Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Кіріспе
dbx Model 700 Digital Audio Processor - кәсіби аудио ADC/DAC комбинациясы, ол стерео-аналогты аудионы бит ағынына цифрландырады, содан кейін оны кодтады және аналогты композиттік бейне сигналына қаптады, тасу ретінде VCR-ді пайдалана отырып, таспаға жазу үшін. Sony PCM F1 сияқты басқа ұқсас жабдықтардан айырмашылығы, 700 модельінде қазіргі кездегі жалпы импульстік код модуляциясы емес, Companded Predictive Delta Modulation деп аталатын әдіс қолданылды. 1980 жылдардың ортасында енгізілген кезде бұл құрылғы бұл әдісті қолданған алғашқы коммерциялық өнім болды, бірақ ол 1960 жылдары ұсынылып, 1970 жылдардың соңында прототиптелген болатын.
The dbx Model 700 Digital Audio Processor was a professional audio ADC/DAC combination unit, which digitized a stereo analog audio input into a bitstream, which was then encoded and encapsulated in an analog composite video signal, for recording to tape using a VCR as a transport. Unlike other similar pieces of equipment like the Sony PCM F1, the Model 700 used a technique called Companded Predictive Delta Modulation, rather than the now common pulse code modulation. At the time of its introduction in the mid 1980s the device was the first commercial product to use this method, although it had been proposed in the 1960s and prototyped in the late '70s.
Жұмыс істеу теориясы
Model 700 аналогты аудионы цифрлық деректерге "Companded Predictive Delta Modulation" немесе "CPDM" деп аталатын (екісі де сауда белгісі) дельта сигма модуляциясының түрін пайдалана отырып түрлендірді. Дәстүрлі, бір интегралды delta sigma ADC-де кіріс сигналының кернеуі интегралдың шығысымен салыстырылады. Егер кіріс сигналы интегратордың шығысынан жоғары болса, 1 белгісі жазылады және интеграторға белгілі бір мөлшерде көбейту командасы беріледі. Әрбір сағаттық циклда салыстыру интегратордың шығысы кіріс кернеуінен асып кеткенше қайталанады (және тағы бір 1 тіркеледі), бұл кезде 0 тіркеледі және интеграторға азайту айтылады. Осылайша интегратор кіріс сигналын мүмкіндігінше жақын ұстауға тырысады. Тұрақты кернеу сигналымен қоректенген кезде (немесе кіру толық жойылған кезде) шығыс "бос" болады және ауыспалы 1 және 0 ағынын шығарады. Осы ағысты тыңдаған декодер кішкентай синусоидты немесе үшбұрышты толқын шығысын шығарады, тіпті дұрыс шығыс тегіс болуы керек болса да: бұл кванттау қателігінің бір түрі. 700 модельінің классикалық дельта-сигма модуляциясынан айырмашылығы - оның бір интеграторды салыстырғыштардың күрделі жүйесімен және жоғары реттік сызықтық болжау сүзгілерімен ауыстыруы. Бұл кванттау қателігін азайту үшін жасалды және бұрын жазылған ақпаратқа негізделген кодтаушының тиімді "қадам өлшемін" өзгерту арқылы жүзеге асырылады. (Осылайша өлтіру деңгейін арттыру немесе азайту). Жүйеде сондай-ақ екі аналогты алдын ала өңдеу сатысы бар, олар енші сигналдарды амплитудалық және жиілік доменінде сығымдайды, осылайша кодтаушының мүмкіндіктеріне жақын болады. Бұл сығылу бұрын кодталған сигналға негізделген адаптивті түрде жасалады және кодтау аяғында кері бұрылады.
The Model 700 converted analog audio into digital data using a type of delta sigma modulation, called "Companded Predictive Delta Modulation," or "CPDM" (both trademarked). In a traditional, single integrated delta sigma ADC, the voltage of an input signal is compared to the output of an integrator. If the input signal is higher than the integrator's output, a 1 is recorded, and the integrator is given a command to increase by a certain amount. On each clock cycle, the comparison is repeated (and another 1 is recorded) until the integrator's output exceeds the input voltage, at which point a 0 is recorded and the integrator is told to decrease. In this way, the integrator attempts to follow the input signal as closely as it can. When fed a constant voltage signal (or when the input is removed completely), the output will "idle" and produce a stream of alternating 1s and 0s. A decoder listening to this stream would produce a small sinusoidal or triangle wave output, even though the correct output should be flat: this is a form of quantization error. Where the Model 700 differs from classical delta sigma modulation is in its replacement of the single integrator with a complex system of comparators and high order linear prediction filters. This was done in order to reduce the quantization error, and is accomplished in part by changing the effective "step size" of the encoder based on previously recorded information. (Thereby increasing or decreasing the slew rate.) The system also has two analog pre processing steps which compress the input signal in both the amplitude and frequency domain, in order to more closely match the abilities of the encoder. This compression is done adaptively based on previously encoded signal, and is reversed on the decoding end.