Израильдің Tavor TAR 21 автоматтары: Сипаттамасы мен қолданылуы

RPC Fort (of Ukraine)
| production date =
| variants = See Variants
| weight =
| part length = (Tavor TAR)
| cartridge = 5.56×45mm NATO is an Israeli bullpup assault rifle chambered in 5.56×45mm NATO, designed and produced by Israel Weapon Industries (IWI). It is part of the Tavor family of rifles, which have spawned many derivatives of the original design. The Tavor TAR 21 can also be mounted with the M203 grenade launcher, designated as the GTAR 21. A compact variant with a barrel is also available, designated as the CTAR 21. A designated marksman rifle variant with a folding under barrel bipod and Trijicon ACOG 4× magnification sight was also made but later phased out in favour for the Tavor TAR Flattop. Built around a long stroke piston system (as found in the M1 Garand and AK 47), the Tavor is designed to maximise reliability, durability, simplicity of design, and ease of maintenance, particularly under adverse battlefield conditions. In 2009, the Tavor X95 (also known as the Micro Tavor or MTAR) was selected by the Israel Defense Forces to gradually replace the M16 assault rifle and M4 carbine variants as the standard issued weapon of the Israeli infantry by the end of 2018. The first X95 bullpup rifles were issued to infantry units in 2013. The objective of the project was to create an assault rifle that was more reliable, durable, and easier to maintain than the M4A1 carbine, while also being better suited to close quarters combat and mechanized infantry roles. As a result, they hoped that the weapon would be officially adopted by the Israel Defense Forces. Due to the military's close quarters and mechanized infantry requirements, the project team selected a bullpup design that would allow the weapon to be compact while keeping a long barrel able to achieve ballistically favourable high muzzle velocities.

The Tavor prevailed over the M4A1 in a series of trials conducted during 2001 and 2002 by the Israel Defense Force. Qualities tested included Mean Rounds Between Failures (MRBF), reliability, ergonomics during long marches, and ease of maintenance. Issues with fine sand entering the Tavor TAR's chamber, which were identified over the two years of testing, were rectified by numerous small adjustments. A number of other improvements and changes to the design were also made between 2001 and 2009. The Tavor CTAR 21 saw combat service in Operation Cast Lead, used by Givati Brigade and Golani Brigade, and the soldiers reported the Tavor bullpup assault rifles functioned flawlessly. In November 2009, the IDF announced that the Tavor X95 would become the standard infantry weapon of the IDF, with the addition of an integrated grenade launcher. A gradual changeover has begun in 2006 and expected completion among front line troops was to be by the end of 2018. In December 2012, the IDF announced that they would begin equipping and training their new reserve forces with the Tavor TAR 21. The first Tavor X95s were issued to new recruits of a main IDF infantry brigade in 2013, replacing the M16. In 2014 the IDF announced that in the future (from as early as the end of 2014) some infantry units could start to be issued some numbers of an improved X95, which will have a longer barrel (instead of the original 33 cm barrel) and a lighter trigger pull. On 8 September, the IsraelDefense website reported that the IDF plans to continue acquiring the Micro Tavor, quoting from a report posted on the IDF's Hebrew website on 7 September regarding a multi year plan. The rifle is to be distributed to combat troops of relevant units in upcoming rounds of recruitment. The weapons division of the Ground Forces Command was quoted as saying that it's "very satisfied by its capabilities the rifle performs very well and has proven itself."

The Tavor is a bullpup assault rifle, capable of both semi automatic fire and fully automatic fire. Due to its bullpup design the receiver, bolt carrier group, and magazine are placed behind the pistol grip. This shortens the firearm's overall length without sacrificing barrel length. As a result, the Tavor provides carbine overall length, yet can achieve rifle muzzle velocities if equipped with a rifle length barrel.

The Tavor uses a non lubricated long stroke piston system, as found in the M1 Garand, IMI Galil, and the AK 47. An issue related to this is the original plastic cover on the unused ejection can allow gas to escape during the course of fire. Due to the bullpup design, this vents right under the shooter's face, causing issues such as inhaling ejection gases and the fouling of glasses and face with ejection debris. The issue is exacerbated when the weapon is suppressed. This has been addressed by various non factory solutions which increase sealing of the unused port. Its ambidextrous fire mode selector above the pistol grip has a semi automatic mode and a fully automatic mode. The Tavor features a self contained, drop in trigger group so that the trigger group can be changed or replaced without the use of additional tools.

The Tavor is primarily chambered in 5.56×45mm NATO and uses STANAG magazines, conversion kits for 9×19mm Parabellum and 5.45×39mm calibre are also available. The IDF uses both M193 and M855 5.56×45mm rounds. M193 rounds are used by regular infantrymen for better terminal effects at shorter distances, while the heavier M855 is used by sharpshooters. This is a request of modern armies, as it helps to allow soldiers to know when their magazine empties and to reduce reloading times during combat while also not requiring manual action cycling after.

The Tavor barrels are made from CrMoV steel and cold hammer forged (CHF) on the premises of the IWI factory in Ramat HaSharon. The TAR 21 barrel is 18 inches (457 mm) in length and is chrome lined for durability and corrosion resistance. The barrel features 6 grooves in a 1 in 7 inch (178 mm) twist, or 32 calibres right hand twist rate. The barrel is fitted with a 'birdcage' style flash suppressor, which can be fully disassembled without the need for additional tools. The Tavor is designed to be easily field stripped, without the need for any additional tools. It is waterproofed and its internal mechanism is sealed from outside elements, so that it can pass over the beach requirements.

IWI produces the Tavor TAR 21 in different variations as outlined below. With the use of a conversion kit, the X95 can be converted from a 5.56 mm assault rifle to a 9 mm submachine gun. A suppressor can also be added to the weapon, as part of the 9 mm conversion kit. A grenade launcher can also be attached to the X95.

The IWI Tavor 7 is derived from the Tavor TAR. Essentially a battle rifle, chambered in 7.62×51 mm NATO. It is fully ambidextrous, features a 432 mm (17 in) barrel with a 730 mm (28.7 in) overall length. and a 508 mm (20 in) barrel with an 806 mm (31.7 in) overall length.

An Indian made version of the TAR, which was not adopted and it was made with a few prototypes from Ordnance Factory Board. Based on the Micro Tavor, it would be chambered in 5.56×30mm MINSAS, 5.56 NATO and 9x19mm.

Ukraine purchased a license for Tavors to be manufactured by Ukrainian firearm manufacturer RPC Fort. As of March 2021, Fort is no longer marketing them. Fort 221 – Ukrainian locally produced version of the CTAR 21 in 5.45×39 mm.

A significant aftermarket of spare and replacement parts has developed around the Tavor rifle family, including the development of match grade accurizing triggers for the bullpup rifle that are produced by manufacturers such as Geissele Automatics and double stage trigger pack TAV D from Shooting Sight. Shlomi Sabag, Deputy CEO of IWI, says that one of the indicators of the success of the rifle in the shooting sports or civilian market is the fact that "an aftermarket of products associated with the Tavor bullpup rifle, like triggers, has evolved very quickly". Shooting Illustrated magazine named the Tavor X95 as its 2017 Rifle of the Year.