Тас дәуіріндегі қырыптастар: қолөнерге, ағаш өңдеуге арналған бір жақты құралдар. Түрлері: ұштар, бүйірлік, тіліктелген қырыптастар. Қолданылуы мен жасалуы туралы ақпарат.
Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
Тарихқа дейінгі құрал түрі
Prehistoric tool type
Тарихқа дейінгі археологияда сырғыштар – тері өңдеу және ағаш өңдеу үшін қолданылған деп есептелетін бір жақты құралдар. Көптеген тас құралдарды зерттеушілер нағыз сырғыштарды қолданудан туындаған іздері бойынша анықтау керек дейді, және көбінесе бұл, пышақтың ұшында жұмыс істелгендері болады, яғни "ұшты сырғыштар". Басқа сырғыштарға "жанама сырғыштар" немесе раклорлар жатады, олар тас сынығының ең ұзын жағында жасалады, сондай-ақ екі жағында тіліктері бар сырғыштар, олардың көмегімен құралды басқа нәрсеге бекітуге болыпты. Сырғыштарды әдетте тас сынығының ұшын қағып, бір жағын өткір, ал қалған жақтарын тұтқаға ыңғайлы ету үшін дөңгелете жасау арқылы пішіндейді. Көптеген сырғыштар дөңгелек немесе пышақ тәрізді болады. Сырғыштардың жұмыс жақтары көбінесе дөңгелек болады, ал көптерін жақтау үшін жиектері қиылып, тегістеледі. Сырғыштардың маңызды түрлерінің бірі – қаптал сырғыш, ол атымен сәйкес пішінге ие. Бұл сырғыш түрі Солтүстік Америкадағы Палеоүнділердің қоныстарында жиі кездеседі. Сырғыштар археологиялық қазбаларда табылған ең әртүрлі тас құралдардың бірі болып табылады. Сырғыштардың көптеген түрлеріне байланысты, оларды құралдың мөлшері, пішіні, негізі, жұмыс жақтарының саны, бұрышы, пішіні және тағы да басқалары сияқты көптеген жіктемелерге бөлуге болады.
In prehistoric archaeology, scrapers are unifacial tools thought to have been used for hideworking and woodworking. Many lithic analysts maintain that the only true scrapers are defined on the base of use wear, and usually are those that were worked on the distal ends of blades—i. e., "end scrapers" Other scrapers include the so called "side scrapers" or racloirs, which are made on the longest side of a flake, and notched scrapers, which have a cleft on either side that may have been used to attach them to something else. Scrapers are typically formed by chipping the end of a flake of stone in order to create one sharp side and to keep the rest of the sides dull to facilitate grasping it. Most scrapers are either circle or blade like in shape. The working edges of scrapers tend to be convex, and many have trimmed and dulled lateral edges to facilitate hafting. One important variety of scraper is the thumbnail scraper, a scraper shaped much like its namesake. This scraper type is common at Paleo Indian sites in North America. Scrapers are one of the most varied lithic tools found at archaeological sites. Due to the vast array of scrapers there are many typologies that scrapers can fall under, including tool size, tool shape, tool base, the number of working edges, edge angle, edge shape, and many more.
Пайдалану әдісі
Қырғыштың аса тік бұрышты жиегі жұмыс жиегі болып табылады. Бұл жиек көбінесе терілерді жұмсартуға, теріден ет қырқуға, сондай-ақ ағашпен жұмыс істеуге қолданылады. Құралдың атынан көрініп тұрғанындай, мақсатқа жету үшін теріні немесе ағашты қырғып өңдеу үшін пайдаланылған. Жануарларды терісін алу үшін де қырғыштар жасалған. Қырғыштар қолға жайлысыңқы болу үшін жеткілікті үлкен болған және оларды ағашқа немесе сүйекке бекітпестен де қолдануға болады. Дегенмен, қырғыштардың қысқа саптарға бекітілген болуы мүмкін, бірақ сапталған қырғыштарды табу сирек кездеседі. Қырғышты пайдаланғанда оның өткірлігін қайта жаңарту қажет, әйтпесе тиімділігін жояды. Осының салдарынан, олар қолданылып, қайталанған сайын біртіндеп кішірейеді. Сондықтан, қазбаларда табылған қырғыштардың көпшілігі қайталанған және қолданыстан тозған, енді пайдалы емес болып қалғандары.
The edge of the scraper that is extremely angled is the working edge. This edge is often used to soften hides or to clean meat off of the hides, in addition to being used for wood work. As the term scraper suggests, this tool was scraped at the hide or wood in order to reach the end goal. Scrapers were also made in order to skin animals. Scrapers tended to be large enough to fit comfortably in the hand and could be used without being mounted on wood or bone. However, it is very likely that scrapers were mounted on short handles even though it is very rare to find mounted scrapers. As scrapers are used they have to be resharpened in order to stay effective. This causes them to get progressively smaller as they are used, resharpened, used, resharpened, and used again. Consequently, the majority of the scrapers that are found on sites are ones that have been resharpened and used to the point of being no longer functional.
Санаты
Қырғыштардың екі негізгі жіктелуі – ұшты қырғыштар немесе бүйірлі қырғыштар. Ұшты қырғыштарда пышақ немесе жанықтың бір немесе екі ұшында жұмыс жиегі болады, ал бүйірлі қырғыштарда ұзын жағының бірінде жұмыс жиегі болады. Ағаш және тері өңдеуге қатысты немесе қырғыштың пішіні мен құрылысына байланысты қырғыштардың бірнеше түрі бар. Граттуар – әдетте шақ тастан жасалған қырғыш. Оның негізгі қолданысы ағашпен жұмыс істеу және теріні тазалау болды. Осы типтегі қырғыштың жұмыс жиегі пышақтың ұзын осі бойында орналасқан. Мұрын қырғыштың жұмыс жиегі әдетте екі ұшында да немесе тек бір ұшында ғана кішкентай болады. Бұл типтегі қырғыш дөңгелек пышақтан жасалады және оны дәлдеу жұмыстарында қолданады. Қуыс қырғыш – қырғыштың бүйірінде немесе ұшында ойығы бар қырғыш түрі.
The two main classifications of scrapers are either end scrapers or side scrapers. End scrapers have working edges on one or both ends of a blade or flake, whereas side scrapers have a working edge along one of the long sides. There are a couple of types of scrapers based on their specific use when it comes to wood and hide or based on the shape and design of the scraper itself. The grattoir is a type of scraper usually made of flint and its main uses were to work wood and to clean hides. This type of scraper has its working edge along the long axis of the blade. The nose scraper typically has a smaller working edge either at both ends or just one end. This type of scraper is made from a convex blade and is used in more fine tuning work. The hollow scraper is a type of scraper that has a notch worked into the side or end of the scraper.
Типологиялар
Құралдың өлшемі: Оны салмағы немесе өлшемдері арқылы анықтауға болады және әдетте үлкен немесе кіші қырғыштарға бөлінеді. Құралдың пішіні: Қырғыштардың пішіні әртүрлі болуы мүмкін, мысалы, тіктөртбұрышты, үшбұрышты, ирексіз, дискоидты, күмбезді немесе келісті пішіндес. Көп жағдайда қырғыштың пішінін жіктеу қиын болуы мүмкін. Қырғыштың пішіні көбінесе анықтамалық деп есептеледі. Пішіндеу және қолданудан зақымдану: Қырғыштар мақсатты түрде белгілі бір қолдану үшін пішінделгендеріне және қолдану нәтижесінде пішінделгендеріне байланысты жіктеледі. Құралдың негізі: Қырғыштар пышақтан немесе қабықтан жасалғандығына қарай жіктеледі. Жұмыс жиектерінің саны: Кейбір қырғыштарда бір жұмыс жиегі болса, ал басқаларында екі жұмыс жиегі болады. Үш жұмыс жиегі бар қырғыштар кездесуі өте сирек. Жиектің бұрышы: Кейбір қырғыштар тік жұмыс жиегімен, ал басқалары өткір жұмыс жиегімен жабдықталған. Жиектің пішіні: Қырғыштардың жұмыс жиектері ойыс, тік және дөңгелек болуы мүмкін. Функционалдық жиектердің орналасуы: Қырғыштардың басты айырмашылығының бірі – жұмыс жиегінің қырғыштың ұшында немесе қабырғасында орналасуына байланысты.
Tool size: This can be determined by either weight or dimensions and typically divided into either large or small scrapers. Tool shape: There are many different shapes scrapers can be, including rectangular, triangular, irregular, discoidal, domed, or keeled. In many cases it can be hard to determine the classification for the shape of the scraper. The shape of the scraper is often considered diagnostic. Shaping vs. Use Damage: Scrapers are often divided between ones that have been purposefully shaped for a specific use and ones that have been shaped due to their use. Tool base: Scrapers are classified based on if they originated from a blade or a flake. Number of working edges: Some scrapers have only one working edge while other scrapers have two working edges. It is extremely uncommon for there to be a scraper with three working edges. Edge angle: Some scrapers have vertical working edges while other scrapers have acute working edges. Edge shape: There is distinction between concave, straight, and convex working edges on scrapers. Location of functional edges: One of the main distinctions in scrapers, depends on if the working edge is on the end or the side of the scraper.