Palm Multi Connector (Athena): Қуат, аудио, дерек интерфейсі. LifeDrive, Treo, Palm TX модельдерінде қолданылады. Піндер, функциялары, қосылымдар туралы толық ақпарат.
The connector is used by: LifeDrive, Tungsten E2, Tungsten T5, Treo 650, Treo 680, Treo 700p, Treo 750, Treo 755p, Palm TX, Palm Centro.
Ерекшеліктер
Қосылыс екі бөлікке бөлінеді: ұзын бөлігінде оңнан солға қарай нөмірленген он үш тірек бар (5-тен 17-ге дейін); қысқа бөлігінде үш тірек бар, сол жақта (3), үстінде (2) және оң жақта (1). Кабельдік қалқан жалғауыштар (4,18) он үш тіректің екі жағында орналасқан.
The connector is divided in two sections: the longer one has thirteen pins numbered from right to left (5 to 17); the shorter one has three pins, on the left (3), top (2) and right (1). The cable shield connectors (4,18) are located on each side of the thirteen pins. Pin # on device/Multiconnector Pin # on charger/adapter connector Pin# on data/cable connector Name Direction with respect to the device Default state with no attachment Function 1 1 VDOCK Power CHRG IN DC charging voltage, 5 V 2 2 ADAPTER ID Input VCC, weak pull up Adapter identification 3 3 VDOCK RTN Power GND DC charging return 4 1 SHIELD Shield GND Cable shield 5 2 VBUS Power VBUS IN USB charging voltage, 5 V typical, 500 mA max 6 3 USB DP Input/Output Floating USB Data + 7 4 USB DN Input/Output Floating USB Data 8 5 DGND Power GND Digital ground, and VBUS return 9 6 Reserved NA NA Do not connect 10 7 TXD Input/output VCC, weak pull up Transmit data, 3.3 V logic level 11 8 RXD Input VCC, weak pull up Receive data, 3.3 V logic level 12 9 HOTSYNC Input VCC, weak pull up HotSync input, active low, pulled up on device 13 10 POWER OUT Output High impedance Power output to external devices 14 11 SPKR L Analog output AC coupled Speaker output left 15 12 SPKR R Analog output AC coupled Speaker output right 16 13 AGND Power GND Analog ground 17 14 MIC IN Analog input DC coupled Microphone input 18 15 SHIELD Shield GND Cable shield
Pins 10 and 11 have TTL levels and cannot be directly connected to the RS 232 port.
Тірек нөмірі құрылғыда/Мультиқосылыста Тірек нөмірі зарядтағышта/адаптерде Тірек нөмірі дерек/кабельде Атауы Құрылғыға қатысты бағыты Қосылмағандағы әдепкі күйі Функциясы
1 1 VDOCK Қуат CHRG IN DC зарядтау кернеуі, 5 В
2 2 ADAPTER ID Кіріс VCC, әлсіз тартымдылық Адаптерді тану
3 3 VDOCK RTN Қуат GND DC зарядтау кернеуіне оралу
4 1 SHIELD Қалқан GND Кабельдік қалқан
5 2 VBUS Қуат VBUS IN USB зарядтау кернеуі, әдетте 5 В, максимум 500 мА
6 3 USB DP Кіріс/Шығыс Қалқыма USB дерегі +
7 4 USB DN Кіріс/Шығыс Қалқыма USB дерегі -
8 5 DGND Қуат GND Цифрлік жер және VBUS кернеуіне оралу
9 6 Резервтелген NA NA Қоспаңыз
10 7 TXD Кіріс/Шығыс VCC, әлсіз тартымдылық Дерек жіберу, 3.3 В логикалық деңгей
11 8 RXD Кіріс VCC, әлсіз тартымдылық Дерек қабылдау, 3.3 В логикалық деңгей
12 9 HOTSYNC Кіріс VCC, әлсіз тартымдылық HotSync кірісі, белсенді төмен, құрылғыда тартылған
13 10 POWER OUT Шығыс Жоғары кедергі Сыртқы құрылғыларға қуат шығару
14 11 SPKR L Аналогтық шығыс AC байланысты Дыбыс шығару сол
15 12 SPKR R Аналогтық шығыс AC байланысты Дыбыс шығару оң
16 13 AGND Қуат GND Аналогтық жер
17 14 MIC IN Аналогтық кіріс DC байланысты Микрофон кірісі
18 15 SHIELD Қалқан GND Кабельдік қалқан
The connector is divided in two sections: the longer one has thirteen pins numbered from right to left (5 to 17); the shorter one has three pins, on the left (3), top (2) and right (1). The cable shield connectors (4,18) are located on each side of the thirteen pins. Pin # on device/Multiconnector Pin # on charger/adapter connector Pin# on data/cable connector Name Direction with respect to the device Default state with no attachment Function 1 1 VDOCK Power CHRG IN DC charging voltage, 5 V 2 2 ADAPTER ID Input VCC, weak pull up Adapter identification 3 3 VDOCK RTN Power GND DC charging return 4 1 SHIELD Shield GND Cable shield 5 2 VBUS Power VBUS IN USB charging voltage, 5 V typical, 500 mA max 6 3 USB DP Input/Output Floating USB Data + 7 4 USB DN Input/Output Floating USB Data 8 5 DGND Power GND Digital ground, and VBUS return 9 6 Reserved NA NA Do not connect 10 7 TXD Input/output VCC, weak pull up Transmit data, 3.3 V logic level 11 8 RXD Input VCC, weak pull up Receive data, 3.3 V logic level 12 9 HOTSYNC Input VCC, weak pull up HotSync input, active low, pulled up on device 13 10 POWER OUT Output High impedance Power output to external devices 14 11 SPKR L Analog output AC coupled Speaker output left 15 12 SPKR R Analog output AC coupled Speaker output right 16 13 AGND Power GND Analog ground 17 14 MIC IN Analog input DC coupled Microphone input 18 15 SHIELD Shield GND Cable shield
Pins 10 and 11 have TTL levels and cannot be directly connected to the RS 232 port.
10 және 11 тіректер TTL деңгейлеріне ие және тікелей RS 232 портына қосылуы мүмкін емес.
The connector is divided in two sections: the longer one has thirteen pins numbered from right to left (5 to 17); the shorter one has three pins, on the left (3), top (2) and right (1). The cable shield connectors (4,18) are located on each side of the thirteen pins. Pin # on device/Multiconnector Pin # on charger/adapter connector Pin# on data/cable connector Name Direction with respect to the device Default state with no attachment Function 1 1 VDOCK Power CHRG IN DC charging voltage, 5 V 2 2 ADAPTER ID Input VCC, weak pull up Adapter identification 3 3 VDOCK RTN Power GND DC charging return 4 1 SHIELD Shield GND Cable shield 5 2 VBUS Power VBUS IN USB charging voltage, 5 V typical, 500 mA max 6 3 USB DP Input/Output Floating USB Data + 7 4 USB DN Input/Output Floating USB Data 8 5 DGND Power GND Digital ground, and VBUS return 9 6 Reserved NA NA Do not connect 10 7 TXD Input/output VCC, weak pull up Transmit data, 3.3 V logic level 11 8 RXD Input VCC, weak pull up Receive data, 3.3 V logic level 12 9 HOTSYNC Input VCC, weak pull up HotSync input, active low, pulled up on device 13 10 POWER OUT Output High impedance Power output to external devices 14 11 SPKR L Analog output AC coupled Speaker output left 15 12 SPKR R Analog output AC coupled Speaker output right 16 13 AGND Power GND Analog ground 17 14 MIC IN Analog input DC coupled Microphone input 18 15 SHIELD Shield GND Cable shield
Pins 10 and 11 have TTL levels and cannot be directly connected to the RS 232 port.
Пікірлер
Multi Connector бұрынғы Universal Connector сияқты қосылыстарды білген пайдаланушылардан сындарға ұшырады. Пайдаланушылар Universal Connector кабельдерін, тіректерін, пернетақталарын, ұңғыларын және қосымша құрылғыларын алмастыру қажеттігіне наразы болды, себебі олар енді үйлесімді емес. Тағы бір сын – бұл қосылыстың қолдануы қиын, шығаруы ауыр және сынғыш сезіледі. Treo құрылғысын зарядтау үшін VDOCK-ке +5 В, ал VDOCK RTN-ге 0 В (теріс) қосу жеткілікті.
The Multi Connector has received criticism from users who were familiar with previous connectors such as the Universal Connector. Users have been frustrated with the requirement to replace their Universal Connector cables, cradles, keyboards, sleds, and attachments as they have become incompatible. Another criticism is that the connector is fiddly, harder to remove and feels fragile. All that is needed to charge the Treo is to connect +5 V to VDOCK and 0 V (negative) to VDOCK RTN.