Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Кіріспе
Күміс теллуриді (Ag2Te) – күмістің теллуриді, сондай-ақ дикүміс теллуриді немесе күміс(I) теллуриді деп те аталады. Ол моноклиндық кристалды құрайды. Жалпы мағынада, күміс теллуриді AgTe (күміс(II) теллуриді, тұрақсыз қосылыс) немесе Ag5Te3 белгілеу үшін де қолданылуы мүмкін. Күміс(I) теллуриді табиғатта гессит минералы ретінде кездеседі, ал күміс(II) теллуриді – импрессит деп белгілі. Күміс теллуриді – n және p типтерінде допингтелуі мүмкін жартылай өткізгіш. Стойхиометриялық Ag2Te n типінде өткізгіштікке ие. Қыздырғанда материалдан күміс буланып кетеді. Стойхиометриялық емес күміс теллуридінің магниттік кедергісі өте жоғары.
Silver telluride (Ag2Te) is a chemical compound, a telluride of silver, also known as disilver telluride or silver(I) telluride. It forms a monoclinic crystal. In a wider sense, silver telluride can be used to denote AgTe (silver(II) telluride, a metastable compound) or Ag5Te3. Silver(I) telluride occurs naturally as the mineral hessite, whereas silver(II) telluride is known as empressite. Silver telluride is a semiconductor which can be doped both n type and p type. Stoichiometric Ag2Te has n type conductivity. On heating silver is lost from the material. Non stoichiometric silver telluride has shown extraordinary magnetoresistance.
Синтез
Күмiс теллуридi (AgTe) электрохимиялық жинақтау тәсiлiмен синтезделедi. Тәжірибе потенциостат пен бөлме температурасында Ag нанобөлшектерiн қамтитын 200 мл 0,5 М күкірт қышқылының электролиттiк ерiтiндiсi бар үш электродты жасуша арқылы жүргiзуге болады. Содан кейін вольфрам дителлуридiнiң (WTe2) қосылысында қолданылатын күмiс пастасы электролитке сiңiп, аз мөлшерде Ag электролитте ерiйдi. Электролиттi магниттiк тағанмен араластырып, сутектi көпiршiктердi жоюға болады. Күмiс-күмiс хлорид электроды мен платина сымы эталондық және қарсы электродтар ретiнде пайдаланылуы мүмкiн. Барлық потенциалдар эталондық электродқа қатысты өлшенiп, ERHE = EAg/AgCl + .059 pH + .197 теңдеуi арқылы калибрленедi. Көлденең AgTe-дi өсiру үшiн WTe2 1,2 және 0 вольт арасында 100 мВ/с сканерлеу жылдамдығымен бiрнеше циклдiк вольтметрлiк әдiспен өңделедi. Глутатионмен қапталған Ag2Te нанобөлшектерiн 10 мМ AgNO3, 5 мМ Na2TeO3 және 30 мМ глутатион бар 9 мл ерiтiндi дайындау арқылы синтездеуге болады. Бұл ерiтiндi мұз ваннасына қойыңыз. Ерітiндiге N2H4 қосылып, реакцияны үнемі араластыра отырып, 5 минут бойы жүргізуге рұқсат етiледi. Нанобөлшектер үш рет центрифугалау арқылы жуылады, үш рет жуып болғаннан кейiн нанобөлшектер ПБС-те тоқтата тұрады және сол әдiспен тағы да жуылады.
Porous silver telluride (AgTe) is synthesized by an electrochemical deposition method. The experiment can be performed using a potentiostat and a three electrode cell with 200 mL of 0.5 M sulfuric acid electrolyte solution containing Ag nanoparticles at room temperature. Then a silver paste used in the tungsten ditelluride (WTe2) attachment leach into the electrolyte which causes small amounts of Ag to dissolve in the electrolyte. The electrolyte was stirred by a magnetic bar to remove hydrogen bubbles. A silver silver chloride electrode and a platinum wire can be used as reference and counter electrodes. All the potentials can be measured against the reference electrode, and it was calibrated using the equation ERHE = EAg/AgCl + .059 pH + .197. In order to grow the porous AgTe, the WTe2 was treated using multiple cyclic voltammetry between 1.2 and 0 volts with a scan rate of 100 mV/s. Glutathione coated Ag2Te Nanoparticles can be synthesized by preparing a 9 mL solution containing 10 mM AgNO3, 5mM Na2TeO3, and 30 mM glutathione. Place that solution in an ice bath. N2H4 was added to the solution and the reaction is allowed to proceed for 5 min under constant stirring. Then the nanoparticles are washed three times by a way of centrifugation, after the three washes the nanoparticles are suspended in PBS and washed again with that same method.