Ethernet in the first mile

Use of Ethernet between a telecommunications company and a customer's premises
Ethernet in the first mile (EFM) refers to using one of the Ethernet family of computer network technologies between a telecommunications company and a customer's premises. From the customer's point of view, it is their first mile, although from the access network's point of view it is known as the last mile. A working group of the Institute of Electrical and Electronics Engineers (IEEE) produced the standards known as IEEE 802.3ah 2004, which were later included in the overall standard IEEE 802.3 2008. EFM is often used in active optical network deployments. Although it is often used for businesses, it can also be known as Ethernet to the home (ETTH). One family of standards known as Ethernet passive optical network (EPON) uses a passive optical network.

With wide, metro, and local area networks using various forms of Ethernet, the goal was to eliminate non native transport such as Ethernet over Asynchronous Transfer Mode (ATM) from access networks. One early effort was the EtherLoop technology invented at Nortel Networks in 1996, and then spun off into the company Elastic Networks in 1998. Its principal inventor was Jack Terry. The hope was to combine the packet based nature of Ethernet with the ability of digital subscriber line (DSL) technology to work over existing telephone access wires. The name comes from local loop, which traditionally describes the wires from a telephone company office to a subscriber. The protocol was half duplex with control from the provider side of the loop. It adapted to line conditions with a peak of 10 Mbit/s advertised, but 4 6 Mbit/s more typical, at a distance of about 12000 feet (3658 m). Symbol rates were 1 megabaud or 1.67 megabaud, with 2, 4, or 6 bits per symbol. The EtherLoop technology was eventually purchased by Paradyne Networks in 2002, which was in turn purchased by Zhone Technologies in 2005. Another effort was the concept promoted by Michael Silverton of using Ethernet variants that used fiber optic communication to residential as well as business customers. This was an example of what has become known as fiber to the home (FTTH). The Fiberhood Networks company provided this service from 1999 to 2001. Some early products around the year 2000, were marketed as 10BaseS by Infineon Technologies, although they did not technically use baseband signalling, but rather passband as in very high bit rate digital subscriber line (VDSL) technology. A patent was filed in 1997 by Peleg Shimon, Porat Boaz, Noam Alroy, Rubinstain Avinoam and Sfadya Yackow. Long Reach Ethernet was the product name used by Cisco Systems starting in 2001. It supported modes of 5 Mbit/s, 10 Mbit/s, and 15 Mbit/s depending on distance. In October 2000 Howard Frazier issued a call for interest on "Ethernet in the Last Mile". At the November 2000 meeting, IEEE 802.3 created the "Ethernet in the First Mile" study group, and on July 16, 2001, the 802.3ah working group. In parallel participating vendors formed the Ethernet in the First Mile Alliance (EFMA) in December 2001 to promote Ethernet subscriber access technology and support the IEEE standard efforts. At an early meeting, the EtherLoop technology was called 100BASE CU and another technology called EoVDSL for Ethernet over VDSL. The working group's EFM standard was approved on June 24, 2004, and published on September 7, 2004, as IEEE 802.3ah 2004. In 2005, it was included into the base IEEE 802.3 standard. In 2005, the EFMA was absorbed by the Metro Ethernet Forum. In early 2006, work began on an even higher speed 10 gigabit/second Ethernet passive optical network (10G EPON) standard, ratified in 2009 as IEEE 802.3av. The work on the EPON was continued by the IEEE P802.3bk Extended EPON Task Force, formed in March 2012. The major goals for this Task Force included adding support for PX30, PX40, PRX40, and PR40 power budget classes to both 1G EPON and 10G EPON. The 802.3bk amendment was approved by the IEEE SA SB in August 2013 and published soon thereafter as the standard IEEE Std 802.3bk 2013. In November 2011, IEEE 802.3 began work on EPON Protocol over Coax (EPoC). On June 4, 2020, the IEEE approved IEEE 802.3ca which allows for symmetric or asymmetric operation with downstream speeds of 25 Gbit/s or 50 Gbit/s, and upstream speeds of 10 Gbit/s, 25 Gbit/s, or 50 Gbit/s over passive optical networks.

2BASE TL – defined in clauses 61 and 63. Full duplex long reach point to point link over voice grade copper wiring. 2BASE TL PHY can deliver a minimum of 2 Mbit/s and a maximum of 5.69 Mbit/s over distances of up to 2700 m (9,000 ft), using ITU T G.991.2 (G. SHDSL. bis) technology over a single copper pair. 10PASS TS – defined in clauses 61 and 62. Full duplex short reach point to point link over voice grade copper wiring. 10PASS TS PHY can deliver a minimum of 10 Mbit/s over distances of up to 750 m (2460 ft), using ITU G.993.1 (VDSL) technology over a single copper pair.

100BASE LX10 defined in clause 58, providing point to point 100 Mbit/s Ethernet links over a pair of single mode fibers up to at least 10 km. 100BASE BX10 defined in clause 58, providing point to point 100 Mbit/s Ethernet links over an individual single mode fiber up to at least 10 km. 1000BASE LX10 defined in clause 59, providing point to point 1000 Mbit/s Ethernet links over a pair of single mode fibers up to at least 10 km. 1000BASE BX10 defined in clause 59, providing point to point 1000 Mbit/s Ethernet links over an individual single mode fiber up to at least 10 km.

Fiber to the home can use a passive optical network. 1000BASE PX10 defined in Clause 60 (added by IEEE Std 802.3ah 2004), providing P2MP 1000 Mbit/s Ethernet links over PONs, at the distance of at least 10 km, at the split of at least 1:16. 1000BASE PX20 defined in Clause 60 (added by IEEE Std 802.3ah 2004), providing P2MP 1000 Mbit/s Ethernet links over PONs, at the distance of at least 20 km, at the split of at least 1:16. 1000BASE PX30 defined in Clause 60 (added by IEEE Std 802.3bk 2013), providing P2MP 1000 Mbit/s Ethernet links over PONs, at the distance of at least 20 km, at the split of at least 1:32. 1000BASE PX40 defined in Clause 60 (added by IEEE Std 802.3bk 2013), providing P2MP 1000 Mbit/s Ethernet links over PONs, at the distance of at least 20 km, at the split of at least 1:64. 10GBASE PR10 defined in Clause 91 (added by IEEE Std 802.3av 2009), providing P2MP 10 Gbit/s Ethernet links over PONs, at the distance of at least 10 km, at the split of at least 1:16. 10GBASE PR20 defined in Clause 91 (added by IEEE Std 802.3av 2009), providing P2MP 10 Gbit/s Ethernet links over PONs, at the distance of at least 20 km, at the split of at least 1:16. 10GBASE PR30 defined in Clause 91 (added by IEEE Std 802.3av 2009), providing P2MP 10 Gbit/s Ethernet links over PONs, at the distance of at least 20 km, at the split of at least 1:32. 10GBASE PR40 defined in Clause 60 (added by IEEE Std 802.3bk 2013), providing P2MP 10 Gbit/s Ethernet links over PONs, at the distance of at least 20 km, at the split of at least 1:64. 25GBASE and 50GBASE added by IEEE Std 802.3ca 2020, providing P2MP 25 Gbit/s Ethernet links over PONs, at the distance of at least 20 km, at the split of at least 1:32. 50 Gbit/s to a single end point is achieved by using two different wavelengths of light. Additionally clause 57 defines link level OA&M, including discovery, link monitoring, remote fault indication, loopbacks, and variable access.

2BASE TL is an IEEE 802.3 2008 Physical Layer (PHY) specification for a full duplex long reach point to point Ethernet link over voice grade copper wiring.

Unlike 10/100/1000 PHYs, providing a single rate of 10, 100, or 1000 Mbit/s, the 2BASE TL link rate can vary, depending on the copper media characteristics (such as length, wire diameter or gauge, number of pairs if the link is aggregated, amount of crosstalk between the pairs, etc. ), desired link parameters (such as desired SNR margin, Power Back Off, etc. ), and regional spectral limitations. 2BASE TL PHYs deliver a minimum of 2 Mbit/s over distances of up to , using ITU T G.991.2 (G. SHDSL. bis) technology over a single copper pair. These PHYs may also support an optional aggregation or bonding of multiple copper pairs, called PME Aggregation Function (PAF). For a single pair, the minimum possible link bitrate is 192 kbit/s (3 x 64 kbit/s) and the maximum bitrate is 5.7 Mbit/s (89 x 64 kbit/s). On a 0.5 mm wire with 3 dB noise margin and no spectral limitations, the max bitrate can be achieved over distances of up to At the maximum achievable bitrate is about 850 kbit/s. The throughput of a 2BASE TL link is lower than the link's bitrate by an average 5%, due to 64/65 octet encoding and PAF overhead; both factors depend on packet size.

10PASS TS is an IEEE 802.3 2008 Physical Layer (PHY) specification for a full duplex short reach point to point Ethernet link over voice grade copper wiring. 10PASS TS PHYs deliver a minimum of 10 Mbit/s over distances of up to , using ITU T G.993.1 (VDSL) technology over a single copper pair. These PHYs may also support an optional aggregation or bonding of multiple copper pairs, called PME Aggregation Function (PAF).

Unlike other Ethernet physical layers that provide a single rate such as 10, 100, or 1000 Mbit/s, the 10PASS TS link rate can vary, similar to 2BASE TL, depending on the copper channel characteristics, such as length, wire diameter (gauge), wiring quality, the number of pairs if the link is aggregated and other factors. VDSL is a short range technology designed to provide broadband over distances less than 1 km of voice grade copper twisted pair line, but connection data rates deteriorate quickly as the line distance increases. This has led to VDSL being referred to as a "fiber to the curb" technology, because it requires fiber backhaul to connect with a carrier network over greater distances. VDSL Ethernet in the first mile services using may be a useful way to standardise functionality on metro Ethernet networks, or potentially to distribute internet access services over voice grade wiring in multi dwelling unit buildings. However, VDSL2 has already proven to be a versatile and faster standard with greater reach than VDSL.