Dodge Charger (1981-1987): Тарихы мен модификациялары

See also Dodge Charger for other models using this name. The Dodge Charger (L body) is a subcompact two door hatchback/fastback built by Dodge from 1981 until 1987. It is based on Chrysler's front wheel drive L platform. A companion model, the Plymouth Turismo, was also marketed.

For 1983, Carroll Shelby modified the Dodge Charger, to be sold at Dodge dealers as the Dodge Shelby Charger. Rather than focusing on speed, Shelby modified the suspension and styling. The engine compression was raised for , and the manual transmission had revised ratios. Shorter springs, special wheels, and tires complemented stronger brakes and a quicker, 14:1, power steering rack. Outside, a new nose and racing stripes accented the performance image. The car received a free flowing exhaust system, making for a more aggressive sound. The body kits, among other parts, were often shipped to dealerships along with the car to be put on after delivery. The reasoning behind this varied, but was said to speed delivery and compensate for ground clearance issues that the cars faced on many car carriers. Production was 8,251 for that first year. For 1984, the Shelby Charger could be ordered with an optional automatic transmission. There were 7,552 Shelby Chargers sold this model year. The high output engine (now up to ) was also available in baseline Chargers and Turismos. These vehicles came in "Charger 2.2" and "Turismo 2.2" schemes, which included Shelby Charger side ground effects, an additional, skinnier, front ground effect (different from the Shelby Charger's due to the quad headlight fascia), "2.2" decals, and an optional hood scoop. The MPFI/Turbocharged Turbo I engine, commonly known as a 'T1' was added for Dodge's 1985 Shelby Charger. This engine produced and was changed from its first appearance in the Dodge Daytona Turbo during the previous year. A Garrett AiResearch T3 turbocharger and Chrysler/Bosch multiple point fuel injection enabled the 2.2 L engine to produce the additional horsepower. A total of 7,709 Shelby Chargers were made for the 1985 model year, and 7,669 in 1986. 1987 was the final year, with just 1,011 produced, plus 1,000 more Shelby Chargers that were sent to Shelby's Whittier Plant in CA, at which time they were modified as the 1987 Shelby GLHS. Dodge Shelby Chargers were available in four different color combinations: Black w/silver skunk stripe (1984–87), Santa Fe Blue w/silver skunk stripe (1983–86), Silver w/Santa Fe Blue skunk stripe (1983–86), and Garnett Red w/silver skunk stripe (1984–87).

Carroll Shelby purchased 1,000 of the last Dodge Shelby Chargers and converted them into GLHSs in his facility at Whittier, California. Every vehicle was built and optioned the same way. All were finished in black and had special badging that marked them as Shelby, not as a Dodge. This was a continuation of the Omni GLHS from the previous year. Shelby used the Turbo I engine updated with the intercooler and plumbing of the Turbo II engine, but without the stronger forged crank, full floating pin pistons, and other durability enhancements of that engine. It has a blow through long runner two piece intake and a modified turbocharger, reclocked with a different compressor cover. They were rated at and of torque from 2400 to 4800 rpm. The Turbo II also received a stronger Getrag A555 five speed manual transmission in place of the rod linkage A525, which was still fitted to the GLHS models. The suspension was upgraded with Koni adjustable struts/shocks and uprated Goodyear Eagle GT Z rated tires. The Centurion 2 wheels were of Shelby's manufacture. A special sticker on the speedometer upped the readout to A special numbered Shelby Automotive badge went in place of the normal Charger badge. The modifications prompted the federal government to declare the car a Shelby model. A Dodge badge appears nowhere on the car, unlike its five door L body sibling, the GLH Omni, which does have the Dodge nameplate.