Фаирфилд: История шотландской судостроительной компании

Scottish shipbuilding company

The Fairfield Shipbuilding and Engineering Company, Limited, was a Scottish shipbuilding company in the Govan area on the Clyde in Glasgow. Fairfields, as it is often known, was a major warship builder, turning out many vessels for the Royal Navy and other navies through the First World War and the Second World War. It also built many transatlantic liners, including record breaking ships for the Cunard Line and Canadian Pacific, such as the Blue Riband winning sisters RMS Campania and RMS Lucania. At the other end of the scale, Fairfields built fast cross channel mail steamers and ferries for locations around the world. These included ships for the Bosporus crossing in Istanbul and some of the early ships used by Thomas Cook for developing tourism on the River Nile.

Charles Randolph founded the company as Randolph & Co. He had been an apprentice at the Clyde shipyard of Robert Napier, and at William Fairbairn & Sons in Manchester. With the knowledge that he acquired, he started as a millwright in partnership with his cousin Richard S. Cunliff, who managed the commercial side. By 1834 it built engines and machinery in the Tradeston district of Glasgow. It was the first serious local manufacturer of cog and other large wheels for driving machinery, and soon became famous for accuracy. In 1839 Mr Elliott joined the firm and it became known as Randolph, Elliott & Co. Elliott died shortly after becoming a partner.

In 1852 the company became Randolph, Elder and Company when John Elder (1824 1869) joined the business. Elder had a natural talent for engineering and had also worked at the Napier shipyard. It enabled the company to start diversifying into marine engineering. In this field, the company would acquire world fame. Its skills in this field also enabled it to become one of the biggest shipbuilders in the world. The story is closely connected to the application of the compound steam engine for marine use, in which the firm played a crucial role. With regard to the compound engine two specific phases can be discerned: 'low' pressure compound engines and 'high' pressure compound engines. The compound engine with low (as it would later be called) pressure would give Randolph, Elder and Co its first renown for economic compound engines. The company's attempts centred on trying to prevent energy loss due to friction and premature condensation of steam. In July 1854 the screw steamer Brandon was fit with engines by Randolph, Elder & Co. It had a vertical geared compound engine with a patented (January 1853) arrangement of the cylinders. The crankshaft was turned by two opposite cranks (arms). One was driven by the high pressure cylinder, the other by the low pressure cylinder, with the pistons always moving in opposite directions. Brandon, a vessel of about 800 tons and 800 ihp made her trials in July 1854. She had a coal consumption of about 3.25 lbs per ihp per hour. At the time the lowest rate of consumption in other steamers was about 4 4.5 lbs per ihp per hour. The merits of the engine of Brandon were not enough to persuade others, and from 1854 till about 1866 Randolph, Elder and Co were the only engineers who made compound engines under their various patents. The Pacific Steam Navigation Company did become an enthusiastic customer. In 1855 1856 it operated on the west coast of South America. In that area, fuel was imported from Britain and therefore more costly. When the Crimean War broke out, freight tariffs increased to the point that the price of coal almost doubled there. The directors then conferred with the company, resulting in the 'double cylinder engine'. Inca and Valparaiso were paddle steamers which got this engine, that got patented in March 1856. Construction of that for Inca was started in May 1856. It had two pairs of cylinders, lying so their piston rods were at a 60 90 degree angle. Each pair consisted of a high and low pressure cylinder lying next to each other, so they could easily exchange steam. Their pistons moved in opposite directions and drove one crank, which was attached to the crankshaft opposite the crank of the other pair. This gave the optimal balance of driving forces that could be attained for this number of cylinders. Furthermore, the cylinders were 'jacketed' at the top and bottom. The jacket heated the cylinder from the outside to prevent condensation in the cylinder. It had been invented by James Watt, but the company was the first to re apply it, probably because it first understood its purpose. The company then supplied more double cylinder engines, but with the cylinders completely jacketed. Admiral by Robert Napier, made her trial in June 1858. Another ship with the same engine was Callao built by John Reid in 1858. On trials fuel consumption for these ships was: Inca 2.5 lbs/ihp/h, Callao 2.7 lbs/ihp/h, Valparaiso and Admiral 3 lbs/ihp/h. It amounted to a saving of 30 40 per cent, and this was maintained later on. It made it possible to continue steam navigation on the Pacific Ocean with profit. In fact, in 1858 the Pacific Steam Navigation Company had 7–8 years old traditional machinery removed from three of her large steamers, and replaced by compound engines. It saved 40% in fuel and 30 feet of space amidships because less space was needed for coal. From 1854 till about 1866 Randolph, Elder & Co. constructed 18 sets of paddle engines and 30 sets of screw engines, all compound. A highlight was the conversion of the frigate HMS Constance to steam propulsion in 1863, and her race against two frigates with engines by John Penn and Sons and Maudslay, Sons and Field. In 1860 the company started to use surface condensation instead of the jet condenser. In 1862 it increased steam pressure to 40 lbs per square inch.

In 1858 the company acquired the Govan Old Shipyard, his wife ran the business for a while and renamed it in his honour. In 1869 she sold the company to a new partnership consisting of her brother John Francis Ure (1820 1883), J. L. K. Jamieson (1826 1883) and Sir William Pearce. It kept the name John Elder & Co. William Pearce became sole partner in 1878. The new owners continued the expansion of the shipyard in 1870 and onwards. Important customers in the 1861 1875 time slot were: the Pacific Steam Navigation Company for 40 vessels at 2,500,000 GBP, the African Mail Company and British and African Steam Navigation Company for 16 vessels at 500,000 GBP and Stoomvaart Maatschappij Nederland for 8 vessels at 600,000 GBP. Some qualitative notes further explain the leading position of the company at the time. In 1870 it launched Italy, a vessel of 400 feet, 4,200 tons gross measurement and 600 nominal hp. The largest vessel then afloat except for Great Eastern. In 1870 1871 it built two steamers for the London to Aberdeen line: City of London and Ban Righ were about 20% faster than their predecessors, while their fuel consumption was less than half of theirs. In 1871 Tagus and Moselle were launched for the Royal Mail Company's West India and Brazil trade. Both big steamers almost reached 15 knots on their trials. In 1873 it launched Iberia of 4,820 tons and 650 hp, the second largest merchant steamer then afloat. In 1871 HMS Hydra was launched with engines by John Elder.

In 1886 William Pearce converted the firm to a limited company, the Fairfield Shipbuilding & Engineering Co. The fire spread rapidly and within ten minutes the vast majority of the buildings, covering several acres, were ablaze with the joiner's, pattern, and fitting shops totally destroyed. The company also established the Coventry Ordnance Works joint venture with Yarrow Shipbuilders and others in 1905. Sir Alexander Gracie, who was born in Dunvegan, worked at various other Clydeside shipbuilders before he started at Fairfield in 1896, where amongst other things he worked with Jack Fisher to develop the Invincible class for the Royal Navy, including the Indomitable, which was built at Fairfield. In 1909 Sir Alexander became chairman and managing director of the company, posts he held for a decade. Fisher described him as Britain’s greatest naval architect. He died in 1933. Dorothy Rowntree, the first woman in UK to qualify in naval architecture and to graduate in engineering from the University of Glasgow worked for the company between 1926 and 1928. The Fairfield Titan was built for the yard in 1911 by Sir William Arrol & Co., with a maximum lift capacity of 200 tons. It was acknowledged for many years as the largest crane in the world. It was employed in lifting the engines and boilers aboard ships in the fitting out basin. The crane was a Category B listed building but was demolished in 2007 in yard modernisation works.

In 1919 the company became part of the Northumberland Shipbuilding Company, with Alexander Kennedy installed as managing director. In 1921 Alexander Kennedy was knighted. Sir Alexander became Fairfield chairman in 1930 and remained so until 1937. The Fairfield West Yard had been added at the outbreak of the First World War for submarine construction, but closed after ten years due to severe recession and was demolished by National Shipbuilders Securities in 1934. The Fairfield West yard site was later used by the United States Army Corps of Engineers in 1944 to build four landing craft. In 1924, the company bought a shipyard at Chepstow on the River Wye in South Wales, previously developed as National Shipyard No.1 in the First World War and then taken over by the Monmouthshire Shipbuilding Company. The works later specialised in assembling bridges and other major structures.

In 1935 Fairfield was taken over by Lithgows of Port Glasgow after it had become entangled with the insolvency of the Anchor Line. The marine engine building subsidiary Fairfield Rowan was closed in 1966.

The recently modernised shipbuilding operation was reconstituted as Fairfield (Glasgow) Ltd in 1966, under its founding chairman and industrialist Sir Iain Maxwell Stewart who was also chairman of Thermotank Ltd. It became known as the famous Fairfield Experiment, into new ways of improving productivity through new reforms to industrial relations and the application of scientific management methods to improve productivity. The era of the Fairfield experiment was captured by Sean Connery in his documentary The Bowler and the Bunnet.

In 1968 the company was made part of Upper Clyde Shipbuilders, which collapsed in 1971 when a strike and work in received national press attention. As part of the recovery deal, Fairfields was formed into Govan Shipbuilders in 1972, which was itself later nationalised and subsumed into British Shipbuilders in 1977.