Nikon F2: Профессиональная плёночная камера

Camera model

The Nikon F2 is a professional level, interchangeable lens, 35 mm film, single lens reflex (SLR) camera. It was manufactured by the Japanese optics company Nippon Kogaku K. K. (Nikon Corporation since 1988) in Japan from September 1971 to 1980. It used a horizontal travel focal plane shutter with titanium shutter curtains and a speed range of 1 to 1/2000 second (up to 10 seconds using the self timer) plus Bulb and Time, and flash X sync of 1/80 second. It had dimensions (with DE 1 head, see below) of 98 mm height, 152.5 mm width, 65 mm depth and 730 g weight. It was available in two colors: black with chrome trim and all black. The F2 was adopted by both casual photographers and professional photographers, the latter of those especially photojournalists covering the later half of the Vietnam War. The F2 is the second member of the long line of Nikon F series professional level 35 mm SLRs that began with the Nikon F (manufactured 1959–1974) and followed each other in a sort of dynastic succession as the top of the line Nikon camera. The other members were the F3 (1980–2001), F4 (1988–1996), F5 (1996–2005) and F6 (2004–2020). The F series do not share any major components except for the all important bayonet lens mount ('F mount'). All Nikon professional F series SLRs are full system cameras. This means that each camera body serves as only a modular hub.

The Nikon F2 is an all metal, mechanically controlled (springs, gears, levers), manual focus SLR with manual exposure control. The camera itself needed no batteries, though the prism light meter did (and the motor drive if added). The F2 replaced the Nikon F, adding many new features (a faster 1/2000 second maximum shutter speed, a swing open back for easier film loading, a wider assortment of detachable finders and metering heads, a 250 exposure film back, a larger reflex mirror to ensure no vignetting, and a shutter release nearer the front of the camera for better ergonomics). It also offered a detachable motor drive, something the F only had as a custom modification. It was the last all mechanical professional level Nikon SLR.

The F2 accepts all lenses with the Nikon F bayonet mount (introduced in 1959 on the Nikon F camera), with certain limitations or exceptions depending on the F2 version. The later F2A and F2AS Photomic variants (see below) require lenses supporting the Automatic maximum aperture Indexing (AI) feature (introduced in 1977). The manual focus Nikon made AI lenses were the Nikkor AI S, Nikkor AI and Nikon Series E types. The AF S Nikkor, AF I Nikkor, AF Nikkor D and AF Nikkor autofocus lenses are also AI types. The original Nikkor "non AI" (introduced before 1977) lenses, will mount but require stop down metering. Nikon had a service to retrofit non AI lenses with a new aperture ring with the AI feature to produce "AI'd" lenses, but this service ended decades ago. The older F2, F2S and F2SB Photomic variants (see below) require lenses with a "meter coupling shoe" (or prong, informally called "rabbit ears" by photography enthusiasts). These lenses are the Nikkor non AI, AI'd Nikkor, Nikkor AI and Nikkor AI S types. Lenses without rabbit ears, such as the Nikon Series E, AF Nikkor, AF Nikkor D, AF I Nikkor and AF S Nikkor types, will mount but require stop down metering. The F2 with plain/eye level DE 1 prism (no light meter; see below) will work with either lens types. Note that the Nikkor AI S and Nikkor AI types are AI types plus have rabbit ears and will function properly on all Nikon F2 variants. Nikon's most recent 35mm film SLR lenses, the AF Nikkor G type (2000) lacking an aperture control ring; and the AF Nikkor DX type (2003) with image circles sized for Nikon's DX digital SLRs, will mount but will not function properly. A few exotic fisheye lenses from the 1960s require mirror lock up and therefore an auxiliary viewfinder is preferred. IX Nikkor lenses (1996), for Nikon's Advanced Photo System (APS) film SLRs, must not be mounted on any F2, as their rear elements will intrude far enough into the mirror box to cause damage even with the mirror locked up. In 1977 Nikon made about 55 non AI and AI lenses, ranging from a Fisheye Nikkor 6 mm f/2.8 220° circular fisheye to a Reflex Nikkor 2000 mm f/11 super long mirror telephoto. This was the largest lens selection in the world by far. The standard lens for most professionals was the Nikkor 50 mm f/1.4, but some preferred the Nikkor 35 mm f/2 with a wider field of view for grab shots. The Nikkor 105 mm f/2.5 was renowned for its superb sharpness and bokeh and was a favorite for head and shoulders portraits ("head shots"). Special purpose lenses included the Micro Nikkors 55 mm f/3.5 and 55 mm f/2.8, Micro Nikkor 105 mm f/4 for close up "macro" photography, the Noct Nikkor 58 mm f/1.2 for low light photography, the PC Nikkor 28 mm f/3.5 shifting perspective control lens, the GN Nikkor 45 mm f/2.8 for automatically setting the proper aperture for flash exposure based on distance (also useful as a very small/light "pancake" lens), the Nikkor 13mm f/5.6 widest angle (118°) rectilinear lens for SLRs ever made, the Nikkor 300 mm f/2.8 ED IF fast telephoto useful for sports and wildlife photography, the versatile, but heavy Zoom Nikkor 50–300 mm f/4.5 ED and the quick framing, but notoriously middling optical quality Zoom Nikkor 43–86 mm f/3.5. There were innumerable independent manufacturer lenses available in the Nikon F mount. The most famous was probably the Vivitar Series 1 70–210 mm f/3.5 Macro Zoom (released 1974), the first independent zoom lens to meet most professional photographers' quality standards.

The F2's interchangeable viewfinders (also known as "heads") marked it as a professional level SLR and was considered by consumers one of its biggest strengths. By providing updated heads every few years, Nikon was able to introduce new versions of the F2 and keep the basic body in the latest technology until production ended in 1980. Note that F2 heads were often sold separately from the body, mostly in black finish with about 10% in chrome, and it is therefore not unusual to see body/head combinations with mismatched serial numbers and/or colors. The head on the basic Nikon F2 was called the Nikon DE 1. It provided a virtually 100% accurate viewing image, but was a plain pentaprism eyelevel viewing head with no built in light meter and so had no metering or exposure information display, except for a flash ready light. Unlike the other heads, about 90% of DE 1s were chrome finished. It was unpopular because of the lack of a built in meter, but remained available for the life of the F2. F2 bodies with DE 1 finders maintain the highest prices on the secondary market. If a pentaprism head with a built in light meter was mounted on the F2, the camera became an F2 Photomic. However, since Nikon made five different metering heads over the life of the F2, there were five different F2 Photomic versions. The use of any Photomic head requires that batteries (two S76 or A76, or SR44 or LR44) be installed in the F2 body to power the head's electronics. The original Nikon F2 Photomic, packaged with the Nikon DP 1 head, was manufactured from 1971 to 1977. The DP 1 had a center the needle exposure control system using a galvanometer needle pointer moving between horizontally arranged +/– over/underexposure markers at the bottom of the viewfinder to indicate the readings of the built in 60/40 percent centerweighted, cadmium sulfide (CdS) light meter versus the photographer's actual camera selections. Flanking the needle array on the left and right were a readout of the camera set f stop and shutter speed, respectively. The needle array was duplicated on the top of the DP 1 head to allow exposure control without looking through the viewfinder. A Nikon F2 Photomic with Nikkor S 50 mm f/1.4 lens had a US list price of $660 in 1972. Note that SLRs usually sold for 30 to 40 percent below list price. Manufactured from 1973 to 1977, the F2S Photomic used the DP 2 head. Although it looked very different, the DP 2 was functionally very similar to the DP 1. It substituted an all solid state light both LEDs exposure control system using two arrow shaped light emitting diode (LED) over/underexposure indicators for better visibility in low light situations and better overall reliability. This was important, because the DP 2's CdS meter had better low light sensitivity than the DP 1—down to Exposure Value (EV) −2, instead of EV 1, at ASA 100. A chrome Nikon F2S Photomic with Nikkor 50 mm f/1.4 lens had a US list price of $961 in 1976. Note: SLRs were usually discounted 30 to 40 percent from list. With the DP 3 head, the camera became the F2SB Photomic, available 1976 to 1977. The DP 3 introduced three innovations: a silicon photodiode light meter (a first for Nikon SLRs) for faster and more accurate light readings, a five stage center the LED exposure control system using +/o/− LEDs, and an eyepiece blind. These three early Photomic heads required Nikon F mount lenses with a meter coupling shoe ("rabbit ears", see above). Rabbit ear lenses required a special mounting procedure. After mounting, the lens aperture ring must be turned back and forth to the smallest aperture (largest f stop number) and then to the largest aperture (smallest f stop number) to ensure that the lens and the head couple properly (Nikon called it indexing the maximum aperture of the lens—users called it the Nikon Shuffle) and meter correctly. This system seems unwieldy to today's photographers, but it was second nature to Nikon and Nikkormat camera using photographers of the 1960s and 1970s. The F2A Photomic came with the DP 11 head; the F2AS Photomic used the DP 12 head. The DP 11 and DP 12 (both introduced in 1977) functioned exactly the same as the DP 1 and DP 3, respectively, except that these heads supported Nikkor lenses with the Automatic Indexing (AI) feature (introduced 1977, see above). Nikkor AI lenses had a "meter coupling ridge" cam on the lens aperture ring that pushed on a spring loaded "meter coupling lever" on the Photomic head to transfer aperture setting information. AI lenses enabled lenses to be mounted without having to align the lens with the camera body's "rabbit ears". The F2AS Photomic (DP 12 head) was the most advanced F2 version and the chrome version with Nikkor AI 50 mm f/1.4 lens had a US list price of $1,278 in 1978. (SLR selling prices were typically 30 to 40 percent below list.) The F2S Photomic (DP 2 head) and F2SB Photomic (DP 3 head) also accepted the unusual Nikon DS 1 or DS 2 EE Aperture Control Units. The F2AS (DP 12) required the equivalent DS 12. These were early attempts by Nikon to provide shutter priority autoexposure by having an electric servomotor automatically turn the lens aperture ring in response to the set shutter speed and light meter reading. The DS 1, 2 and 12 were bulky, slow and unreliable, and were feeble and inelegant attempts to add autoexposure to the manual exposure F2. There were also three special purpose meterless heads available for the F2: the Nikon DW 1 waist level finder (a non pentaprism head; look down directly at the mirror reversed image on the focusing screen), the DA 1 action finder (providing 60 mm of eye relief; extremely large exit pupil that can be viewed while wearing face masks, safety goggles, etc.) and the DW 2 6X magnifying finder (waist level finder with magnifier; good for precise focusing).

Major accessories for the F2 included the Nikon MD 1 (introduced in 1971) and MD 2 (1973) motor drives, providing automatic film advance up to 5 frames per second, 6 if the mirror was locked up, plus power rewind. They both required a Nikon MB 1 battery pack holding 10 AA or LR6 batteries in two Nikon MS 1 battery clips. Note that the 5 frame/s rate required that the F2 have its mirror locked up and the MD 1 or 2 be loaded with two Nikon MN 1 nickel cadmium rechargeable batteries. (These batteries are long since dead.) With the mirror operating, the maximum advance rate is 4.3 frame/s; with AAs, the rate is 4 frame/s. The addition of the MD 1 or MD 2 greatly increased the overall weight of the camera. With a fully loaded MD 2/MB 1 and 50mm lens, the F2 would weigh in at just over six pounds. The F2 also accepted the lighter, cheaper and less capable Nikon MD 3 motor drive. The MD 3 did not have power rewind and had an advance rate of 2.5 frame/s with the standard MB 2 battery pack holding 8 AA or LR6 batteries. Optionally, it could reach 3.5 frame/s with an MB 1 battery pack with 10 AA or LR6 batteries; 4 frame/s with MB 1 and MN 1 nicad battery. The F2 could also mount the Nikon MF 1 (33/10 feet/meters film = 250 frames; required two Nikon MZ 1 film cassettes) and MF 2 (100/30 feet/meters film = 750 frames; required two MZ 2 film cassettes) bulk film backs. These were very useful if a photographer had a motor drive mounted and needed to take more than seven seconds' worth of photographs. Note that the MF 2 and its MZ 2 cassettes are very rare. Starting in 1976, Nikon introduced the Nikon Speedlight SB 2 (guide number 82/25 (feet/meters) at ASA 100), SB 5 (guide number 105/32 (feet/meters) at ASA 100), SB 6 (guide number 148/45 (feet/meters) at ASA 100) and SB 7E (guide number 82/25 (feet/meters) at ASA 100) electronic flashes. Note that the F2 did not use a standard ISO hot shoe to mount flash units. Instead, the SB 2, 6 and 7E mounted in a unique to Nikon F and F2 hot shoe surrounding the film rewind crank. Manually rewinding film could not be done with a flash mounted in this shoe because the flash blocked the crank. Standard ISO foot flashes can be connected to the Nikon shoe via the Nikon AS 1 Flash Unit Coupler. The Nikon ML 1 Modulite was a wireless infrared remote controller with a 200/60 feet/meters line of sight range. It was a two part device: a handheld transmitter plus a camera mounted receiver. Note that the receiver needed to be connected to a motor drive. The Nikon MW 1 was a similar device, but was larger and more powerful and used radio signals for a longer 2300/700 feet/meters obstructed view range. The MW 1 could also control three separate F2s by broadcasting three different codes. The Nikon MT 1 intervalometer allowed completely untended time lapse photography. It could fire the F2 for a specific number of frames at a particular shutter speed at set time intervals. Nippon Kogaku also made scores of minor accessories for the F2, such as straps, cases, bags, remote firing cords, eyecups, eyepiece correction lenses, supplementary close up lenses, lens hoods, filters and cases. In 1978 the complete Nikon photographic system of cameras, lenses and accessories totaled nearly 450 items priced in excess of US$110,000—the most extensive and expensive in the world.

There were several special purpose versions of the F2 manufactured in small numbers. They are considered rare collector's items. The F2T was a special ultra rugged version of the F2 (DE 1 head) with titanium bayonet mount, top and bottom plates, and camera back, plus a special DE 1T titanium covered meterless prism head, sold in parallel with the regular F2s from 1978 to 1980. Most F2Ts were given a special textured black finish but a very few came in natural titanium finish, including the first F2Ts and the very last F2s ever manufactured. Their serial numbers began with '92', e. g., "F2 9201544.' The F2 Titan was a black only late variant of the F2T, distinguished by the word "Titan" engraved in Roman script on the front of the camera below the shutter release. They carry the number 79 in front of the serial number. The H in the F2H of 1978 denoted "High Speed". It was yet another titanium armored F2 but this time with a fixed (not reflex), semi silvered, pellicle mirror, manual lens diaphragm control and a mechanically matched titanium armored Nikon MD 100 high speed motor drive. The maximum shutter speed is 1/1000 (vs. 1/2000 for other F2 models). The self timer and shutter settings 'B' and 'T' were omitted. The depth of field preview button was replaced with a 'Full Aperture Viewing Button'. The Nikon MD 100 motor drive was a modified version of the MD 2 motor drive and was powered by the Nikon MB 100. The MB 100 consists of two MB 1 battery packs (20 AA or LR6 batteries, or four Nikon MN 1 nickel cadmium rechargeable batteries, providing 30 volts), weighing a massive 960 g empty and reaching 10 frames per second film advance rate. The F2H set included the Nikon MH 100 battery charger. All components (body, motor and batterypack) may be detached from each other. The bodies (7 digit serial number) and motordrives (6 digit serial number) do not have matching serial numbers, contrary to often repeated misinformation. Body serial numbers began with 7850001, e. g. 'F2 7850001'. Approximately 400 units were produced making the F2H extremely rare, the rarest of any 'production model' F2, and valuable. As the name implies, the F2 Data had a primitive data back. It used a tiny internal flash unit to imprint the time, date or sequential number on the film. This data back recorded the time by imprinting a tiny picture of a slightly less tiny Seiko made analogue clock onto the film. It also had a special insert plate that the photographer could write on and have this note imprinted on the film. There were two versions of the F2 Data: one with the MF 10 camera back for standard 35 mm film cartridges and one with the MF 11 250 frame bulk film back. The F2 Data also came packaged with an MD 2 motor drive and your choice of DE 1, DP 11 or DP 12 head plus a special Type S focusing screen that marked the left side data imprint area. F2 Data bodies carry the numbers '77' in front of the serial number. Approximately 5,000 units were produced. Finally there was the F2A Anniversary model. This was marketed as a collector's item of 4,000 specially numbered bodies intended to commemorate the 25th anniversary of Nikon cameras in the USA. A plate was glued to the front of the camera below the shutter release noting, "25th Anniversary" (which has fallen off many bodies) and came in a special silver colored box. The F2A Anniversary was not authorized by Nikon; it was the creation of the American importer, Ehrenreich Photo Optical Industries (EPOI).

Because of the F2's durability, because there were so many manufactured (816,000 units) and because film SLRs have been largely replaced with digital equivalents in many markets, the F2 is still relatively common today and is available on the used market for low prices—US$200–400 depending on the head. However, these may be well worn examples used by professional photographers and are generally in mediocre condition. The Nikon F2 is also collectable. If a pristine F2 body and head with date compatible serial numbers is found, it will carry collector's items price tags. The black body version of the F2AS model, in near new condition, can exceed $1,100 at auction. The F2 has become a popular “affordable” alternative to similarly regarded cameras from the same era, such as the Leica M series cameras. Several modern photographers, such as YouTuber Christopher Sturm (The Photo Dept.) point out the F2’s rugged durability and reliability as a true counterpoint to the extremely popular Leica M6.