Лиссажу қисықтары: параметрлік теңдеулер мен геометриялық үлгілер

Mathematical curve outputted from a specific pair of parametric equations

A Lissajous curve '/l//ɪ//s//ə//ʒ//uː/, also known as Lissajous figure or Bowditch curve '/b//aʊ//d//ɪ//tʃ/, is the graph of a system of parametric equations

which describe the superposition of two perpendicular oscillations in x and y directions of different angular frequency (a and b). The resulting family of curves was investigated by Nathaniel Bowditch in 1815, and later in more detail in 1857 by Jules Antoine Lissajous (for whom it has been named). Such motions may be considered as a particular kind of complex harmonic motion. The appearance of the figure is sensitive to the ratio For a ratio of 1, when the frequencies match a=b, the figure is an ellipse, with special cases including circles (1=A = B, radians) and lines (1=δ = 0). A small change to one of the frequencies will mean the x oscillation after one cycle will be slightly out of synchronization with the y motion and so the ellipse will fail to close and trace a curve slightly adjacent during the next orbit showing as a precession of the ellipse. The pattern closes if the frequencies are whole number ratios i. e. is rational. Another simple Lissajous figure is the parabola (, ). Again a small shift of one frequency from the ratio 2 will result in the trace not closing but performing multiple loops successively shifted only closing if the ratio is rational as before. A complex dense pattern may form see below. The visual form of such curves is often suggestive of a three dimensional knot, and indeed many kinds of knots, including those known as Lissajous knots, project to the plane as Lissajous figures. Visually, the ratio determines the number of "lobes" of the figure. For example, a ratio of or produces a figure with three major lobes (see image). Similarly, a ratio of produces a figure with five horizontal lobes and four vertical lobes. Rational ratios produce closed (connected) or "still" figures, while irrational ratios produce figures that appear to rotate. The ratio determines the relative width to height ratio of the curve. For example, a ratio of produces a figure that is twice as wide as it is high. Finally, the value of δ determines the apparent "rotation" angle of the figure, viewed as if it were actually a three dimensional curve. For example, 1=δ = 0 produces x and y components that are exactly in phase, so the resulting figure appears as an apparent three dimensional figure viewed from straight on (0°). In contrast, any non zero δ produces a figure that appears to be rotated, either as a left–right or an up–down rotation (depending on the ratio ). Lissajous figures where 1=a = 1, 1=b = N (N is a natural number) and

are Chebyshev polynomials of the first kind of degree N. This property is exploited to produce a set of points, called Padua points, at which a function may be sampled in order to compute either a bivariate interpolation or quadrature of the function over the domain [−1,1] × [−1,1]. The relation of some Lissajous curves to Chebyshev polynomials is clearer to understand if the Lissajous curve which generates each of them is expressed using cosine functions rather than sine functions.

The animation shows the curve adaptation with continuously increasing fraction from 0 to 1 in steps of 0.01 (1=δ = 0). Below are examples of Lissajous figures with an odd natural number a, an even natural number b, and .

Prior to modern electronic equipment, Lissajous curves could be generated mechanically by means of a harmonograph.

Lissajous curves can also be generated using an oscilloscope (as illustrated). An octopus circuit can be used to demonstrate the waveform images on an oscilloscope. Two phase shifted sinusoid inputs are applied to the oscilloscope in X Y mode and the phase relationship between the signals is presented as a Lissajous figure. In the professional audio world, this method is used for realtime analysis of the phase relationship between the left and right channels of a stereo audio signal. On larger, more sophisticated audio mixing consoles an oscilloscope may be built in for this purpose. On an oscilloscope, we suppose x is CH1 and y is CH2, A is the amplitude of CH1 and B is the amplitude of CH2, a is the frequency of CH1 and b is the frequency of CH2, so is the ratio of frequencies of the two channels, and δ is the phase shift of CH1. A purely mechanical application of a Lissajous curve with 1=a = 1, 1=b = 2 is in the driving mechanism of the Mars Light type of oscillating beam lamps popular with railroads in the mid 1900s. The beam in some versions traces out a lopsided figure 8 pattern on its side.

When the input to an LTI system is sinusoidal, the output is sinusoidal with the same frequency, but it may have a different amplitude and some phase shift. Using an oscilloscope that can plot one signal against another (as opposed to one signal against time) to plot the output of an LTI system against the input to the LTI system produces an ellipse that is a Lissajous figure for the special case of 1= a = b. The aspect ratio of the resulting ellipse is a function of the phase shift between the input and output, with an aspect ratio of 1 (perfect circle) corresponding to a phase shift of ±90° and an aspect ratio of ∞ (a line) corresponding to a phase shift of 0° or 180°. The figure below summarizes how the Lissajous figure changes over different phase shifts. The phase shifts are all negative so that delay semantics can be used with a causal LTI system (note that −270° is equivalent to +90°). The arrows show the direction of rotation of the Lissajous figure.

A Lissajous curve is used in experimental tests to determine if a device may be properly categorized as a memristor. It is also used to compare two different electrical signals: a known reference signal and a signal to be tested.

Lissajous figures were sometimes displayed on oscilloscopes meant to simulate high tech equipment in science fiction TV shows and movies in the 1960s and 1970s. The title sequence by John Whitney for Alfred Hitchcock's 1958 feature film Vertigo is based on Lissajous figures.

The Dadaist artist Max Ernst painted Lissajous figures directly by swinging a punctured bucket of paint over a canvas.

Lissajous curves have been used in the past to graphically represent musical intervals through the use of the Harmonograph, a devise that consists of pendulums oscillating at different frequency ratios. Because different tuning systems employ different frequency ratios to define intervals, these can be compared using Lissajous curves to observe their differences. Therefore, Lissajous curves have applications in music education by graphically representing differences between intervals and among tuning systems.