Alesis Digital Audio Tape, көбінесе ADAT деп аталатын, сегіз цифрлық аудио жолын тұтынушылардың VCR-лерінде қолданылатын S VHS таспасына жазуға арналған магниттік таспа форматы және Alesis компаниясының көпжолғы жазғыштар сериясының негізі болып табылады. Бастапқыда таспаға негізделген формат болғанымен, ADAT термині кейіннен Alesis ADAT HD24 сияқты қатты дискілік жазғыштарды да білдірді. 2004 жылы ADAT "қолжетімді жазба құралдарының революциясын бастағаны" үшін мойындалып, алғашқы TEC Awards TECnology Hall of Fame-ге енгізілді.
Alesis Digital Audio Tape, commonly referred to as ADAT, is a magnetic tape format used for the recording of eight digital audio tracks onto the same S VHS tape used by consumer VCRs, and the basis of a series of multitrack recorders by Alesis. Although originally a tape based format, the term ADAT later also referred to hard disk recorders like the Alesis ADAT HD24. In 2004, recognizing the ADAT for "beginning a revolution of affordable recording tools," it was inducted into the first ever TEC Awards TECnology Hall of Fame.
Тарих
Alesis компаниясы алғашқы ADAT моделін 1991 жылдың қаңтар айында Калифорния штатының Анахайм қаласында өткен NAMM көрмесінде жариялады, ал алғашқы ADAT жазғыштары бір жылдан кейін, 1992 жылдың ақпан немесе наурыз айларында сатылымға түсті. Бұл түпнұсқа ADAT моделі стандартты S VHS таспа картриджіне 16 биттік цифрлық аудионың 8 трегін жаздыратын. Сонымен қатар, 16 ADAT құрылғысын бір-бірімен қосып, үлгілік дәлдікпен 128 трекке дейін бір мезгілде жазуға болады. Бұл мүмкіндік және бастапқыда 3995 долларға сатылған ADAT-тың төмен құны 1990-шы жылдары жобалық студиялардың дамуына ықпал жасады. Alesis ADAT жазғыштарының бірнеше модельдерін шығарды. Түпнұсқа ADAT (кейін Blackface деп аталды) және ADAT XT үлгісіне 16 бит (ADAT I түрі) жазылады. Кейінгі буын машиналары – XT 20, LX 20 және M 20 – бір үлгіге 20 бит қолдайды (ADAT II түрі). Барлық ADAT машиналары бірдей жоғары сапалы S VHS таспаларын пайдаланады. Ескі I типті форматта жазылған таспаларды жаңа модельдерде оқуға және жазуға болады, бірақ керісінше емес. Жаңа буын машиналары 44.1 немесе 48 кГц үлгілік жиілікте жазуға қабілетті, бұл аудио индустриясында кең таралған. Үнді басқару үшін үлгі алу жылдамдығын өзгертуге және оған сәйкес таспа жылдамдығын реттеуге болады. Белгілі бір нүктелерді сақтап, таспаға үлгілік дәлдікпен орналасу координаттарын енгізуге болады, бұл сандық жазбалардың нақты бөлімдерін табуды жеңілдетеді. Автоматты ойнату және жазу функцияларын пайдалану арқылы, адамның уақытты дұрыс анықтау қабілетіне тәуелді болмай, алдын ала белгіленген нүктелерде жазуды бастау және тоқтату мүмкін болды. ADAT машиналары сыртқы Alesis LRC (Little Remote Control) пультімен басқарылуы мүмкін, ол 1/4 дюймдік ұңғыма/жеңдік қосылысы арқылы ADAT-қа қосылады және тасымалдау басқару элементтері мен ең көп қолданылатын функцияларды қамтиды. Сонымен қатар, BRC (Big Remote Control) пультін де пайдалануға болады, ол жеке ADAT құрылғысында жоқ көптеген қосымша мүмкіндіктерге ие.
Alesis announced the first ADAT model at the NAMM Show in Anaheim, California in January 1991, with the first ADAT recorders shipping over a year later in February or March 1992. This original ADAT model recorded up to 8 tracks of 16 bit digital audio on a standard S VHS tape cartridge. Additionally, up to 16 ADATs could be connected to each other to record up to 128 tracks simultaneously with sample accurate timing. This capability and the ADATs low cost, originally introduced at $3995, were largely responsible for the rise of project studios in the 1990s. Alesis produced several models of ADAT recorders. The original ADAT (later referred to as Blackface) and the ADAT XT record 16 bits per sample (ADAT Type I). A later generation of machines—the XT 20, LX 20 and M 20—support 20 bits per sample (ADAT Type II). All ADAT machines use the same high quality S VHS tape media. Tapes recorded in the older Type I format can be read and written in the more modern machines, but not the other way around. Later generations are capable of recording at a sample rate of either 44.1 or 48 kHz, common in the audio industry. Pitch control is available by varying the sample rate, and thus tape speed accordingly. With locate points it was possible to store sample exact positions on tape, making it easy to find specific parts of digital recordings. Using auto play and auto record functions made it possible to punch in/out at predetermined points, rather than relying on human timing ability to start and stop recording at precisely the right instant. ADAT machines could be controlled externally with the Alesis LRC (Little Remote Control), which could be attached to the ADAT with a 1/4" tip/sleeve plug, and featured the transport controls and most commonly used functions. Alternatively, the BRC (Big Remote Control) could be used, which included many more features which the stand alone ADAT did not have.