Швецияның Kpist m/45 автоматтары

the submachine gun

The Kulsprutepistol m/45 (Kpist m/45), also known as the Carl Gustaf M/45 and the Swedish K SMG, is a 9×19mm Swedish submachine gun (SMG) designed by Gunnar Johansson, adopted in 1945 (hence the m/45 designation), and manufactured at the Carl Gustafs Stads Gevärsfaktori in Eskilstuna, Sweden. The m/45 was the standard submachine gun of the Swedish Army from 1945 to 1965. It was gradually replaced in Swedish service by updated Ak 4 battle rifles and Ak 5 assault rifles. The last official user of the m/45, the Swedish Home Guard (Hemvärnet), retired it from service in April 2007. The m/45 SMG was developed in 1944–45, with a design borrowing from and also improving on many design elements of earlier submachine guns. The sheet metal stamping techniques used in making the German MP 40, the British Sten, and the Soviet PPSh 41 and PPS 43 were studied in detail. Two designs were tested in 1944, one from Carl Gustafs Stads Gevärsfaktori and one from Husqvarna Vapenfabriks and the prototype from Carl Gustafs Stads Gevärsfaktori was chosen for further development. The first production version was adopted in 1945 as the Kpist m/45. The Danish Hovea M/49 SMG, although similar in appearance, is not a version derived from the m/45. The Hovea was a development of the failed test contender (fm44) from Husqvarna.

The standard m/45 is a fully automatic only weapon without any option for semi automatic fire. It weighs 3.3 kg (7.3 lbs.) unloaded, and 4.2 kg (9.25 lbs.) loaded with a 36 round box magazine. It is 808 mm (31.8 in.) long with the stock extended, and 550 mm (21.7 in.) long with the stock folded. The m/45 is an open bolt design with a fixed firing pin. The relatively slow cyclic rate of fire (550–600 rds/min.) and low recoil of the bolt mechanism actuation (straight blowback) makes it easy to control during full automatic fire. Single shots are also easy to achieve (with very little training) by letting go of the trigger before another round is cycled. The m/45 is fairly accurate up to 200 meters. Accessories include a special sub calibre barrel (painted silver) for firing blanks and low powered gallery ammunition. When firing blanks, a cone shaped blank firing adapter must be attached to the threaded muzzle of the sub calibre barrel (and secured by a clip) to ensure the mechanism has adequate pressure for its blowback operation. Other accessories include night sights (wartime use only) that attach to the fixed day sights (f: protected post, r: L type), a brass catcher for collecting spent cartridges (peacetime use only, for reloading and recycling), a quick detachable (by attached cord) ejection port cover (painted bright red) for guard duty which secures the bolt from accidental firing, and a magazine loader that loads a magazine from a cartridge tray in seconds. The m/45 was also issued with a standard cleaning kit containing a threaded cleaning rod, threaded jag and a container for the jag, lubricant and cleaning patches. The standard sling issued was made of leather, attached to the rear left receiver and left barrel sleeve sling bars. The 36 round straight detachable staggered row box magazine is wider at the rear than at the front, the extra space allows the tapered 9mm Parabellum cartridges to feed more efficiently. The trapezium design makes the magazine very reliable in dusty environments and sub zero temperatures, because magazines of parallel side design are more likely to jam under adverse conditions. The magazine was used post war by Finland in the m/31 Suomi under the designation m/54, a distinguishing feature of the variation m/55 (made by Lapua) is a steel wire carrying loop mounted at the bottom front edge. The basic design idea of the m/45 magazine was also used for the magazines of the Czech model 23 and model 25 and the French MAS submachine guns. The m/45 has no safety switch. Instead the m/45 is put in "safe" by sliding the cocking handle into a short side slot above the main (lock) slot. In the example US Army photograph, this short safety side slot is visible behind the rear L sight. When the m/45 is unloaded the bolt is locked in place in the bolt forward position by pushing the cocking handle inwards, engaging a hole in the lower left receiver wall.

First production: the SMG models Kpist m/45 and Kpist m/45S (integrated suppressor, never used in Sweden) featured a detachable (via removable clip) magazine support. It accepted the kpist m/37 39 50 round "coffin" magazine and the later standard 36 round box magazine. UN/ONU and Ceremonial: the m/45C is an m/45B with a bayonet mount on the barrel sleeve which was used for parade and guard duties. During the Congo Crisis in the 1960s, the Swedish UN forces used the C version extensively. The standard m/45 and m/45B have no bayonet mount. The simplified sights of the Akaba were moved to the front (unprotected post) and back (protected peep) of the receiver.

During the Vietnam War, the US Navy SEALs used the m/45 extensively. One of the gun's qualities which appealed to the US Navy was that the m/45 can fire almost immediately out of the water (over the beach). It also saw use by CIA operatives and advisers. In US service it was largely known as the "Swedish K" or "K Rifle". The US Navy was so impressed by the m/45 that when Sweden embargoed the export of weapons to the United States in 1966, Smith & Wesson was given the task of producing a copy. This was designated the Smith & Wesson M76. However, by the time the M76 was ready for combat deployment, the US Navy interest had largely evaporated. Many of the m/45s used by US forces and agencies were devoid of markings, implying clandestine use ("sanitized").

In 1975, the Junta de Coordinación Revolucionaria, a Cuban backed far left internationalist organization, established a clandestine military factory in Buenos Aires. Although it was easy to produce explosives, there was a severe lack of materials to make firearms. In order to revert this, a Bolivian engineer, nicknamed "Comrade N", aiming to design "a submachine gun with the characteristics of an Uzi, but easier to build and disassemble and using 9mm ammunition" came out with the JCR 1. It was presented by the Argentinian People's Revolutionary Army through its newspaper Estrella Roja as a lightweight and concealable weapon. Approximately 5,000 units were manufactured, though only a few hundred could be assembled until the Argentine Army dismantled the factory in late 1975.