Желкенсерфидегі "front loop" – қиын да әдемі трюк! Тоңкеріліс жасап, доска мен желкенді бірдей айналдыру. Оқуға қиын, бірақ тәжірибемен жеңіледі. 🌊🏄♂️
Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
Front loop – бұл желкендемешінің (немесе алға қарай айналым деп те аталады) толқын бетінен секіріп, желкенін, тақтаны және өзін бір мезгілде алға қарай домалатып жасалатын тәсілі. Оның қарапайым түрінде, желкендемешінің қолы бумда, ал аяғы тақтада қалады. Көптегендер алға қарай айналымды орта деңгейдегі үйренуге ең қиын тәсілдердің бірі санайды, себебі ол желкендеме кезінде дамыған көптеген рефлекстерге қайшы келеді.
Front loop is the name given to a trick performed by a windsurfer (also known as a forward loop) whereby the rider performs a jump from a wave face and forces the sail, board and rider to perform a forward somersault in one motion. In its basic form, the rider's hands maintain their position on the boom and the rider's feet maintain their position on the board. Some consider the forward loop to be one of the harder intermediate moves to learn as it goes against most learned reactions whilst sailing.
Іске қосу
Алдыңғы айналымдар желкеннің тартылған және кең нүктелері арасында басталуы мүмкін, басталудың оңайдығы көбінесе толқын бетіне, жел бағытына емес, байланысты болады. Күш-жігер орталығын дұрыс орналастыру үшін, жүргізуші әдетте денесі желге қарай бағытталған күйден тақтаның артқы және орта сызығына қарай жылжиды. Алдыңғы аяқ көбінесе түзу, ал артқы аяқ иілген болады. Бұл күйге жету үшін желкен қозғалыс кезінде сәл босатылады. Жүргізушінің артқы қолы көбінесе күш-жігер орталығын дұрыс орналастыруға және кейін желкенді тартуға көмектесу үшін бумда артқа жылжиды. Содан кейін тақта судан секіріп шығады, мұнда тақтаның мұрны құйрығынан шамамен 45 градусқа жоғары көтеріледі. Айналуға көмектесу үшін, және айналымның қажетті уақытына байланысты, тақта секіру кезінде желге қарай бұрылуы (оралуы) мүмкін, ал төменгі беті желге қарай еңкейтіліп, оське қатысты бұрылады. Айналу жылдамдығын барынша арттыру үшін, жүргізуші желкеннің күш-жігер орталығын өзінің салмақ орталығынан мүмкіндігінше алысқа жылжытады. Желкенді денеге жақын ұстап, оны (қазіргі жазықтығында) желге қарай жылжытады, алдыңғы қолы созылатындай етіп. Бұл қозғалыс желкенді тарту алдында оңай орындалады. Толық созу үшін дене мачтаға қарай иілуі мүмкін. Жүргізуші күш-жігер орталығын айналдырғысы келгенде желкенді тартады. Кейбіреулер осы сәтте желкеннің түйініне қараудың айналуға көмектесетініне сендіреді.
Front loops may be initiated, unhooked, from close hauled through broad reach points of sail, with ease of initiation often determined by wave face rather than wind direction. To properly position the center of effort, the rider typically moves their body from a windward sailing position to a position toward the back and centerline of the board. The forward leg will often be straightened—the rear leg bent. To achieve this position, the sail will have been sheeted out slightly during the motion. The rider's rear hand will often move further back on the boom to assist in proper placement of center of effort and sheeting in later. Next, the board is jumped from the water, by straightening the rear leg, with the nose of the board commonly 45 degrees higher than the tail as it leaves the water. To assist rotation, and depending upon the desired initiation time of the rotation of the loop, the board may be carved (turned) downwind as it is jumped, and the bottom surface may be tilted about a longitudinal axis to expose it to the wind. To prepare for maximum speed of rotation, the rider next moves the center of effort of the sail as far away from their center of mass as possible. Starting with the sail held close to the body, the sail is moved (in its current plane) to windward until the forward arm is extended. This motion is most easily accomplished prior to sheeting in. For maximum extension, the torso may be arched toward the mast as well. When the rider wishes to initiate center of effort rotation, the sail is sheeted in. Some feel that looking at the clew at this point assists rotation.
Қауіптері
Алдыңғы циклді үйрену шынайы қауіптен гөрі көбірек қауіпті сезінуі мүмкін. Айналу осіге жақын тік бұрышпен, шабандоздан қолдары бумда қалғанда және тақта айналу басталғанда желге қарай бағытталғанда, жабдыққа құлау қаупі төмен. Оқу кезінде, егер желкеннің алдыңғы бөлігі айналу кезінде суға күшпен түсіп кетсе, X Ply қабаты жоқ желкеннің жоғарғы монофильмдік бөліктерін жыртып алуға болады. Биік циклдерден дұрыс қонбаған жағдайда тақта екіге бөлінуі мүмкін. Желкенді айналу үшін жеткілікті бұрышпен бұрмаламаған шабандоздар қабырғаларына құлап, құлақ пердесін жарып алуы мүмкін.
Learning to do a front loop may have more perceived than actual risks. With the axis of rotation nearly vertical, the rider's hands remaining on the boom, and the board heading downwind at initiation, there is little danger of landing on the equipment. While learning, it is possible to tear top monofilm panels of a sail without X Ply if the front of the mast drives hard into the water during the rotation. Landing incorrectly from higher loops can break the board in half. Sailers who do not angle the sail enough for the rotation could lands on their side and could blow out their ear drum .
Тарих
Қос алға басуды Роберт Теритехау таныстырды, ал Рикардо Кампелло оны жетілдірді. Қазір бұл жарыстарда кеңінен орындалатын тәсіл.
The double forward was made famous by Robert Teriitehau and perfected by Ricardo Campello. It is now a commonly performed move in competition.