Соғыс даласы техникалық көмек машинасы

Battlefield support vehicle

A military engineering vehicle is a vehicle built for construction work or for the transportation of combat engineers on the battlefield. These vehicles may be modified civilian equipment (such as the armoured bulldozers that many nations field) or purpose built military vehicles (such as the AVRE). The first appearance of such vehicles coincided with the appearance of the first tanks, these vehicles were modified Mark V tanks for bridging and mine clearance. Modern military engineering vehicles are expected to fulfill numerous roles such as; bulldozer, crane, grader, excavator, dump truck, breaching vehicle, bridging vehicle, military ferry, amphibious crossing vehicle, and combat engineer section carrier.

A Heavy RE tank was developed shortly after World War I by Major Giffard LeQuesne Martel RE. This vehicle was a modified Mark V tank. Two support functions for these Engineer Tanks were developed: bridging and mine clearance. The bridging component involved an assault bridge, designed by Major Charles Inglis RE, called the Canal Lock Bridge, which had sufficient length to span a canal lock. Major Martel mated the bridge with the tank and used hydraulic power generated by the tank's engine to maneuver the bridge into place. For mine clearance the tanks were equipped with 2 ton rollers.

Between the wars various experimental bridging tanks were used to test a series of methods for bridging obstacles and developed by the Experimental Bridging Establishment (EBE). Captain SG Galpin RE conceived a prototype Light Tank Mk V to test the Scissors Assault Bridge. This concept was realised by Captain SA Stewart RE with significant input from a Mr DM Delany, a scientific civil servant in the employ of the EBE. MB Wild & Co, Birmingham, also developed a bridge that could span gaps of 26 feet using a complex system of steel wire ropes and a traveling jib, where the front section was projected and then attached to the rear section prior to launching the bridge. This system had to be abandoned due to lack of success in getting it to work, however the idea was later used successfully on the Beaver Bridge Laying Tank.

Once World War Two had begun, the development of armoured vehicles for use by engineers in the field was accelerated under Delaney's direction. The EBE rapidly developed an assault bridge carried on a modified Covenanter tank capable of deploying a 24 ton tracked load capacity bridge (Class 24) that could span gaps of 30 feet. However, it did not see service in the British armed forces, and all vehicles were passed onto Allied forces such as Australia and Czechoslovakia. A Class 30 design superseded the Class 24 with no real re design, simply the substitution of the Covenanter tank with a suitably modified Valentine. are used, while in Canada and other commonwealth nations the term "armoured engineer vehicle (AEV)" is used. There is no set template for what such a vehicle will look like, yet likely features include a large dozer blade or mine ploughs, a large caliber demolition cannon, augers, winches, excavator arms and cranes or lifting booms. These vehicles are designed to directly conduct obstacle breaching operations and to conduct other earth moving and engineering work on the battlefield. Good examples of this type of vehicle include the UK Trojan AVRE, the Russian IMR, and the US M728 Combat Engineer Vehicle. Although the term "armoured engineer vehicle" is used specifically to describe these multi purpose tank based engineering vehicles, that term is also used more generically in British and Commonwealth militaries to describe all heavy tank based engineering vehicles used in the support of mechanized forces. Thus, "armoured engineer vehicle" used generically would refer to AEV, AVLB, Assault Breachers, and so on.

Lighter and less multi functional than the CEVs or AEVs described above, these vehicles are designed to conduct earth moving work on the battlefield and generally be anti tank explosive proof. These vehicles have greater high speed mobility than traditional heavy equipment and are protected against the effects of blast and fragmentation. Good examples are the American M9 ACE and the UK FV180 Combat Engineer Tractor.

These vehicles are equipped with mechanical or other means for the breaching of man made obstacles. Common types of breaching vehicles include mechanical flails, mine plough vehicles, and mine roller vehicles. In some cases, these vehicles will also mount Mine clearing line charges. Breaching vehicles may be either converted armoured fighting vehicles or purpose built vehicles. In larger militaries, converted AFV are likely to be used as assault breachers while the breached obstacle is still covered by enemy observation and fire, and then purpose built breaching vehicles will create additional lanes for following forces. Good examples of breaching vehicles include the US M1150 Assault Breacher Vehicle, the UK Aardvark JSFU, and the Singaporean Trailblazer.

Several types of military bridging vehicles have been developed. An armoured vehicle launched bridge (AVLB) is typically a modified tank hull converted to carry a bridge into battle in order to support crossing ditches, small waterways, or other gap obstacles. Another type of bridging vehicle is the truck launched bridge. The Soviet TMM bridging truck could carry and launch a 10 meter bridge that could be daisy chained with other TMM bridges to cross larger obstacles. More recent developments have seen the conversion of AVLB and truck launched bridge with launching systems that can be mounted on either tank or truck for bridges that are capable of supporting heavy main battle tanks. Earlier examples of bridging vehicles include a type in which a converted tank hull is the bridge. On these vehicles, the hull deck comprises the main portion of the tread way while ramps extend from the front and rear of the vehicle to allow other vehicles to climb over the bridging vehicle and cross obstacles. An example of this type of armoured bridging vehicle was the Churchill Ark used in the Second World War.

Another type of CELLs are armoured fighting vehicles which are used to transport sappers (combat engineers) and can be fitted with a bulldozer's blade and other mine breaching devices. They are often used as APCs because of their carrying ability and heavy protection. They are usually armed with machine guns and grenade launchers and usually tracked to provide enough tractive force to push blades and rakes. Some examples are the U. S. M113 APC, IDF Puma, Nagmachon, Husky, and U. S. M1132 ESV (a Stryker variant).

One of the major tasks of military engineering is crossing major rivers. Several military engineering vehicles have been developed in various nations to achieve this task. One of the more common types is the amphibious ferry such as the M3 Amphibious Rig. These vehicles are self propelled on land, they can transform into raft type ferries when in the water, and often multiple vehicles can connect to form larger rafts or floating bridges. Other types of military ferries, such as the Soviet Plavayushij Transportyor Srednyj, are able to load while still on land and transport other vehicles cross country and over water. In addition to amphibious crossing vehicles, military engineers may also employ several types of boats. Military assault boats are small boats propelled by oars or an outboard motor and used to ferry dismounted infantry across water.

Most CEVs are armoured fighting vehicles that may be based on a tank chassis and have special attachments in order to breach obstacles. Such attachments may include dozer blades, mine rollers, cranes etc. An example of an engineering vehicle of this kind is a bridgelaying tank, which replaces the turret with a segmented hydraulic bridge. The Hobart's Funnies of the Second World War were a wide variety of armoured vehicles for combat engineering tasks. They were allocated to the initial beachhead assaults by the British and Commonwealth forces in the D Day landings.

The British Churchill tank because of its good cross country performance and capacious interior with side hatches became the most adapted with modifications, the base unit being the AVRE carrying a large demolition gun.

Dozer: The bulldozer blade was a valuable battlefield tool on the WWII M4 Sherman tank. A 1943 field modification added the hydraulic dozer blade from a Caterpillar D8 to a Sherman. The later M1 dozer blade was standardized to fit any Sherman with VVSS suspension and the M1A1 would fit the wider HVSS. Some M4s made for the Engineer Corps had the blades fitted permanently and the turrets removed. In the early stages of the 1944 Battle of Normandy before the Culin Cutter, breaking through the Bocage hedgerows relied heavily on Sherman dozers. M4 Doozit: Engineer Corps' Sherman dozer with demolition charge on wooden platform and T40 Whizbang rocket launcher (the Doozit did not see combat but the Whizbang did). Bridgelayer: The US field converted a few M4 in Italy with A frame supported bridge and heavy rear counter weight to make the Mobile Assault Bridge. British developments for Shermans included the fascine (used by 79th Armoured Division), Crib, Twaby Ark, Octopus, Plymouth (Bailey bridge), and AVRE (SBG bridge). Mine Clearing: British conversions included the Sherman Crab. The US developed an extensive array of experimental types:
T15/E1/E2: Series of mine resistant Shermans based on the T14 kit. Cancelled at war's end. Mine Exploder T1E1 Roller (Earthworm): Three sets of 6 discs made from armor plate. Mine Exploder T1E2 Roller: Two forward units with 7 discs only. Experimental. Mine Exploder T1E3/M1 Roller (Aunt Jemima): Two forward units with five 10' discs. Most widely used T1 variant, adopted as the M1. (picture)
Mine Exploder T1E4 Roller: 16 discs. Mine Exploder T1E5 Roller: T1E3/M1 w/ smaller wheels. Experimental. Mine Exploder T1E6 Roller: T1E3/M1 w/ serrated edged discs. Experimental
Mine Exploder T2 Flail: British Crab I mine flail. Mine Exploder T3 Flail: Based on British Scorpion flail. Development stopped in 1943. Mine Exploder T3E1 Flail: T3 w/ longer arms and sand filled rotor. Cancelled. Mine Exploder T3E2 Flail: E1 variant, rotor replaced with steel drum of larger diameter. Development terminated at war's end. Mine Exploder T4: British Crab II mine flail. Mine Exploder T7: Frame with small rollers with two discs each. Abandoned. Mine Exploder T8 (Johnny Walker): Steel plungers on a pivot frame designed to pound on the ground. Vehicle steering was adversely affected. Mine Exploder T9: 6' Roller. Difficult to maneuver. Mine Exploder T9E1: Lightened version, but proved unsatisfactory because it failed to explode all mines. Mine Exploder T10: Remote control unit designed to be controlled by the following tank. Cancelled. Mine Exploder T11: Six forward firing mortars to set off mines. Experimental. Mine Exploder T12: 23 forward firing mortars. Apparently effective, but cancelled. Mine Exploder T14: Direct modification to a Sherman tank, upgraded belly armor and reinforced tracks. Cancelled. Mine Excavator T4: Plough device. Developed during 1942, but abandoned. Mine Excavator T5/E1/E2: T4 variant w/ v shaped plough. E1/E2 was a further improvement. Mine Excavator T5E3: T5E1/E2 rigged to the hydraulic lift mechanism from the M1 dozer kit to control depth. Mine Excavator T6: Based on the v shape/T5, unable to control depth. Mine Excavator T2/E1/E2: Based on the T4/T5's, but rigged to the hydraulic lift mechanism from the M1 dozer kit to control depth.

M60A1 AVLB Armored Vehicle Launched Bridge, 60 feet (18 m) scissors bridge on M60A1 chassis. M60 AVLM Armored Vehicle Launched MICLIC (Mine Clearing Line Charge), modified M60 AVLB with up to 2 MICLIC mounted over the rear of the vehicle. M60 Panther M60 modified into a remotely controlled mine clearing tank. The turret is removed with the turret ring sealed, and the front of the vehicle is fitted with mine rollers. M728 CEV M60A1 based Combat Engineer Vehicle fitted with a folding A frame crane and winch attached to the front of the turret, and an M135 165mm demolition gun. Commonly fitted with the D7 bulldozer blade, or a mine clearing equipment. M728A1 Upgraded version of the M728 CEV.