«Яростный Бык»: Стальные американские горки в Six Flags Great America

Steel roller coaster

Raging Bull is a steel roller coaster located at Six Flags Great America in Gurnee, Illinois. Designed by Werner Stengel and manufactured by Bolliger & Mabillard (B&M), the ride opened to the public on May 1, 1999. It features a 208 feet (63 m) first drop, a maximum speed of , and a track length of over 5000. feet (1524 m). It was the second B&M Hyper Coaster model to open in the United States, closely following the opening of Apollo's Chariot at Busch Gardens Williamsburg.

On October 21, 1998, Six Flags Great America announced that they would be adding Raging Bull for the 1999 season. It would be located in the Southwest Territory section next to Viper. The park hired Bolliger & Mabillard to build a brand new hyper coaster. Construction on Raging Bull began in November 1998 and was completed by the following spring. It opened to the public on May 1, 1999. A media day was held two days earlier on April 29. In 2008, Raging Bull was repainted. The following year, the ride received a new entrance sign depicting a more aggressive bull. On June 15, 2016, Six Flags announced that Virtual Reality (VR) would be added to the ride later in the year. The VR experience didn't last long on the rides that offered it across the Six Flags chain due to slower load times and longer lines, as well as additional staffing to distribute and sanitize each headset.

Raging Bull is located in the Southwest Territory section of the park, situated between Viper and the giant helix on American Eagle. This site had been previously occupied by Rolling Thunder, a bobsled roller coaster that operated at the park from 1989 to 1995. Raging Bull's station is designed to have a run down appearance. The track is painted orange with unpainted rails and wine colored supports.

As the train exits the station, it makes a left turn and a small dip before ascending the lift hill. At the 202 feet (62 m), the train traverses a pre drop into a brief straight section of track, before making a 208 feet (63 m) at 65° into a tunnel, reaching speeds of up to The track then ascends into a hammerhead turn to the right. After the turnaround is a parabolic hill with a trim brake on the uphill side. This is followed by another hill that banks left over the station area, a dip under the lift hill, and another hammerhead turn to the left. The train then makes a right hand uphill turn into a mid course brake run. Dropping off the mid course brakes, the track passes the on ride camera. This is followed by an airtime hill and a three quarter turn to the right, wrapping around the first drop and diving into a figure eight turn. Exiting the turn, the train rises uphill and enters the final brake run before returning to the station.