Құлақ тесіп тарту құралы және оның қауіптері

An ear piercing instrument (commonly referred to as a piercing gun or an ear piercing gun) is a device designed to pierce earlobes by driving a pointed starter stud through the lobe. Piercing guns are typically used for ear piercing in mall jewelry shops, beauty salons, pharmacies, and doctors' offices. Piercing guns have been widely criticized as dangerous among professional body piercers. The use of older designs of piercing gun can possibly carry an increased risk of disease transmission, as compared to methods used by professional piercers.

The older designs of ear piercing gun, which came widely into use in the 1970s but are still in widespread use (e. g., "Studex Universal") employ a spring that stores potential energy when the instrument is "cocked" ready for piercing by pulling back a plunger. The starter studs and friction clasps that are used with these instruments typically come in pairs, in sealed, sterilized packages. The studs have a pointed tip designed to pierce the earlobe rapidly when the trigger mechanism is released, and a "shoulder" to hold the clasp in place, and to maintain appropriate spacing between the clasp and the stud head, such that the earlobe is not squeezed while healing. The studs are slightly thicker, 16 gauge, and are made of surgical steel, 24 karat gold plated steel, 14 karat gold, or titanium. To conduct the ear piercing, the instrument is first cocked by drawing the plunger back. The piercer inserts the head of one of the pair of starter studs selected by the client into an adapter in the barrel in the body of the instrument, and the clasp is slid into the clasp retainer at the front of the instrument. The piercer then positions the client's earlobe between the point of the stud and the clasp retainer, and squeezes the instrument closed such that the tip of the stud is aligned with the mark where the piercing is to be placed, and to hold the earlobe in place during the piercing. When the alignment of the stud is correct, the piercer releases the trigger, and the force of the spring causes the instrument to fire with considerable pressure, snapping the plunger forward, pushing the point of the stud rapidly through the earlobe, and engaging it with the clasp behind the earlobe, completing the ear piercing. As necessary, the procedure is repeated to pierce the other ear. The older designs of ear piercing gun cannot easily be sterilized, which led to the development of more modern systems that employ single use, disposable cartridges.

Most newer models of piercing guns use a disposable cartridge, sometimes called a "cassette". With these models, the stud holder and clasp holder are fully disposable. In some parts of the world, this modification is either specifically required (e. g., in Scotland) or implied by Health and Safety legislation.

In certain more modern designs, such as Inverness 2000 and Studex System 75, the instrument operates via hand pressure, whereby the piercer squeezes the instrument closed to push the stud rapidly through the ear, instead of via the force of a spring when a trigger is released. These models work with piercing studs housed in disposable, single use cassettes, which are loaded into the instrument without the operator touching either the studs or the clasps; sufficient force to pierce the ear rapidly is attained when the stud breaks apart its plastic mount inside the cassette. The ease of operation, the greater variety of stud designs (different materials, jewels, settings, and shapes), and the relative painlessness of the piercing, and the absence of a sudden "snap" facilitated by such instruments is likely to have contributed to the widespread increase in popularity in ear piercing since the late 20th century, and in trends such as multiple piercing, piercing among both sexes and in younger children, and the abandonment of the perception of ear piercing as an ordeal. Another design for a hand pressure ear piercing instrument is Coren, which comprises a small U shaped plastic holder pre loaded with a standard 16 gauge ear piercing stud in one arm of the device and the clasp in the other. To pierce the ear, the operator closes the instrument around the earlobe, aligning the point of the stud with the mark for the desired placement of the piercing, and squeezes a plastic plunger with sufficient pressure to break two plastic flanges on either side of the plunger, forcing the stud rapidly through the earlobe, and engaging the stud with the clasp behind the earlobe. The used instrument is then discarded.

Ear piercing "guns" have been widely criticized in the body piercing community, which advocates piercing with needles. Shannon Larratt, editor and publisher of BME and a vocal critic of the piercing gun, penned an essay titled Piercing guns are blasphemy!, where he described the piercing gun as an inherently flawed, dangerous instrument that should never be used. Larratt also printed T shirts which featured an image of a piercing gun with a red circle and line through it, to mean No Piercing Guns. BME also published an article titled Do Piercing Guns Suck?.

While they are sometimes used for this purpose, ear piercing guns were not originally designed to pierce through the cartilage of the upper ear, or to pierce any part of the body other than the earlobe. Some U. S. states and some European countries have banned piercing guns for use on ear cartilage and nostrils. Improper use of ear piercing instruments on areas of the body not intended for their use can lead to problems with healing and placement. Ear piercing studs can be too short or wrongly shaped for the tissue, especially for oral piercings, and can lead to problems with "embedding" in which the wound effectively heals over it. In some cases this has necessitated surgical removal of the stud and can lead to abscesses, infection and scarring. For other body piercings, the gauge of the studs used by piercing guns is too narrow and can lead to tearing and other trauma that expose the body to infection and can cause permanent scarring.