Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Кіріспе
Бұл мақала негізінен «Британ энциклопедиясының» он бірінші басылымына сүйенеді. Қазіргі ақпарат алу үшін натрий гидроксидін өндіру және хлоралкалий процесіне қараңыз. Сілті өндірісі – сілті жасау процесі. Кәсіби түрде өндірілетін негізгі сілтілерге натрий гидроксиді, натрий карбонаты, калий гидроксиді және калий карбонаты жатады. Әртүрлі металдардан сілті өндіру үшін көптеген процестер ұсынылған, олардың ең таралғандары – Лебланк және аммиакты сода процестері.
This is a historical article, primarily based on the Encyclopædia Britannica Eleventh Edition. For current information see sodium hydroxide manufacture and Chloralkali process. Alkali manufacture is the process by which an alkali is made. Typical alkalis, produced commercially, include sodium hydroxide, sodium carbonate, potassium hydroxide and potassium carbonate. A number of processes have been proposed for the manufacture of alkali from various metals, the most common being the Leblanc and ammonia soda processes.
Леблан процессі
1790 жылы Николас Леблан ойлап тапқан Леблан процесі натрий хлоридін күкірт қышқылымен ыдыратудан басталады, нәтижесінде натрий сульфаты мен тұз қышқылы түзіледі. Содан кейін натрий сульфаты кальций карбонаты мен көмірмен қыздырылады. Натрий карбонатын осы қоспаны сумен жуу арқылы алуға болады. Ол бұл тәжірибені Уайтчепелде сынақ деңгейінде жүргізді. Осы бағытта Англияда да, Еуропа құрлығында да көптеген әрекеттер жасалды, олардың ең танымалсы – Ж.Ж.Т. Шлозинг пен Э. Ролланд жасаған аппараттардың тапқыр комбинациясы. Бірақ бұл мәселенің шынайы экономикалық шешімін алғаш рет 1872 жылы Эрнест Солвей тапты, бұл он жыл бұрын басталған зерттеулердің нәтижесі болды. Саудадағы сода күлінің көп бөлігі қазір Солвей аппаратында жасалады, осы жерде ғана сипатталатын болады, бірақ Диар мен Хеминг ұсынған принциптер бірқатар зауыттарда мүлдем басқа типтегі аппараттармен сәтті қолданылып келе жатынын естен шығармау керек.
The Leblanc process, which was invented by Nicolas Leblanc around 1790, begins with the decomposition of sodium chloride by sulfuric acid, by which sodium sulfate and hydrochloric acid are produced. The sodium sulfate is afterwards fired with calcium carbonate and coal. Sodium carbonate can be extracted from this mixture by washing the mixture with water. who carried it out on an experimental scale in Whitechapel. Many attempts were soon after made in the same direction, both in England and on the continent of Europe, the most remarkable of which was the ingenious combination of apparatus devised by J. J. T. Schloesing and E. Rolland. But a really economical solution of the problem was first definitely found in 1872 by Ernest Solvay, as the result of investigations begun about ten years previously. The greater portion of all the soda ash of commerce is now made by Solvay's apparatus, which alone shall be described in this place, although it should be borne in mind that the principles laid down by Dyar and Hemming have been and are still successfully carried out in a number of factories by an entirely different kind of apparatus.