Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
Велосипед бөлігі Soundgarden әнінің Kickstand Kickstand - велосипедті немесе мотоциклді тік ұстауға мүмкіндік беретін құрылғы, ол басқа объектіге немесе адамның көмегіне сүйенбейді. Көбінесе, тірек - бұл аяқпен жерге тиіп, аяқ астынан төмен қарай ауысатын металл. Ол әдетте велосипедтің ортасында немесе артқы жағында орналасады. Кейбір туристік велосипедтерде екісі бар: бірі артқы жағында, екіншісі алдыңғы жағында.
Bicycle part
the Soundgarden song Kickstand
A kickstand is a device on a bicycle or motorcycle that allows the bike to be kept upright without leaning against another object or the aid of a person. A kickstand is usually a piece of metal that flips down from the frame and makes contact with the ground. It is generally located in the middle of the bike or towards the rear. Some touring bicycles have two: one at the rear, and a second in the front.
Тарих
Ең алғашқы белгілі kickstand-ты Альберт Беррюер 1869 жылы жасаған, содан бері kickstands-тар тәуелсіз түрде көптеген рет қайтадан ойлап табылған. Ол рульдің астына орнатылған, сондықтан соңғы үлгілерге қарағанда әлдеқайда ұзын болды. Қысқа модельді 1926 жылы Элдон Хендерсон патенттеп алды. 1891 жылы Пардон У. Тиллингхаст педальге орнатылған, бірақ пайдаланылмаған кезде педаль астына жазық етіп бүлінген стендтің дизайнын патенттеді.
The earliest known kickstand was designed by Albert Berruyer in 1869, and since then kickstands have been independently reinvented many times. It was mounted below the handlebars, so was much longer than more recent designs. A shorter model was patented by Eldon Henderson in 1926. In 1891, Pardon W, Tillinghast patented a design for a stand which was mounted on the pedal, but folded up flat under the pedal when not in use.
Түрлері
Бүйірлік тұрақ стиліндегі kickstand - бұл бір аяқ, ол жай ғана бір жағына, әдетте сол жағына бұрылады, содан кейін велосипед оған сүйенеді. Бүйірлік тұрақтар төменгі тіректің артында немесе арткы шүмектің жанында тірек пен орындық тіректеріне орнатылуы мүмкін. Төменгі жақшаның артына орнатылған бүйірлік тұрақтарды шынжыр тұрақтарды немесе олардың арасындағы жақшаға бекітіп немесе раманың ажырамас бөлігі ретінде дәнекерлеуге болады. Ортаңғы тұрақ - бұл тік төмен қарай бұрылып, арткы дөңгелекті жерден көтеретін аяқтар немесе тірек. Көптеген мотоциклдерде бүйірлік тұрақтардан басқа орта тұрақтар бар. Орталық тұрақ пайдалы, өйткені ол ұзақ уақыт тұрақтандыру үшін мотоциклдің салмағының көп бөлігін дөңгелектерден алады және пайдаланушыға сыртқы тұрақ қажетсіз шынжырларды реттеу сияқты техникалық қызмет көрсетуге мүмкіндік береді. Орталық тұрақтар "стандартты" және "тур" мотоциклдерінің көпшілігінде кездеседі, бірақ салмақты үнемдеу және жер астындағы биіктікті арттыру үшін жоғары өнімділіктегі спорттық велосипедтердің көпшілігінде жоқ. Flickstand - бұл кішкене тірек, ол төмен түтікшеден төмен қарай бұрылады және алдыңғы дөңгелекті қозғалтудан және дөңгелектің айналуынан алдын алу үшін алдыңғы дөңгелекті іске қосып, велосипедті алдыңғы бөлік бұрылу қаупіне ұшырамай, бір нәрсеге қауіпсіз сүйенуге мүмкіндік береді. Бұларды 1970 және 1980 жылдары Rhode Gear компаниясы жасаған. Flickstand енді жасалмайтын болса да, тежегішті бекіту үшін тежегіштің рычагын байлап немесе алдыңғы доңғалақты төменгі түтікке байлап, Velcro белбеуін ұқсас табысқа жету үшін қолдануға болады.
A side stand style kickstand is a single leg that simply flips out to one side, usually the left side, and the bike then leans against it. Side stands can be mounted to the chain stays right behind the bottom bracket or to a chain and seat stay near the rear hub. Side stands mounted right behind the bottom bracket can be bolted on, either clamping the chain stays, or to the bracket between them, or welded into place as an integral part of the frame. A center stand kickstand is a pair of legs or a bracket that flips straight down and lifts the rear wheel off the ground when in use. Center stands can be mounted to the chain stays right behind the bottom bracket or to the rear dropouts. Many motorcycles feature center stands in addition to side stands. The center stand is advantageous because it takes most of the motorcycle's weight off its tires for long term parking, and it allows the user to perform maintenance such as chain adjustments without the need for an external stand. Center stands are found on most "standard" and "touring" motorcycles, but are omitted on most high performance sportbikes to save weight and increase ground clearance. While not strictly a kickstand, the Flickstand is a small bracket that flips down from the down tube and engages the front tire to prevent the front end from steering and tire from rotating, and thus enabling the bike to be safely leaned against an object without danger of the front end turning and the bike subsequently falling to the ground. These were made by Rhode Gear Company in the 1970s and 1980s. While the Flickstand is no longer made, a Velcro strap can be employed for similar success by strapping a brake lever to lock the brake or strap the front wheel to the down tube.