Holden Ute

Australian mid size coupe utility
Holden Commodore based utility vehicles built from 1990 to 2000

The Holden Ute was a coupe utility built by Holden, the Australian subsidiary of General Motors, since 2000. Before then, Holden had marketed their Commodore based utility models under the Holden Utility (VG) and Holden Commodore utility (VP, VR, VS) names, although the term “Holden Ute” was also used in their official marketing literature. The Holden Ute name is often used for earlier Holden Utility models (which were produced from 1951 to 1984) as the word "ute" is a colloquial term used commonly in Australia for a utility vehicle. Holden's performance division, an independent company called HSV assembles a high performance version called the Maloo. Between 2003 and 2007, Holden built a stretched, crew cab version of the Ute with four doors and seating for five, called the Holden Crewman and between 2003 and 2005 a cab chassis version known as the Holden One Tonner. The VX Commodore based Ute launched with a locally built 3.8 litre Ecotec V6 engine of Buick design. A 5.7 litre Generation III V8 engine option was also available, but this was replaced by the 6.0 litre Generation 4 in 2006, and updated to the L98 specification later on that year. In 2004, Holden replaced the venerable V6 with a 3.6 litre Alloytec unit. The Australian assembled Ute was to be sold in the United States as the Pontiac G8 ST starting in 2009 alongside the four door Commodore based G8 sedan. However, due to GM's company wide model review, a result of the 2008 global financial crisis, such plans were shelved on 6 January 2009. Exports of the G8 sedan remain unaffected. Sales of the Ute in South Africa as the Chevrolet Lumina SS commenced during 2006/2007 and in Middle East in 2009/2010, making it the first full size Chevrolet coupé utility ever since the 1987 discontinuation of the El Camino (even though this Lumina was never sold in the USA).

The Holden 50 2106 was the first Holden Ute, based on the Holden 48 215.

The second generation 'ute' was a revision of the 50 2106 and was based on the FE to EK Holden and retained the sedan body as a base.

The third generation Holden based ute was slightly more refined than previous models, however still retained the full length floorpan, although gained the station wagon's wheelbase.

The HQ WB was the first full body redesign of the ute and dropped the rear station wagon floor pan for a shorter, front row only style floorpan, along with introducing the Holden One Tonner cab chassis, the HQ ute is highly desirable as it is the only 'Muscle era' Holden ute tagged to allow a 350 cubic inch Chevrolet Small Block V8, removing the need to get an engineer to sign off on modifications. Although, as a result, these utes are highly restricted in states such as Victoria, for P Plate drivers, although not surpassing legal power to weight limitations by a fair margin.

Holden introduced the Ute range with the VU, replacing the Holden VS Utility. The VU's arrival was a full 36 months after the VT Commodore sedan, meaning it arrived in time for the launch of Holden's VX Commodore series. The VU utilises the same wheelbase as the VT Commodore station wagon and WH Statesman/Caprice, meaning a wheelbase increase of The Ute employs the same interior as the Commodore, while also picking up the VX's upgraded equipment lists and re styled exterior design. Base : Built up from the Commodore Executive's specification. Available with 3.8 litre Ecotec V6 4sp auto, 5sp manual or 5.7 litre Generation 3 V8 6sp manual or 4sp auto
S : Based on Commodore 'S' specification. Available with 3.8 litre Ecotec V6 4sp auto, 5sp manual speed. SS : Based on Commodore SS specification, minus side impact airbags. Available with a 5.7 litre Generation 3 V8 6sp manual or 4sp auto
The range received a minor refresh with the VX Series 2 models 12 months later, with the major upgrade being an additional to Holden's Generation 3 V8's. In October 2001 The VU Ute came out in a special edition "SS Fifty" (pictured right) to mark the 50th anniversary. This model has only 500 units produced. Every SS 50 was identical in terms of color schemes, all 500 units were released with a black exterior and a partial leather interior that contained plenty of "hyper yellow" accents. Other items that made the SS 50 different were the chrome sports bar on the back, unique black and yellow engine cover, a leather wrapped steering wheel, handbrake cover and gear knob as well as a color coded instrument cluster to match the leather bolsters on the sports seats. The VU's were superseded by the VY range in September 2002.

The Ute range received its first major facelift in the form of the 2002 VY range. VY Ute's received the same upgrades as the sedan/wagon range, which involved a new, sharper designed nose, and more European styled interior. The same three specification models were carried over for the VY, and picked up the same upgraded equipment lists as the VY sedans. The VY range marked major change for Holden's Ute range, with the 2003 addition of two new models: the return of the One Tonner cab chassis utility after an 18 year hiatus; and the introduction of Holden's first ever 4 door utility, arriving in the form of the Crewman. The Crewman brought a longer wheelbase – compared to the of the Ute; and a shorter tray – compared to the of the Ute In December 2003, Holden released an all wheel drive variant of the Crewman known as the Crewman Cross 8. Powered by a V8 engine, the Cross 8 featured a modified appearance, more suited to an off road vehicle. Both the Crewman and One Tonner models added instant sales to the Holden range, sparking rapid expansion of the Holden Ute range, its first major growth spurt since its 1990 re introduction. Once again the same three specifications were carried over for the VY, with the Ute range available in base Ute, S & SS forms. The same did not apply for the One Tonner cab chassis range though – it was available in just two model forms, base and S.
Base: Based on Commodore Executive specification. Available with 3.8 litre Ecotec V6 – 4sp auto, 5sp manual
S : Based on Commodore S specification. Available with 3.8 litre Ecotec V6 – 4sp auto, 5sp manual
SS: Based on Commodore SS specification. 5.7 litre Generation 3 V8 – 4sp auto, 6sp manual

Crewman models were on the other hand available with the same three specifications as the Ute range, and were launched conjointly with the rest of Holden's VY Series 2 range, the major update this time being the addition of to the Gen.3 V8. By December 2003 the Crewman range had expanded to include Holden's very first AWD utility in the form of the Crewman Cross 8. The Cross 8 received bolstered wheelarches, raised ride height as well as additional equipment, with the sole drivetrain being the recently upgraded Gen.3 V8 connected to a 4 speed automatic. V6 powered versions of the One Tonner & Crewman were only available with automatic transmission. The VY's were superseded by the arrival of the VZ range in August 2004

2007 saw the launch of Holden's eagerly anticipated VE Ute range, unveiled to the media in August, with showroom sales began later in the month. The new generation designated VE, based on the VE Commodore tackles an upward consumer tendency towards using utes as lifestyle vehicles. This further shifts the ute away from the traditional workhorse market. Omega: The base model, having similar standard features to the Omega sedan but can carry more than the SS V, SS and SV6. It has the standard 3.6 litre V6 and The manual version of the Omega came with the 3.6 litre High Output V6 with and but only until the mid 2009 MY10 update. SV6: A sportier version of the V6 ute, the SV6 replaced the S pack from previous models. This Ute has the 3.6 litre High Output V6 with and Which has been recently updated to and engine. SS: The SS ute is the V8 version of the ute, it has the same 6 litre V8 as the sedan with and SS V: A higher spec edition of the SS and based on the SS V Sedan, it has a 6 litre V8 with and SS V Redline (Series II):A performance version of the SS V offering Brembo brakes, 19 inch Alloy wheels, FE3 Super Sports Performance Suspension and a mandatory tyre inflater kit. Unlike the previous VU–VZ generation, no double cab, cab chassis or AWD variants are offered.

The VF Ute was basically a modernization of the previous model, being almost the same visually to the casual observer. Production ended in 2017 when Holden stopped producing vehicles in Australia and the brand was focused only on imported models by other GM brands, this also lead to the discontinuation of its Commodore base and the Statesman/Caprice ranges. Holden's pickup then became solely the mid size Isuzu sourced Colorado until 2020 when the Holden brand was completely retired.

Starting in 1992, Holden's performance outfit, Holden Special Vehicles (HSV), built a performance version of the ute named the Maloo.