Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
Американдық айналмалы пулемет
American rotary machine gun
M134 Minigun – американдық 7,62×51 мм НАТО стандартындағы алты түтікке ие айналмалы пулемет, өте жоғары атыс жылдамдығына ие (минутына 2000-6000 оқ). Ол Гатлинг стилінде айналатын түтіктер жиынтығымен және сыртқы қуат көзімен, әдетте электрмотормен жабдықталған. Атауындағы "Mini" сөзі General Electric компаниясының бұрынғы 20 мм M61 Vulcan сияқты айналмалы түтік конструкциясын қолданатын, ірі калибрлі үлгілермен салыстырылғанда берілген, ал "пулемет" – автокөліктік снарядтардың орнына мылтық оқтарын пайдалануын көрсетеді. "Минипушка" термині General Electric компаниясы алғаш шығарған нақты қару моделін білдіреді, бірақ "минипушка" термині кеңінен таралып, кез келген сыртқы қуатпен жұмыс істейтін, мылтық калибрлі айналмалы пулеметті білдіреді. Бұл термин кейде қуат көзі мен калибріне қарамастан, ұқсас атыс жылдамдығы мен құрылымы бар қаруларға қатысты қолданылады. Minigun АҚШ әскерінің бірнеше тармағында қолданылады. АҚШ Армиясы бұл үлгіні M134 және XM196 деп белгілейді, ал АҚШ Әуе күштері мен Әскери-теңіз күштері GAU 2/A және GAU 17/A деп атайды.
The M134 Minigun is an American 7.62×51mm NATO six barrel rotary machine gun with a high rate of fire (2,000 to 6,000 rounds per minute). It features a Gatling style rotating barrel assembly with an external power source, normally an electric motor. The "Mini" in the name is in comparison to larger caliber designs that use a rotary barrel design, such as General Electric's earlier 20 mm M61 Vulcan, and "gun" for the use of rifle ammunition as opposed to autocannon shells. "Minigun" refers to a specific model of weapon that General Electric originally produced, but the term "minigun" has popularly come to refer to any externally powered rotary gun of rifle caliber. The term is sometimes used loosely to refer to guns of similar rates of fire and configuration, regardless of power source and caliber. The Minigun is used by several branches of the U. S. military. Versions are designated M134 and XM196 by the United States Army, and GAU 2/A and GAU 17/A by the U. S. Air Force and U. S. Navy.
Тақырыбы: электрмен жұмыс істейтін Гатлинг пішіні
Қазіргі мини-пушканың алғабабы 1860 жылдары Ричард Джордан Гатлинг ойлап тапқан қолмен айналдырылатын механикалық құрылғы болды. Кейіннен ол, сол кезде салыстырмалы түрде жаңа өнертабыс болған электр қозғалтқышымен, мылтық калибрлі Гатлинг пулеметінің қолмен айналдырылатын механизмін ауыстырды. Гатлинг механизмнің жылдамдығын төмендеткеніне қарамастан, жаңа электрмен жұмыс істейтін Гатлинг пулеметінің теориялық атыс жылдамдығы минутына 3000 оқ болды, бұл қазіргі заманғы бір стволды пулеметтің жылдамдығынан шамамен үш есе жоғары. Гатлингтің электрмен жұмыс істейтін дизайны 1893 жылғы 25 шілдеде №502,185 АҚШ патентын алды. Оның жетістіктеріне қарамастан, Гатлинг пулеметі арзан, жеңіл салмақты, кері импульсті және газды пулеметтер ойлап табылғаннан кейін пайдаланудан шықты; Гатлинг өзі бір кездерде банкротқа ұшырады. Бірінші дүниежүзілік соғыс кезінде бірнеше неміс компаниясы ұшақтарда қолдану үшін сыртқы қуатпен жұмыс істейтін қарулар жасаумен айналысты. Осы жобалардың бірі Fokker Leimberger болды, ол сыртқы қуатпен жұмыс істейтін 12 стволды айналмалы пулемет, ол 7.92×57 мм Mauser оғын пайдаланды; оның минутына 7000 айналымнан астам атуға қабілетті екені айтылды, бірақ оның "жаңғаққақ" айналмалы бөлінген құбырлы дизайнынан туындаған жиі патрон қабықтарының жарылуына ұшырады, бұл дәстүрлі айналмалы пулеметтерден өзгеше. Осы неміс қаруларының ешқайсысы соғыс кезінде өндіріске енгізілмеді, бірақ Батыс майданында сынақтан өткен бәсекелес Siemens прототипі (мүмкін, басқа механизмді пайдаланған) әуе шайқасында жеңіске жетті.
The ancestor to the modern minigun was a hand cranked mechanical device invented in the 1860s by Richard Jordan Gatling. He later replaced the hand cranked mechanism of a rifle caliber Gatling gun with an electric motor, a relatively new invention at the time. Even after Gatling slowed the mechanism, the new electric powered Gatling gun had a theoretical rate of fire of 3,000 rounds per minute, roughly three times the rate of a typical modern, single barreled machine gun. Gatling's electric powered design received U. S. Patent #502,185 on July 25, 1893. Despite his improvements, the Gatling gun fell into disuse after cheaper, lighter weight, recoil and gas operated machine guns were invented; Gatling himself went bankrupt for a period. During World War I, several German companies were working on externally powered guns for use in aircraft. One of these designs was the Fokker Leimberger, an externally powered 12 barrel rotary gun using the 7.92×57mm Mauser round; it was claimed to be capable of firing over 7,000 rpm, but suffered from frequent cartridge case ruptures due to its "nutcracker" rotary split breech design, which is different to that of conventional rotary gun designs. None of these German guns went into production during the war, although a competing Siemens prototype (possibly using a different action), which was tried on the Western Front, scored a victory in aerial combat.
Минигун: 1960 жылдар Вьетнам
1960 жылдары АҚШ Қарулы күштері Вьетнам соғысында қолдану үшін электрмен жұмыс істейтін, айналмалы стволды Гатлинг стиліндегі қарудың қазіргі заманғы нұсқаларын зерттеуді бастады. Вьетнам соғысындағы американдық әскерлер, тығыз ормандар арқылы әскерлер мен жабдықтарды тасымалдаудың басты құралы ретінде тікұшақтарды пайдаланғандықтан, тікұшақтарының жерге қонғанда шағын қарулардың атысына және граната тастағыштардың (РПГ) шабуылына ұшырайтынын анықтады. Тікұшақтарда бір ғана пулемет болғанымен, оларды тығыз орманда жасырынып отырған шабуылшыларды кенеттен тоқтату үшін қолданғанда, стволдардың қызып кетуіне немесе патрондардың істемеуіне жиі келіп жататын. Жоғары ату жылдамдығымен және сенімді қару жасау үшін General Electric компаниясының инженерлері 20 мм М61 Вулкан зеңбірегінің айналмалы бөлігін 7,62×51 мм НАТО оқ-дәрісіне бейімдеді. Нәтижесінде пайда болған M134 деп аталған қару, "Минигън" деп белгілі болды және минутына 6000 оқтан астам атуға қабілетті. Қарудың ату жылдамдығы реттелетін (таңдаулы) және әдетте минутына 3000-4000 оқ аралығында орнатылған, бірақ 6000 оққа дейін атуға мүмкіндік береді. Минигън Хьюз OH 6 Cayuse және Белл OH 58 Kiowa тікұшақтарының бүйірлік бөлімдеріне, Bell AH 1 Cobra шабуылдық тікұшақтарының мұнараларына және палубаларына, сондай-ақ Bell UH 1 Iroquois көліктік тікұшақтарының есіктеріне, палубаларына және бөлімдеріне орнатылды. Бірнеше ірі ұшақтар жақыннан қолдау көрсету үшін минигънмен жабдықталды: Cessna A 37 Dragonfly ішкі зеңбірекпен және қанаттың сыртқы ілмектеріндегі бөлімдермен, сондай-ақ Дуглас A 1 Skyraider, қанаттың сыртқы ілмектеріндегі бөлімдермен. Басқа да танымал шабуылдық ұшақтарға Дуглас AC 47 Spooky, Fairchild AC 119 және Lockheed AC 130 жатады. 1990 жылы Dillon Aero "шетелдік қолданушыдан" көптеген Минигън қаруларын және қосалқы бөлшектерін сатып алды. Қарулар үздіксіз атудан бас тартты, олардың тозған қарулар екенін көрсетті. Компания қаруларды қоймаға қоюдың орнына, тапқан мәселелерді жоюға шешім қабылдады. Ақаулықтарды жою Минигънның жалпы дизайнын жақсартуға әкелді. Dillon компаниясының Минигънды жақсарту жөніндегі жұмысы туралы ақпарат 160-шы SOAR-ға жетті, және компания өнімдерін көрсету үшін Кентукки штатындағы Форт-Кэмпбеллге шақырылды. Оқ-дәрілерді белдеуден бөліп, қару корпусына беруге арналған делинкер және басқа да бөлшектер Кэмпбелл полигонында сынақтан өтті. 160-шы SOAR делинкердің өнімділігіне әсерленді және 1997 жылы оларды тапсырыс беруді бастады. Бұл Dillon компаниясын бұранда, корпус және ствол сияқты басқа да дизайндық аспектілерді жақсартуға итермеледі. 1997-2001 жылдар аралығында Dillon Aero жылына 25-30 өнім өндірді. 2001 жылы компания өнімділігі мен қызмет мерзімін арттыратын жаңа бұранда дизайны бойынша жұмыс істеді. 2002 жылға қарай Минигънның барлық компоненттері жақсартылды, сондықтан Dillon жақсартылған компоненттермен толық қару шығара бастады. Қару 160-шы SOAR-да стандартты қару жүйесі ретінде тез сатып алынды. Содан кейін қару Армияның ресми сатып алу жүйесінен өтті, және 2003 жылы Dillon Aero Минигън сертификатталды және M134D деп тағайындалды. M134D-нің негізгі бөлігі болат корпус пен ротордан тұрды. Салмақты азайту мақсатында титан корпус пен ротор енгізілді, нәтижесінде M134D T пайда болды, салмағы азайды. Қару корпусының тозуға дейін жұмыс істеу мерзімі 500 000 оқтан асты, бұл дәстүрлі пулеметтің 40 000 оқтан аспайтын қызмет мерзімінен әлдеқайда жоғары, бірақ басқа айналмалы зеңбіректерге қарағанда төмен. Екі қарудың гибриді M134D H болды, оның болат корпусы және титан роторы болды. Болат компоненттерінің арқасында ол арзанға түсті және M134D T-ден сәл ғана ауыр болды, ал қызмет мерзімі 1,5 миллион оққа дейін қалпына келтірілді. M134D H қазіргі уақытта 160-шы полктің әртүрлі платформаларында қолданылуда. Garwood Industries 1960 жылдарғы Минигън дизайнына қазіргі заманғы әскери және ISO стандарттарына сәйкес келетін бірнеше өзгерістер енгізді. 2015 жылдан 2017 жылға дейін Garwood Industries компаниясының бас директоры Трейси Гарвуд, атыс қаруларын сатушы Майкл Фокспен және қару контрабандисі Тайлер Карлсонмен бірлесіп, мексикалық есірткі картельдеріне Минигън қаруларын жеткізуге қатысты. Гарвуд ATF-ке жалған құжаттарды ұсынды, онда M134G ротор корпустарының бір бөлігі жойылғаны туралы мәлімдеме жасады, бірақ шындығында олар қару контрабандасымен айналысатын топқа сатылды. 2017 жылы федералды агенттер Фокстың үйінде тінту жүргізіп, Гарвуд жойылған деп хабарлаған екі ротор корпусын тапты. Ротор корпустарының бірнешеуі Мексикаға жіберілді, ал мексикалық құқық қорғау органдары картельден жойылған ротор корпусын пайдаланған M134G қаруын тапты. Гарвуд, сатып алушылардың мексикалық картельдер екенін білмегенін мәлімдеді, бірақ олардың қаруды заңсыз мақсаттар үшін пайдаланатынын білген.
In the 1960s, the United States Armed Forces began exploring modern variants of the electric powered, rotating barrel Gatling style weapons for use in the Vietnam War. American forces in the Vietnam War, which used helicopters as one of the primary means of transporting soldiers and equipment through the dense jungle, found that their helicopters were vulnerable to small arms fire and rocket propelled grenade (RPG) attacks when they slowed to land. Although helicopters had mounted single barrel machine guns, using them to repel attackers hidden in the dense jungle foliage often led to overheated barrels or cartridge jams. To develop a more reliable weapon with a higher rate of fire, General Electric designers scaled down the rotary barrel 20 mm M61 Vulcan cannon for 7.62×51mm NATO ammunition. The resulting weapon, designated M134 and known as the "Minigun", could fire up to 6,000 rounds per minute without overheating. The gun has a variable (i. e. selectable) rate of fire, specified to fire at rates of up to 6,000 rpm with most applications set at rates between 3,000 and 4,000 rounds per minute. The Minigun was mounted on Hughes OH 6 Cayuse and Bell OH 58 Kiowa side pods; in the turret and on pylon pods of Bell AH 1 Cobra attack helicopters; and on door, pylon and pod mounts on Bell UH 1 Iroquois transport helicopters. Several larger aircraft were outfitted with miniguns specifically for close air support: the Cessna A 37 Dragonfly with an internal gun and with pods on wing hardpoints; and the Douglas A 1 Skyraider, also with pods on wing hardpoints. Other famous gunship airplanes are the Douglas AC 47 Spooky, the Fairchild AC 119, and the Lockheed AC 130. Around 1990, Dillon Aero acquired a large number of Miniguns and spares from "a foreign user". The guns kept failing to shoot continuously, revealing that they were actually worn out weapons. The company decided to fix the problems encountered, rather than simply putting the guns into storage. Fixing failure problems ended up improving the Minigun's overall design. Word of Dillon's efforts to improve the Minigun reached the 160th SOAR, and the company was invited to Fort Campbell, Kentucky, to demonstrate its products. A delinker, used to separate cartridges from ammunition belts and feed them into the gun housing, and other parts were tested on Campbell's ranges. The 160th SOAR were impressed by the delinker's performance and began ordering them by 1997. This prompted Dillon to improve other design aspects including the bolt, housing and barrel. Between 1997 and 2001, Dillon Aero was producing 25–30 products a year. In 2001, it was working on a new bolt design that increased performance and service life. By 2002, virtually every component of the minigun had been improved, so Dillon began producing complete weapons with improved components. The guns were purchased quickly by the 160th SOAR as its standardized weapon system. The gun then went through the Army's formal procurement system approval process, and in 2003 the Dillon Aero minigun was certified and designated M134D. The core of the M134D was a steel housing and rotor. To focus on weight reduction, a titanium housing and rotor were introduced, creating the M134D T which had reduced weight from to The gun housing had a 500,000 round lifespan before it wore out, which was far higher than a conventional machine gun's 40,000 round lifespan but lower than that of other rotary guns. A hybrid of the two weapons resulted in the M134D H, which had a steel housing and titanium rotor. It was cheaper with the steel component and only heavier than the M134D T, and restored its lifespan to 1.5 million rounds. The M134D H is currently in use on various 160th Regiment platforms. Garwood Industries made several other modifications to the 1960s Minigun design in order to meet modern day military and ISO standards. From 2015 to 2017 Garwood Industries CEO Tracy Garwood collaborated with firearms dealer Michael Fox and weapons smuggler Tyler Carlson to supply miniguns to Mexican drug cartels. Garwood submitted false paperwork to the ATF claiming that some M134G rotor housings had been destroyed when they were actually sold to the gun running ring. In 2017 federal agents raided Fox's home and recovered two of the rotor housings that Garwood had reported destroyed. A number of the rotor housings were shipped to Mexico and a completed M134G using a reportedly destroyed rotor housing was recovered from a cartel by Mexican law enforcement. Garwood claimed he did not know that the intended buyers were Mexican cartels although he was aware that they were to be used for illegal activity.
Құрылымы мен нұсқалары
Негізгі мини-пулемет – алты стволды, ауамен салқындатылатын және электрмен жұмыс істейтін айналмалы машина. Электр жетегі қаруды корпусы ішінде айналдырады, айналмалы оқ ату механизмі және айналмалы патрон ұясы бар. Мини-пулеметтің көп стволды конструкциясы қызып кетуін болдырмауға көмектеседі, сонымен қатар басқа да функцияларды атқарады. Көптеген стволдар жоғары ату жылдамдығына мүмкіндік береді, себебі ату, гильзаны шығару және патрон салу процесі барлық стволдарда бір уақытта жүзеге асады. Осылайша, бір ствол атып тұрғанда, екеуі гильза шығарудың әртүрлі сатысында болады, ал тағы үшеуі патронмен толтырылады. Мини-пулемет дөңгелек корпус ішінде орналасқан бірнеше жабық инелі мылтық стволдарынан тұрады. Стволдар сыртқы қуат көзімен айналады, әдетте электр, пневматикалық немесе гидравликалық. Басқа айналмалы стволды зеңбіректер атылған оқ-дәрінің газ қысымымен немесе кері импульсымен жұмыс істейді. Газбен жұмыс істейтін XM133 аталымы да әзірленді. Қару тізбектелген оқ-дәрілермен қоректендіріле алады, бірақ патрон камераға жіберілген кезде тізбекті ажырату үшін арнайы ажырату құрылғысы қажет. Алғашқы ажырату құрылғысы MAU 56/A деп аталды, бірақ кейіннен жақсартылған MAU 201/A құрылғысымен ауыстырылды. General Electric мини-пулеметі АҚШ әскерінің бірнеше тармағында түрлі атаулармен қолданылады. АҚШ армиясы негізгі бекітілген қарулану нұсқасына M134 атауын берді, ал сол қару АҚШ Әуе күштері (USAF) және АҚШ Әскери-теңіз күштері (USN) тарапынан GAU 2/A (бекітілген орнатуда) және GAU 17/A (икемді орнатуда) деп аталды. Әуе күштерінің мини-пулеметінің үш нұсқасы бар, ал АҚШ армиясының қаруы атауын өзгертпей бірнеше жақсартулар енгізген сияқты. M134D – Dillon Aero компаниясы жасаған және өндірген M134-тің жақсартылған нұсқасы, ал Garwood Industries M134G нұсқасын өндіреді. Қолжетімді дереккөздер M134 пен GAU 2/A және M134 пен GAU 2B/A арасындағы байланысты көрсетеді. Lockheed AH 56 Cheyenne тікұшағының XM53 қару-жарақ жүйесі үшін арнайы әзірленген қосымша гильза шығару тізбегі бар XM196 аталымы да жасалды. Басқа нұсқаны Әуе күштері әсіресе икемді орнатулар үшін әзірледі, негізінен Bell UH 1N Twin Huey тікұшағымен GAU 17/A ретінде. General Dynamics компаниясы шығарған бұл нұсқада оттық жасырушы бар. GAU 17/A-ның негізгі соңғы пайдаланушылары – USN және АҚШ Теңіз корпусы (USMC), олар қаруды қорғаныс қару ретінде бірнеше тікұшақтар мен су үстіндегі кемелерде орнатады. GAU 17/A тікұшақтарынан кемелерге Mk16 20 мм зеңбіректерден алынған пинтеллдік орнатулармен 2003 жылғы Ирак соғысы алдында қорғану үшін жылдам жеткізілді. 30 күн ішінде 59 жүйе орнатылды. GAU 17/A машиналық пулеметтер сериясында Mk 44 деп аталады.
The basic minigun is a six barrel, air cooled, and electrically driven rotary machine gun. The electric drive rotates the weapon within its housing, with a rotating firing pin assembly and rotary chamber. The minigun's multi barrel design helps prevent overheating, but also serves other functions. Multiple barrels allow for a greater capacity for a high firing rate, since the serial process of firing, extraction, and loading is taking place in all barrels simultaneously. Thus, as one barrel fires, two others are in different stages of shell extraction and another three are being loaded. The minigun is composed of multiple closed bolt rifle barrels arranged in a circular housing. The barrels are rotated by an external power source, usually electric, pneumatic, or hydraulic. Other rotating barrel cannons are powered by the gas pressure or recoil energy of fired cartridges. A gas operated variant, designated XM133, was also developed. While the weapon can feed from linked ammunition, it requires a delinking feeder to strip the links as the rounds are fed into the chambers. The original feeder unit was designated MAU 56/A, but has since been replaced by an improved MAU 201/A unit. The General Electric minigun is used in several branches of the U. S. military, under a number of designations. The basic fixed armament version was given the designation M134 by the United States Army, while the same weapon was designated GAU 2/A (on a fixed mount) and GAU 17/A (flexible mount) by the United States Air Force (USAF) and United States Navy (USN). The USAF minigun variant has three versions, while the US Army weapon appears to have incorporated several improvements without a change in designation. The M134D is an improved version of the M134 designed and manufactured by Dillon Aero, while Garwood Industries manufactures the M134G variant. Available sources show a relation between both M134 and GAU 2/A and M134 and GAU 2B/A. A separate variant, designated XM196, with an added ejection sprocket was developed specifically for the XM53 Armament Subsystem on the Lockheed AH 56 Cheyenne helicopter. Another variant was developed by the USAF specifically for flexible installations, beginning primarily with the Bell UH 1N Twin Huey helicopter, as the GAU 17/A. Produced by General Dynamics, this version has a slotted flash hider. The primary end users of the GAU 17/A have been the USN and the United States Marine Corps (USMC), which mount the gun as defensive armament on a number of helicopters and surface ships. GAU 17/As from helicopters were rushed into service for ships on pintle mountings taken from Mk16 20 mm guns for anti swarm protection in the Gulf ahead of the 2003 Iraq War 59 systems were installed in 30 days. The GAU 17/A is designated Mk 44 in the machine gun series
АҚШ Армиясының атауы АҚШ Әуе күшінің атауы АҚШ Әскери-теңіз күшінің атауы СипаттамасыXM134/M134GAU 2/AN/A7.62×51мм НАТО GE "Minigun" 6 стволды машинаN/AGAU 2A/AN/AGAU 2/A нұсқасы; белгісіз айырмашылықтарM134GAU 2B/AMk 25 MOD0GAU 2A/A нұсқасы; белгісіз айырмашылықтарN/AGAU 17/AN/AGAU 2B/A нұсқасы; әртүрлі кемелерге орнатылуы мүмкін, MAU 201/A немесе MAU 56/A ажырату құрылғысын пайдаланады. N/AN/AMk 44Белгісіз айырмашылықтарXM214 МикропулеметN/AN/A5.56×45 мм НАТО оғын атып, XM134-тің кішілендірілген нұсқасы. АҚШ әскері жобаға қызығушылық танытпады, сондықтан ол жаппай өндіріске енгізілген жоқ. XM196N/AN/AM134/GAU 2B/A нұсқасы; гильза шығару тізбегі қосылып өзгертілген; AH 56 тікұшағының XM53 қару-жарақ жүйесінде қолдануға арналған.
US Army designation US Air Force designation US Navy designation DescriptionXM134/M134GAU 2/AN/A7.62×51mm NATO GE "Minigun" 6 barreled machine gunN/AGAU 2A/AN/AGAU 2/A variant; unknown differencesM134GAU 2B/AMk 25 MOD0GAU 2A/A variant; unknown differencesN/AGAU 17/AN/AGAU 2B/A variant; can be mounted to a variety of different craft, uses either an MAU 201/A or MAU 56/A delinking feeder. N/AN/AMk 44Unknown differencesXM214 MicrogunN/AN/AScaled down variant of the XM134 firing the 5.56×45mm NATO round. The U. S. military lost interest in the project, and it never entered mass production. XM196N/AN/AM134/GAU 2B/A variant; housing modified by addition of an ejection sprocket; for use in the XM53 armament subsystem on the AH 56 helicopter
Қарулы қаптар және басқа да монтаждау жүйелері
Қарудың алғашқы қолданылу орындарының бірі – ұшақтардың қару-жарағын орнату болды. Бұл қарулар әр түрлі тұрақты және айналмалы қанатты ұшақтарда, негізінен Вьетнам соғысы кезінде қолданылды, кейіннен олар біршама уақыт қолданыста болды. Әуе күштері SUU 11/A деп, ал АҚШ армиясы M18 деп атаған стандартты қапшық салыстырмалы түрде қарапайым, толыққанды дербес құрылғы болып табылды. Онда 1500 оқтан тұратын дүңгірше тікелей қаруға оқ-дәрілерді жеткізіп тұрды. Бұл, Минигун қапшыққа орнатылғанда стандартты MAU 56/A байланыссыз қоректендіру блогын қажет етпейді деген сөз. Бұл қапшықтың бірнеше түрі бар. Бастапқыда Douglas AC 47 Spooky және Fairchild AC 119 сияқты тұрақты қанатты ұшақтарда SUU 11/A ұшақ қапшықтарын біріктіру арқылы жақтан атуға арналған қару-жарақ орнатылды. Көбінесе олардың аэродинамикалық алдыңғы бөліктері алынып тасталды және жергілікті құрастырылған тіреуге орнатылды. Бұл қапшықтар өзгертілмеген, сыртқы қуат көзі қажет етілмеді және ұшақтың отты басқару жүйесімен байланысты болды. Басқа миссиялар үшін осы қапшықтардың қажеттілігі арнайы "Минигун модулі" – MXU 470/A құрастыруға әкелді. Бұл модульдер алғаш рет 1967 жылдың қаңтарында 2000 оқтан тұратын барабан және ұшу кезінде оңай қайта зарядтауға мүмкіндік беретін электрлік қоректендіргіш сияқты мүмкіндіктермен келді. Бастапқы модульдер сенімді болмады және дереу қолданудан алынды. Жыл соңына қарай қиындықтар шешіліп, модульдер AC 47, AC 119 және AC 130 ұшақтарына қайта орнатылды. Арнайы оқ-дәрі жиынтығында әр бесінші "доп" оқ артиллериялық оқпен алмастырылды. Бұл ұшақтар Вьетконгтан "Солғайлы айдаһарды өртеп жіберуші" деген лақап алды, себебі олардың отты шашу және кез келген нысананы жою қабілетіне байланысты. AC 47 үш MXU 470/A (AC 119-да төртеу орнатылған) қапшығымен жабдықталған. Олардың бірдей атылуы жаудың көзінде қорқынышты көрініс тудырды. Алғашқы AC 130A Gunship II ұшақтарында MXU 470/A қапшықтары болған жоқ, олардың орнына GAU 2/A қолданылды. Онда төрт 7.62 мм GAU 2/A мини-пулемет қапшығынан басқа төрт 20 мм M61 Vulcan 6 түтікшелі айналмалы пулеметтері де болды. Бұл конфигурация екі жылдан кейін, 1969 жылы GAU 2/A және M61 пулеметтерінің екеуі алынып, екі 40 мм (1.58 дюйм) L/60 Bofors пулеметі қосылып, AC 130A "Surprise Package" деп аталды. Бұл конфигурация 1971 жылдың соңында AC 130E Pave Aegis ұшағы келгенге дейін тағы екі жыл бойы сақталды. Бұл ұшақта мини-пулеметтер және 40 мм Bofors пулеметтері болған жоқ, олардың орнына екі 20 мм M61 Vulcan, бір 40 мм L/60 Bofors және бір 105 мм (4.13 дюйм) M102 гаубицасы орнатылды. Бұл конфигурация 2000 жылдардың басына дейін сақталды. Содан кейін AC 130Hs (AC 130E ұшақтары авионика жаңартудан өткеннен кейін H үлгісіне қайта тағайындалды) қайта жөндеуден өтті, екі M61 Vulcan алынып, бір General Dynamics 25 мм (0.984 дюйм) GAU 12/U Equalizer 5 түтікшелі айналмалы пулеметімен ауыстырылды (H үлгісі сақталды). Жақсартылған MXU 470/A модульдері Cessna O 2 Skymaster сияқты жеңіл ұшақтарда да қолдануға ұсынылды, бірақ олар тым ауыр және икемсіз болып шықты. Екі MXU 470/A модульдері Fairchild AU 23A Peacemaker ұшағында да сынақтан өтті, бірақ Таиланд Корольдік әуе күштері кейіннен M197 20 мм пулеметімен жабдықталған басқа конфигурацияны таңдады. 2013 жылдың қыркүйегінде Dillon Aero M134D H үшін DGP2300 қару модулін шығарды. Онда 3000 оқ бар, бұл мини-пулеметті бір минут бойы атуға жеткілікті. Жүйе толыққанды дербес, сондықтан оны салмағын, айналу моментін және пулемет күшін көтере алатын кез келген ұшаққа орнатуға болады. Модульде ұшақтың электр жүйесіне қосылып зарядталатын жеке батареясы бар.
One of the first applications of the weapon was in aircraft armament pods. These gun pods were used by a wide variety of fixed and rotary wing aircraft mainly during the Vietnam War, remaining in inventory for a period afterward. The standard pod, designated SUU 11/A by the Air Force and M18 by the U. S. Army, was a relatively simple unit, completely self contained, with a 1,500 round magazine directly feeding delinked ammunition into the weapon. This means the Minigun fitted to the pod does not require the standard MAU 56/A delinking feeder unit. A number of variants of this pod exist. Initially on fixed wing gunships such as the Douglas AC 47 Spooky and Fairchild AC 119, the side firing armament was fitted by combining SUU 11/A aircraft pods, often with their aerodynamic front fairings removed, with a locally fabricated mount. These pods were essentially unmodified, required no external power, and were linked to the aircraft's fire controls. The need for those pods for other missions led to the development and fielding of a purpose built "Minigun module" for gunship use, designated the MXU 470/A. These units first arrived in January 1967 with features such as an improved 2,000 round drum and electric feeder allowing simplified reloading in flight. The initial units were unreliable and were withdrawn almost immediately. By the end of the year, the difficulties had been worked out and the units were again being fitted to AC 47s, AC 119s, and AC 130s, with a specific ammunition load that replaced every fifth 'ball' round with a tracer round to enable better accuracy by the gunners, and also earning these airborne gunships the nickname 'Puff the Magic Dragon' by the Viet Cong due to their apparent ability of spitting fire and making everything they hit disappear or die. The AC 47 had three side mounted MXU 470/As (four were mounted on its replacement, the AC 119) and when all firing at once created a devastating image in the eyes of the enemy. The first AC 130A Gunship IIs did away with the MXU 470/A mounts and instead used GAU 2/As, and not only had four 7.62mm GAU 2/A minigun mounts, but added four 20mm M61 Vulcan 6 barrel rotary cannons; this configuration was upgraded two years later in 1969 by removing two each of the GAU 2/As and M61s and adding two 40mm (1.58 in) L/60 Bofors cannons in the aptly named AC 130A 'Surprise Package'. This configuration lasted two more years until, in late 1971, the AC 130E Pave Aegis arrived, which did away with the miniguns altogether and one of the 40mm Bofors and instead went to the configuration of two 20mm M61 Vulcan, one 40mm L/60 Bofors and one 105 mm (4.13 in) M102 howitzer, a configuration that lasted until the early 2000s when the AC 130Hs (the AC 130Es had had an avionics upgrade and redesignated to H models) underwent a refit and the two M61 Vulcans were removed and replaced with one General Dynamics 25 mm (0.984 in) GAU 12/U Equalizer 5 barrel rotary cannon (while still retaining the H suffix). The improved MXU 470/As were even being proposed for lighter aircraft such as the Cessna O 2 Skymaster used by Forward Air Controllers but proved too heavy and cumbersome. A fit of two MXU 470/As was also tested on the Fairchild AU 23A Peacemaker, though the Royal Thai Air Force later elected to use another configuration with the M197 20 mm cannon. In September 2013, Dillon Aero released the DGP2300 gun pod for the M134D H. It contains 3,000 rounds, enough ammunition to fire the minigun for a full minute. The system is entirely self contained, so it can be mounted on any aircraft that can handle the weight, rotational torque, and recoil force of the gun. The pod has its own battery which can be wired into the aircraft's electrical system to maintain a charge. US Army designation US Air Force designation DescriptionXM18SUU 11/AGun pod fitted with the GAU 2/A/M134 7.62 mm machine gun and fixed rate of fire of 4,000 RPMXM18E1/M18SUU 11A/ASUU 11/A/XM18 variant; various improvements including additional auxiliary power and selectable fire rate capability (2,000 or 4,000 RPM)M18E1/A1SUU 11B/ASUU 11A/A/M18 variant; differences modified selectable fire rate capability (3,000 or 6,000 RPM)Mk 49 MOD0 and MOD1Remote weapon station mount
АҚШ армиясының белгісі АҚШ Әуе күшінің белгісі СипаттамасыXM18SUU 11/AGun қапшығы GAU 2/A/M134 7.62 мм пулеметімен жабдықталған және 4000 айналым/мин тұрақты атыс жылдамдығыXM18E1/M18SUU 11A/ASUU 11/A/XM18 түрі; қосымша қосалқы қуат және таңдамалы атыс жылдамдығы (2000 немесе 4000 айналым/мин) мүмкіндіктеріM18E1/A1SUU 11B/ASUU 11A/A/M18 түрі; айырмашылықтар таңдамалы атыс жылдамдығы (3000 немесе 6000 айналым/мин) мүмкіндіктеріMk 49 MOD0 және MOD1 Қашықтан басқарылатын қару станциясы тіреуі
One of the first applications of the weapon was in aircraft armament pods. These gun pods were used by a wide variety of fixed and rotary wing aircraft mainly during the Vietnam War, remaining in inventory for a period afterward. The standard pod, designated SUU 11/A by the Air Force and M18 by the U. S. Army, was a relatively simple unit, completely self contained, with a 1,500 round magazine directly feeding delinked ammunition into the weapon. This means the Minigun fitted to the pod does not require the standard MAU 56/A delinking feeder unit. A number of variants of this pod exist. Initially on fixed wing gunships such as the Douglas AC 47 Spooky and Fairchild AC 119, the side firing armament was fitted by combining SUU 11/A aircraft pods, often with their aerodynamic front fairings removed, with a locally fabricated mount. These pods were essentially unmodified, required no external power, and were linked to the aircraft's fire controls. The need for those pods for other missions led to the development and fielding of a purpose built "Minigun module" for gunship use, designated the MXU 470/A. These units first arrived in January 1967 with features such as an improved 2,000 round drum and electric feeder allowing simplified reloading in flight. The initial units were unreliable and were withdrawn almost immediately. By the end of the year, the difficulties had been worked out and the units were again being fitted to AC 47s, AC 119s, and AC 130s, with a specific ammunition load that replaced every fifth 'ball' round with a tracer round to enable better accuracy by the gunners, and also earning these airborne gunships the nickname 'Puff the Magic Dragon' by the Viet Cong due to their apparent ability of spitting fire and making everything they hit disappear or die. The AC 47 had three side mounted MXU 470/As (four were mounted on its replacement, the AC 119) and when all firing at once created a devastating image in the eyes of the enemy. The first AC 130A Gunship IIs did away with the MXU 470/A mounts and instead used GAU 2/As, and not only had four 7.62mm GAU 2/A minigun mounts, but added four 20mm M61 Vulcan 6 barrel rotary cannons; this configuration was upgraded two years later in 1969 by removing two each of the GAU 2/As and M61s and adding two 40mm (1.58 in) L/60 Bofors cannons in the aptly named AC 130A 'Surprise Package'. This configuration lasted two more years until, in late 1971, the AC 130E Pave Aegis arrived, which did away with the miniguns altogether and one of the 40mm Bofors and instead went to the configuration of two 20mm M61 Vulcan, one 40mm L/60 Bofors and one 105 mm (4.13 in) M102 howitzer, a configuration that lasted until the early 2000s when the AC 130Hs (the AC 130Es had had an avionics upgrade and redesignated to H models) underwent a refit and the two M61 Vulcans were removed and replaced with one General Dynamics 25 mm (0.984 in) GAU 12/U Equalizer 5 barrel rotary cannon (while still retaining the H suffix). The improved MXU 470/As were even being proposed for lighter aircraft such as the Cessna O 2 Skymaster used by Forward Air Controllers but proved too heavy and cumbersome. A fit of two MXU 470/As was also tested on the Fairchild AU 23A Peacemaker, though the Royal Thai Air Force later elected to use another configuration with the M197 20 mm cannon. In September 2013, Dillon Aero released the DGP2300 gun pod for the M134D H. It contains 3,000 rounds, enough ammunition to fire the minigun for a full minute. The system is entirely self contained, so it can be mounted on any aircraft that can handle the weight, rotational torque, and recoil force of the gun. The pod has its own battery which can be wired into the aircraft's electrical system to maintain a charge. US Army designation US Air Force designation DescriptionXM18SUU 11/AGun pod fitted with the GAU 2/A/M134 7.62 mm machine gun and fixed rate of fire of 4,000 RPMXM18E1/M18SUU 11A/ASUU 11/A/XM18 variant; various improvements including additional auxiliary power and selectable fire rate capability (2,000 or 4,000 RPM)M18E1/A1SUU 11B/ASUU 11A/A/M18 variant; differences modified selectable fire rate capability (3,000 or 6,000 RPM)Mk 49 MOD0 and MOD1Remote weapon station mount