Протокол управления сетью ARPANET (NCP)

Obsolete ARPANET network protocol
the ARPANET Network Control Protocol and Program

The Network Control Protocol (NCP) was a communication protocol for a computer network in the 1970s and early 1980s. It provided the transport layer of the protocol stack running on host computers of the ARPANET, the predecessor to the modern Internet. NCP preceded the Transmission Control Protocol (TCP) as a transport layer protocol used during the early ARPANET. NCP was a simplex protocol that utilized two port numbers, establishing two connections, for two way communications. An odd and an even port were reserved for each application layer application or protocol. The standardization of TCP and UDP reduced the need for the use of two simplex ports for each application down to one duplex port. There is some confusion over the name, even among the engineers who worked with the ARPANET. Originally, there was no need for a name for the protocol stack as a whole, so none existed. When the development of TCP started, a name was required for its predecessor, and the pre existing acronym 'NCP' (which originally referred to Network Control Program, the software which implemented this stack) was organically adopted for that use. Eventually, it was realized that the original expansion of that acronym was inappropriate for its new meaning, so a new quasi backronym was created, 'Network Control Protocol' again, organically, not via a formal decision.

NCP was first specified and described in the ARPANETs earliest RFC documents in 1969 after a series of meetings on the topic with engineers from UCLA, University of Utah, and SRI. It was finalized in in early 1970, and deployed to all nodes on the ARPANET in December 1970. It remained in use until the end of 1982; see Flag Day below. NCP provided connections and flow control between processes running on different ARPANET host computers. Application services, such as remote login and the file transfer, would be built on top of NCP, using it to handle connections to other host computers. On the ARPANET, the protocols in the physical layer, the data link layer, and the network layer used within the network were implemented on separate Interface Message Processors (IMPs). The host usually connected to an IMP using another kind of interface, with different physical, data link and network layer specifications. The IMP's capabilities were specified by the Host/IMP Protocol in BBN Report 1822. Since lower protocol layers were provided by the IMP host interface, NCP essentially provided a transport layer consisting of the ARPANET Host to Host Protocol (AHHP) and the Initial Connection Protocol (ICP). AHHP defined procedures to transmit a unidirectional, flow controlled data stream between two hosts. The ICP defined the procedure for establishing a bidirectional pair of such streams between a pair of host processes. Application protocols (e. g., FTP) accessed network services through an interface to the top layer of the NCP, a forerunner to the Berkeley sockets interface. Stephen D. Crocker, then a graduate student at UCLA, formed and led the Network Working Group (NWG) and specifically led the development of NCP. Other participants in the NWG developed application level protocols such as TELNET, FTP, and, in the 1980s, SMTP, among others.

Network Control Program (usually given as NCP) was the name for the software on hosts which implemented the Network Control Protocol of the ARPANET.