Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
7,62×45 мм (C.I.P. 7,62 × 45 деп белгіленген) – Чехословакияда жасалған жиексіз, мойын қысқан аралық мылтық патроны. Ол чех Vz. 52 мылтығымен, Vz. 52 жеңіл пулеметімен және ZB 53 пулеметімен атылады. Кейін Чехия стандартты 7,62×39 мм Варшава шартының патронына көшкен кезде бұл патрон қолданудан шығарылды. Оның бастапқы жылдамдығы мен бастапқы энергиясы 7,62×39 мм патронынан сәл жоғары, ал тиектері бірдей болғанда .30-30 Winchester патронымен шамалас.
Intermediate rifle cartridge
The 7.62×45mm (designated as the 7,62 × 45 by the C. I. P.) is a rimless bottlenecked intermediate rifle cartridge developed in Czechoslovakia. It is fired by the Czech Vz. 52 rifle, Vz. 52 light machine gun, and ZB 53 machine gun. The cartridge was later dropped from use when the Czech converted to the standard 7.62×39mm Warsaw Pact cartridge of the Soviet Union. Its muzzle velocity and muzzle energy are slightly higher than that of the 7.62×39mm cartridge, and is on par with the .30 30 Winchester cartridge, with equivalent projectiles.
Өлшемі ұқсас
7.62x45 мм патроны шамамен АҚШ-та кең таралған 5.56 НАТО және .223 патрондарымен бірдей жалпы ұзындықта болады, сондай-ақ 6.5 мм Grendel патроны үшін жасалған AR үлгі журналдарына сыйып (өлшемдері ұқсас корпустары бар патрондар үшін де) кіреді. Чехияның Vz.52 карабинінің ұңғысын ауыстыру немесе тіпті "көмескілеу" арқылы 6.5 мм Grendel патронымен атуға мүмкіндік беру – зауыттық, оқтұмсығы бар және қайта зарядталатын үйлесімді патронды қамтамасыз ететін тиімді нұсқа. 6.5 Grendel бастапқыда AR15 класындағы қарулар үшін жобаланған, сондықтан оның қуат деңгейі (қысымы) осы кластың шектерінде. Осыған байланысты, 6.5 Grendel үшін C.I.P. тізіміндегі қысым деңгейлері 7.62×45 үшін C.I.P. тізіміндегі деңгейлерден төмен (C.I.P.: 430.00 МПа (62,366 psi)). Егер түпнұсқа жабдықталған журналын пайдалану жоспарланса, Vz.52 мылтығын қайта жасау үшін .250 Savage де қолайлы нұсқа болар еді, мұнда дайын патронның жалпы ұзындығына (OAL) назар аудару маңызды.
The 7.62x45mm cartridge is approximately of the same overall length as the 5.56 NATO and .223 cartridges common in the United States, and will "fit" into AR pattern magazines designed for the 6.5mm Grendel cartridge (as well as those for cartridges with dimensionally close case bodies). Re barreling, or even "Sleeving" the barrel of the Czech Vz.52 carbine in order to shoot 6.5mm Grendel is a viable option that provides a common factory / boxer primed and reloadable compatible cartridge. 6.5 Grendel was originally designed for the AR15 class of firearms, and therefore has power level (pressure) ratings that are within the limits of that class. As such, the C. I. P. listed pressure levels for the 6.5 Grendel are lower than those listed by the C. I. P. for the 7.62×45 (C. I. P.: 430.00 MPa (62,366 psi)). The .250 Savage would also be another reasonable option for rebarreling the Vz.52 rifle, if intending to use the OEM magazine attention to the Overall Length (OAL) of the finished cartridge will be important.
Қайта жүктеу
C.I.P. снарядтың диаметрін 7.83 мм (.311 .312 калибр) деп көрсетеді, бұл британдық .303 патрондарымен және советтік ".30 калибрлі" 7.62x39 сияқты оқтардың диаметрімен бірдей. .308 (7.62 мм) өлшемді оқтар қолдануға жарамды және қауіпсіз, бірақ ең жоғары дәлдікке ие болмауы мүмкін. Осы патронда қайта зарядтау АҚШ-та қиындық тудырады. Боксерлік капсулді корпус 6.5 мм Carcano латуньын қайта өлшемдеу және қысқарту арқылы оңай жасауға болады, бірақ оны алу қиын. Тағы бір жол – .220 Swift патронын пайдалану, бірақ бұл ретте өлшемді өзгертумен және қысқартумен қатар, дөңгелектің жиегін токарлық станокта төмендету және тереңдетілген экстрактор ойықтарын кесу қажет. .300 Savage, 30 калибрлі, қайта зарядталатын американдық Боксерлік капсулге ең жақын өлшемді болып саналады. .300 Savage корпусының диаметрі түбінде <12 мм (11.3 мм-ге қарсы), иығында <11.35 мм және ұзындығы 47.52 мм-де 2.5 мм-ден сәл артық. .300 Savage камералық ремер Vz.52 камерасын дұрыс .300 Savage патронының корпусының өлшемдеріне дейін, терең және кең иығымен аша алады, сондай-ақ OAL-ды дүңгіршеге сәйкес келтіру қажет. 7×46 мм патроны 5.56 мм және 7.62 мм НАТО патрондарын алмастыру үшін жасалған. Ол аз кері соққыға ие, сондықтан карабиндерде қолдануға болады, бірақ автоматтар мен белгіленген снайперлік мылтықтарда қолдануға жеткілікті ұзын қашықтыққа ие. Оның жалпы ұзындығы AR 15-тен үлкен, бірақ AR 10-нан кіші болуы үшін оңтайландырылған.
The C. I. P. lists the projectile diameter as 7.83mm (.311 .312 caliber) which is the same bullet diameter as the British .303 cartridges and Soviet ".30 caliber" rounds like 7.62x39. .308 (7.62mm) size bullets are safe and usable but would not necessarily be the most accurate. Reloading in this chambering is a nuisance in the United States. Boxer primed cases can be easily formed via resizing and trimming 6.5mm Carcano brass, but these are difficult to obtain. Another route is to use the .220 Swift cartridge, but along with resizing and trimming, this also requires turning the rims down on a lathe and cutting deeper extractor grooves. .300 Savage is probably the closest in size for a relatively available American Boxer primed reloadable .30 caliber cartridge. the .300 Savage case is <12mm in diameter at the base (vs 11.3mm), <11.35mm at the shoulder, and longer by just over 2.5mm at 47.52mm. A .300 Savage chamber reamer can open up the Vz.52 chamber to the correct .300 Savage cartridge case body dimensions with the deeper and wider shoulder, OAL would have to be adjusted to fit the magazine as well. The 7×46mm is designed to replace both the 5.56mm and 7.62mm NATO cartridges. It is low recoil and so can be used from carbines, but has long enough range to be used in machine guns and designated marksmen rifles. Its overall length has been optimized so that guns chambering it would be bigger than AR 15s but smaller than AR 10s.