings and concrete floors (some with vinyl and carpet floor coverings). Suspended ceilings conceal plaster ceilings.

Constructed: 1911 1914 Architect: T. Pye

Opened in 1915 to accommodate classes for wool classing, building construction and botany this two storey building has a tough and distinctive industrial character. With the dedication of purpose built classing facilities for the training of wool classers, the building demonstrates the importance of the wool industry in Queensland. The form and fabric of the building are substantially intact. During the mid 1990s alterations have been made to some of the internal spaces. The large wool classing room to the first floor is now partitioned into smaller studios and teaching spaces. The partitioning screens, with clear perspex to the upper portions, allow the filtered light from the saw toothed roofs to penetrate the space.

The distinctive form of this building expresses the saw toothed roof line in the north and south elevations. Unified with the other buildings in the group in scale, materials and detailing the elevational infill is in light red facebrick contrasting with the dark red facebrick of the flat arch window openings and the relieved quoining to the corners and pilasters which define the bays in the elevations. Prominent rainwater heads and downpipes contribute to the vertical rhythm. The arched entrance, now without the identifying building title within the tablet above, remains to the east and opens onto the undercroft of the new D Block which reinstates the link of the original master plan across to A Block. The timber entrance doors have been replaced with glass doors. The plan is organised about an L shaped corridor off which studios, workshops, staff offices and storage/service areas open. Some internal spaces have been partitioned but the original internal spatial relations have been maintained though service ducts and lighting fixtures now intrude. Original fabric survives including the roof lights and pressed metal ceilings to the level two former woolclassing area now partitioned as F204 and F201; decorative pressed metal ceilings, concrete columns in a Tuscan order and dentilled plaster cornices with egg and dart mouldings to the ceilings and exposed beams in F101; decorative pressed metal ceilings with moulded "acanthus" pattern cornices to the corridors of level two; decorative pressed metal ceilings to the vestibule to the link across to J Block from level 2; decorative plaster cornice to the ceiling of the stairwell; doors and skirting boards to each floor; tiles to floor and walls of locker rooms on each level; and a polished concrete stair with plain metal balustrading.

Constructed: 1911–14. Architect: T. Pye

A small, two storey pavilion building to accommodate classes in physics and electrical engineering, an additional storey was constructed during the original building contract to accommodate classes in Biology. A single storey toilet block was also erected to the northeast before the building was opened in 1915. This toilet block was demolished in the 1960s. The building accommodated the QIT library from the mid 1960s to 1977 and housed the School of Nursing during the 1980s. The glass and concrete infill connecting G and H blocks was inserted in 1990.

Lying to the south of the courtyard, this is the smallest building in the group and is timber framed. A three storey, hip roofed, facebrick pavilion with a service wing to the east expressed as two towers, this building is unified with the other buildings in scale, detail and materials. The regular rhythm of flat arched windows around the building and the relieved quoining in dark red brick contrast to the light red infill panels of the building. Now removed, the former single storey toilet block is evident in the rendered and painted lower portion of the external east wall. The building title has been removed from stone tablet above the dark red brick, arched entrance porch to the west. Classrooms and staff offices open off a central corridor within the pavilion section of the building. Early fabric survives including timber lined ceilings and the cedar main staircase. An infill link of glass and concrete to H Block has diminished the reading of these buildings as separate structures.

Constructed: 1911–1914. Architect: T. Pye

Opened in 1915 the building was constructed to the design amended by Pye during the construction period. The amendments included the insertion of the oriel window to the south, a reconfiguring of the plan placing the main entrance in the southeast wing and elevational changes reflecting alterations to the plan. The Boiler Room and associated stack were demolished in the early 1970s and lecture rooms and storage rooms in the south wing were demolished in the late 1970s. Corrugated metal sheeting covers the rent in the building to the south. A concrete and glass infill wing was inserted between H and G Blocks in 1990.

A two storey, hip roofed, facebrick square pavilion with a rectangular workshop wing stepping downhill to the west, this building is distinguished by its four storey, rectangular tower. Elevational treatments and detailing are similar to those used in the other buildings in the group, including the relieved quoining, flat arched window openings and arched entrance porch in contrasting dark red brick. The machine room basement is distinguished by the semi circular arched window openings in dark red brick to this level. A distinctive oriel window to the south contains the stair landing and links the pavilion wing to the rectangular west wing at first floor level. Hooks and other marks in the west exterior wall are evidence of the demolished Boiler Room and associated brick stack. Corrugated metal sheeting to the south wall covers the wall to the demolished south wing. Shadowing on the carved stone tablet above the arched entrance porch to the east indicates the original Art Nouveau style lettering "Engineering". The interior has been altered but original fabric remains. The plan is organised about a central corridor with a polished plain concrete stair with metal balustrade in the south corner. The basement machine room is intact, retains a workshop use and is notable for the exposed timber structure of the floor above, arched brickwork and steel lifting beams (plated "Manchester 1912"). The room may be viewed from the ground floor corridor above through arched brick windows. The ceiling to this corridor and through to 209A is sheeted with decorative pressed metal with stylised acanthus moulded cornices. Decorative pressed metal ceilings remain in several rooms and corridors. Room 306 retains exposed timber trusses and decorative pressed metal ceilings; room 405 remains as a galleried lecture theatre with decorative pressed metal ceilings; glazed timber partitions remain in room 202.

Constructed: 1911–1914. Architect: T. Pye Extensions: K (1920) A. Irving; R (1928–29) WH Gillies; W (1951–1956) MD Hamilton

Distinguished in plan form and massing from the other buildings in the group, J Block was opened in 1915 accommodating the trades workshops. The planning and siting of the building reflect the consideration given to massing and ventilation suitable for accommodating noisy and often hot workshops. Further pavilions (K block 1920, R block 1929, W block 1956) have been constructed west of J Block to accommodate additional workshops and teaching spaces. The first floor workshops have been altered during the 1996 98 refurbishment to accommodate architecture and interior design studios in a mezzanine inserted into these workshop spaces. The building retains its general planning arrangement.

A long, rectangular, two storey, facebrick building with a hip roof drawn down over latticed lateral verandahs, the former Workshops building is sited west of F, G and H blocks and closes the courtyard visually to the west. Though different in form, the building is unified with the other buildings in the group in scale, detailing and materials. It is distinguished by dark red facebrick rusticated verandah columns which split to two thinner paired columns in the centre bay at first floor level. There also is contrasting dark red brick banding to sill levels, the flat arched double hung windows to the ground floor and segmental arched double hung windows with fanlights to the first floor. Symmetrical about a central service/circulation core, there are four workshops opening to both verandahs on each level. A timber and steel mezzanine structure is inserted in the first floor workshop spaces while retaining the original planning arrangement. Original fabric survives including window and door joinery; exposed timber trusses to the first floor workshops; and decorative pressed metal ceilings to the west verandah, rooms J205, J210, J211, J215, J110 and the stairwell. The central plain polished concrete stair with plain metal balustrading and timber handrail remains from the ground floor to the intermediate landing.

Blocks K, R and W have been erected to the west of J Block, all similar in style to the original group of buildings. A later infill link has been inserted between Blocks K and R.

K Block is a simple rectangular, hip roofed, three storey, facebrick pavilion adjoining J block. Completed in 1920 it was designed to match and align with existing work. It features the regular fenestration rhythm of flat arched double hung windows of the earlier buildings in the group. The workshop spaces on each floor are now partitioned into smaller units. Erected in 1929 to house the Industrial High School, Block R is a simple rectangular, hip roofed, three storey, facebrick pavilion linked to J Block by a gangway at the ground and first floor levels. Constructed on reinforced concrete piers and beam foundations, the basement floors are of concrete and the upper floors of timber. The planning of the building is altered from the original with workshops and classrooms now partitioned into smaller units. The stair to the west has been removed and vertical circulation for both K and R is now within the inserted link wing. Completed in 1956, W Block is a four storey, hip roofed, facebrick building to the northwest of J Block. Of a similar character to the earlier building but only using light red brick, the W Block has a regular rhythm of paired double hung windows to the long elevations and incised brickwork to the corners. There have been alterations to the interiors but the general planning of workshops and teaching spaces remains. The concrete stair with metal balustrade to the west is intact.

Constructed: 1935. Architect: N. Thomas

Opened in 1935 to house the University of Queensland Library, the building also accommodated various Central Technical College activities including part of the Commercial High School from 1938. Classes for architecture and building construction were conducted in the building. The administration of the newly formed QIT occupied the building in 1966 and during the 1960s and 1970s classrooms, the optometry clinic and the printery also operated out of this building. The south wing was refurbished during 1995/96 for the QUT Chancellery Offices (U block).

Erected in 1935 U Block, adjacent to Old Government House, is a long, imposing, three storey, facebrick building resting on a rusticated freestone base facing the Main Drive and overlooking the City Botanic Gardens. Symmetrical about a giant order Ionic portico entrance, the building is approached by a wide sweep of concrete stairs from the Main Drive. The main wing terminates in rectangular pavilions which extend to the west forming a courtyard to the rear of the building. Two sets of stairs parallel to the front elevation arrive at minor entrances to the front of each end pavilion. Giant order, rendered pilasters divide the front elevation into ten bays of flat arched, four pane casement windows with fanlights. The other elevations have a similar rhythm of pilasters and fenestration and the blind west elevations of the pavilions are defined by paired rendered pilasters. The west elevation is symmetrical about a flat arched, freestone entrance porch below a double height vertical stairwell window. A U shape plan organised about a single loaded corridor to the west of the main wing, the interior is now altered. The large open spaces in the pavilions have been partitioned and organised off a single loaded corridor to the courtyard side. Vertical circulation and services remain to the west of these pavilions. The gallery to the level two south pavilion has been removed. This area was refurbished into partitioned offices and meeting spaces for the QUT Chancellery in 1995/96. Internal fabric has been lost but early fabric remains including the casement windows to the perimeter of the building, front and rear entrance doors, doors to former seminar and storage rooms off the central circulation core, the columns in the entry vestibule and the sets of concrete stairs to the west of the main wing and to the pavilions. Decorative plaster flat arches remain to the central stairwell.

The former Brisbane Central Technical College was listed on the Queensland Heritage Register on 27 August 1999 having satisfied the following criteria. The place is important in demonstrating the evolution or pattern of Queensland's history. The former Brisbane Central Technical College, erected 1911–1915, is important for its association with the development of education in Queensland. As the centre of technical education in Queensland, the place is important in demonstrating the development of technical education in the State. The place is important for demonstrating on one site, major changes to technical education from 1900. In particular, the place is important for demonstrating the expansion of technical education in response to retraining requirements for returned soldiers from both World Wars and in response to increases in trade apprenticeships from the 1920s. The Main Drive, which runs from the George Street entrance of the campus and terminates at Old Government House, is a significant element of the site. The driveway maintains a strong association with Old Government House as the traditional link between it and Parliament House and the government precinct and the city beyond. The Driveway is significant as an element of the Central Technical College and later, Gardens Point Campus with the buildings of the campus designed to address the driveway. The place demonstrates rare, uncommon or endangered aspects of Queensland's cultural heritage. The former Brisbane Central Technical College is important for demonstrating changes in Government involvement in financing and controlling technical education from 1900. The former Brisbane Central Technical College is important as the only technical college in Queensland designed and constructed as a complex of buildings. The place is important in demonstrating the principal characteristics of a particular class of cultural places. The buildings are fine examples of technical college structures of the early twentieth century constructed in response to progressive thinking in the design and planning of educational institutions. The place is important because of its aesthetic significance. The former Brisbane Central Technical College has aesthetic significance as a cohesive group of buildings unified by scale, design and materials. Landmark buildings at the southeast end of George Street, the group overlooks the City Botanic Gardens to the east and the Brisbane River to the west. Bold, facebrick structures with a tough industrial character enriched by discrete decorative stone carving, the buildings are characteristic of the Arts and Crafts idiom in form and detailing. The buildings are of considerable architectural merit and their form and fabric illustrate a skilled design approach. The buildings demonstrate a fine quality of workmanship in the detailing of materials and finishes. The group is important for original fabric which survives, particularly F Block for its overall intactness and the machine room in H block for its intactness. A Block and U Block are important in preserving the campus alignment to the Main Drive. Both are important as landmark buildings defining the principle entry to the former Brisbane Technical College precinct. The courtyard and surviving pathways between the buildings are important in maintaining the integrity of the group of buildings. Further Block U provides evidence of the changing nature of the educational facility on the site. The place has a strong or special association with a particular community or cultural group for social, cultural or spiritual reasons. The former Brisbane Central Technical College is important for its association with students and teachers of the former Brisbane Central Technical College, the Industrial High School, the Commercial High School, the Queensland Institute of Technology and the Queensland University of Technology. The place has a special association with the life or work of a particular person, group or organisation of importance in Queensland's history. The former Brisbane Central Technical College is important for its association with the Department of Public Works. In particular, with the work of architect Thomas Pye who was responsible for the design of the original complex of nine buildings. The former Brisbane Central Technical College is important for the ability to demonstrate the work of the Government Architect's Office in relation to the design of substantial educational buildings.