Кіріспе
компоненттік аналогтық бейне – екі немесе одан көп компоненттік арнаға бөлінген аналогтық бейне сигналы. Көбінесе қолданылатын термин – үш жеке сигнал түрінде берілетін немесе сақталатын компоненттік аналогтық бейне (CAV) ақпараты. Компоненттік бейне, аналогты теледидарда қолданылатын барлық бейне ақпараты бір сигналға біріктірілетін композиттік бейнеден өзгеше. Композиттік бейне сияқты, компоненттік кабельдер аудио сигналды тасымайды және көбінесе аудио кабельдермен бірге қолданылады. Ешқандай қосымша нақтыламаларсыз қолданылған кезде, компоненттік бейне термині әдетте 1990-шы жылдардан 2000-шы жылдарға дейін аналогты жоғары сапалы теледидарларда және олармен байланысты жабдықтарда қолданылған, luma (Y) синхросигналы бар аналогты компоненттік бейнеге қатысты. Бұл технология негізінен HDMI және басқа да толыққанды цифрлық стандарттармен алмастырылды. Компоненттік бейне кабельдері мен олардың жабдықтардағы RCA ұңғыштары әдетте қызыл, жасыл және көк түстермен белгіленеді, бірақ сигнал RGB форматында емес. YPbPr компоненттік бейнесін монитордың ішкі басқаруына арналған RGB сигналына жоғалтусыз түрлендіруге болады; бұл кодтау Y сигналының қара-ақ мониторларда да жұмыс істеуіне мүмкіндік береді.
Video signal that has been split into component channels
Component video is an analog video signal that has been split into two or more component channels. In popular use, it refers to a type of component analog video (CAV) information that is transmitted or stored as three separate signals. Component video can be contrasted with composite video in which all the video information is combined into a single signal that is used in analog television. Like composite, component cables do not carry audio and are often paired with audio cables. When used without any other qualifications, the term component video usually refers to analog component video with sync on luma (Y) found on analog high definition televisions and associated equipment from the 1990s through the 2000s when they were largely replaced with HDMI and other all digital standards. Component video cables and their RCA jack connectors on equipment are normally color coded red, green and blue, although the signal is not in RGB. YPbPr component video can be losslessly converted to the RGB signal that internally drives the monitor; the encoding is useful as the Y signal will also work on black and white monitors.
Аналогты компоненттік бейне
Дисплей құрылғысында (мысалы, катодты сәулелі түтік; CRT) бейнесигналды қайта шығару – көптеген сигнал көздерімен қиындатылатын қарапайым процесс. DVD, VHS, компьютерлер және бейне ойындар консольдері бейнесигналдарды әртүрлі әдістермен сақтайды, өңдейді және жібереді, сонымен қатар әрқайсысы бірнеше сигнал опциясын ұсынады. Сигналдың сапасын сақтаудың бір жолы – бейнесигналдың компоненттерін бір-біріне кедергі келтірмеу үшін бөлу. Осылайша бөлінген сигнал "компоненттік бейне" деп аталады. S-Video, RGB және сигналдар екі немесе одан көп жеке сигналдарды қамтиды, сондықтан олардың барлығы компоненттік бейнесигналдары болып табылады. Көптеген тұтынушылар деңгейіндегі бейне қолданбалары үшін BNC немесе RCA қосылғыштарын пайдаланатын, үш кабельдік жүйе қолданылды. Типтік форматтар 480i (480 көрінетін жол, NTSC үшін 525 толық жол) және 576i (576 көрінетін жол, PAL үшін 625 толық жол). Жеке компьютерлердің дисплейлері үшін 15 пинді DIN коннекторы (IBM VGA) 640×480, 800×600, 1024×768, 1152×864, 1280×1024 экран ажыратымдылығын қамтамасыз етеді.
Luma-ға негізделген аналогты компоненттік бейне
Компоненттік аналогты бейнесигналдардың басқа түрлері бөлек қызыл, жасыл және көк компоненттерді қолданбайды, керісінше, жарықтылық туралы ақпаратты беретін түссүз компонент, люма деп аталады (қара-ақ бейнедегідей). Бұл бір немесе бірнеше түс ақпаратын тасымалдайтын компоненттермен, хрома деп аталатындармен біріктіріледі, олар тек түс туралы ақпарат береді. DVD ойнатқыштарында кездесетін S Video компоненттік бейне шығысы (екі жеке сигнал) және компоненттік бейне шығысы (үш жеке сигнал) осы әдістің мысалдары болып табылады. Видеоны люма және хромаға түрлендіру, JPEG және MPEG қысылу схемаларында қолданылатын хрома субсамплингі арқылы кескіндер мен бейнелерді сақтау үшін қажетті жадты азайтуға мүмкіндік береді. Көптеген тұтынушылық телевизорлар, DVD ойнатқыштар, мониторлар, бейне проекторлар және басқа да бейне құрылғылары бұрын шығыс немесе кіріс ретінде қолданылған. Егер видео көзін 4:3 және 16:9 дисплей форматтарын қолдайтын бейне дисплейіне қосу үшін пайдаланылса, PAL теледидар стандарты дисплейді бір форматтан екіншісіне автоматты түрде ауыстыруға арналған сигнал импульстарын жіберуге мүмкіндік береді.
Пайдаланылған жалғаулар
D Терминалы: Көбінесе жапон электроникасында қолданылады. Үш BNC (кәсіптік) немесе RCA (тұтынушылық) ұңғыштары: Әдетте жасыл (Y), көк (PB) және қызыл (PR) түстес болады. SCART Еуропада қолданылады. Видео кірісі/шығысы (VIVO): Компьютерлік бейнекарталарында "TV Out" деп аталатын 9 контактілі Mini DIN ұңғыштары, көбінесе компоненттік RCA, композиттік RCA және 4 контактілі S Video Mini DIN адаптерімен бірге келеді.
Қадамдастыру
Компоненттік бейнеге бейнемен бірге қосымша синхрондау сигналы жіберілуі қажет. Компоненттік бейне синхрондау сигналдарын бірнеше түрлі жолмен жіберуге болады:
Separate sync Uses separate wires for horizontal and vertical synchronization. When used in RGB (i. e. VGA) connections, five separate signals are sent (Red, Green, Blue, Horz. Sync, Vert. Sync). Composite sync Combines horizontal and vertical synchronization onto one wire. When used in RGB connections, only four separate signals are sent (Red, Green, Blue, Comp. Sync). Sync on green (SOG) Combines composite sync with the green signal in RGB. Only three signals are sent (Red, Green with Sync, Blue). This synchronization system is used in among other applications many systems by Silicon Graphics and Sun Microsystems through a DB13W3 connector. Sync on luminance Similar to sync on green, but combines sync with the luminance signal (Y) of a color system such as YPbPr and S Video. This is the synchronization system normally used in home theater systems. Sync on composite The connector carries a standard composite video signal along with the RGB components, for use with devices that cannot process RGB signals. For devices that do understand RGB, the sync component of that composite signal is used along with the color information from the RGB lines. This arrangement is found in the SCART connector in common use in Europe and some other PAL/SECAM areas.
Бөлек синхрондау Көлденең және тік синхрондау үшін бөлек сымдар қолданылады. RGB (яғни VGA) қосылымдарында қолданылған кезде бес бөлек сигнал жіберіледі (қызыл, жасыл, көк, көлденең синхрондау, тік синхрондау).
Separate sync Uses separate wires for horizontal and vertical synchronization. When used in RGB (i. e. VGA) connections, five separate signals are sent (Red, Green, Blue, Horz. Sync, Vert. Sync). Composite sync Combines horizontal and vertical synchronization onto one wire. When used in RGB connections, only four separate signals are sent (Red, Green, Blue, Comp. Sync). Sync on green (SOG) Combines composite sync with the green signal in RGB. Only three signals are sent (Red, Green with Sync, Blue). This synchronization system is used in among other applications many systems by Silicon Graphics and Sun Microsystems through a DB13W3 connector. Sync on luminance Similar to sync on green, but combines sync with the luminance signal (Y) of a color system such as YPbPr and S Video. This is the synchronization system normally used in home theater systems. Sync on composite The connector carries a standard composite video signal along with the RGB components, for use with devices that cannot process RGB signals. For devices that do understand RGB, the sync component of that composite signal is used along with the color information from the RGB lines. This arrangement is found in the SCART connector in common use in Europe and some other PAL/SECAM areas.
Композиттік синхрондау Көлденең және тік синхрондауды бір сымға біріктіреді. RGB қосылымдарда қолданылған кезде тек төрт бөлек сигнал жіберіледі (қызыл, жасыл, көк, композиттік синхрондау).
Separate sync Uses separate wires for horizontal and vertical synchronization. When used in RGB (i. e. VGA) connections, five separate signals are sent (Red, Green, Blue, Horz. Sync, Vert. Sync). Composite sync Combines horizontal and vertical synchronization onto one wire. When used in RGB connections, only four separate signals are sent (Red, Green, Blue, Comp. Sync). Sync on green (SOG) Combines composite sync with the green signal in RGB. Only three signals are sent (Red, Green with Sync, Blue). This synchronization system is used in among other applications many systems by Silicon Graphics and Sun Microsystems through a DB13W3 connector. Sync on luminance Similar to sync on green, but combines sync with the luminance signal (Y) of a color system such as YPbPr and S Video. This is the synchronization system normally used in home theater systems. Sync on composite The connector carries a standard composite video signal along with the RGB components, for use with devices that cannot process RGB signals. For devices that do understand RGB, the sync component of that composite signal is used along with the color information from the RGB lines. This arrangement is found in the SCART connector in common use in Europe and some other PAL/SECAM areas.
Жасыл түсте синхрондау (SOG) Композиттік синхрондауды RGB-дегі жасыл сигналмен біріктіреді. Тек үш сигнал жіберіледі (қызыл, синхрондалған жасыл, көк). Бұл синхрондау жүйесі Silicon Graphics және Sun Microsystems компаниялары DB13W3 қосқышы арқылы көптеген жүйелерде, сондай-ақ басқа да көптеген қолданбаларда қолданылады.
Separate sync Uses separate wires for horizontal and vertical synchronization. When used in RGB (i. e. VGA) connections, five separate signals are sent (Red, Green, Blue, Horz. Sync, Vert. Sync). Composite sync Combines horizontal and vertical synchronization onto one wire. When used in RGB connections, only four separate signals are sent (Red, Green, Blue, Comp. Sync). Sync on green (SOG) Combines composite sync with the green signal in RGB. Only three signals are sent (Red, Green with Sync, Blue). This synchronization system is used in among other applications many systems by Silicon Graphics and Sun Microsystems through a DB13W3 connector. Sync on luminance Similar to sync on green, but combines sync with the luminance signal (Y) of a color system such as YPbPr and S Video. This is the synchronization system normally used in home theater systems. Sync on composite The connector carries a standard composite video signal along with the RGB components, for use with devices that cannot process RGB signals. For devices that do understand RGB, the sync component of that composite signal is used along with the color information from the RGB lines. This arrangement is found in the SCART connector in common use in Europe and some other PAL/SECAM areas.
Жарықтық бойынша синхрондау Жасыл түспен синхрондауға ұқсас, бірақ синхрондауды YPbPr және S Video сияқты түсті жүйелердің жарықтық сигналымен (Y) біріктіреді. Бұл үй кинотеатрларында әдетте қолданылатын синхрондау жүйесі.
Separate sync Uses separate wires for horizontal and vertical synchronization. When used in RGB (i. e. VGA) connections, five separate signals are sent (Red, Green, Blue, Horz. Sync, Vert. Sync). Composite sync Combines horizontal and vertical synchronization onto one wire. When used in RGB connections, only four separate signals are sent (Red, Green, Blue, Comp. Sync). Sync on green (SOG) Combines composite sync with the green signal in RGB. Only three signals are sent (Red, Green with Sync, Blue). This synchronization system is used in among other applications many systems by Silicon Graphics and Sun Microsystems through a DB13W3 connector. Sync on luminance Similar to sync on green, but combines sync with the luminance signal (Y) of a color system such as YPbPr and S Video. This is the synchronization system normally used in home theater systems. Sync on composite The connector carries a standard composite video signal along with the RGB components, for use with devices that cannot process RGB signals. For devices that do understand RGB, the sync component of that composite signal is used along with the color information from the RGB lines. This arrangement is found in the SCART connector in common use in Europe and some other PAL/SECAM areas.
Композиттік синхрондау RGB сигналдарын өңдей алмайтын құрылғылармен пайдалану үшін RGB компоненттерімен бірге стандартты композиттік бейне сигналын жеткізеді. RGB түсінетін құрылғылар үшін сол композиттік сигналдың синхрондау компоненті RGB сызықтарынан түс туралы ақпаратпен бірге қолданылады. Бұл құрылғы Еуропа мен кейбір басқа PAL/SECAM аймақтарында кеңінен қолданылатын SCART жалғауышта кездеседі.
Separate sync Uses separate wires for horizontal and vertical synchronization. When used in RGB (i. e. VGA) connections, five separate signals are sent (Red, Green, Blue, Horz. Sync, Vert. Sync). Composite sync Combines horizontal and vertical synchronization onto one wire. When used in RGB connections, only four separate signals are sent (Red, Green, Blue, Comp. Sync). Sync on green (SOG) Combines composite sync with the green signal in RGB. Only three signals are sent (Red, Green with Sync, Blue). This synchronization system is used in among other applications many systems by Silicon Graphics and Sun Microsystems through a DB13W3 connector. Sync on luminance Similar to sync on green, but combines sync with the luminance signal (Y) of a color system such as YPbPr and S Video. This is the synchronization system normally used in home theater systems. Sync on composite The connector carries a standard composite video signal along with the RGB components, for use with devices that cannot process RGB signals. For devices that do understand RGB, the sync component of that composite signal is used along with the color information from the RGB lines. This arrangement is found in the SCART connector in common use in Europe and some other PAL/SECAM areas.
Цифрлық компоненттік бейне
Цифрлық компоненттік бейне, цифрлық сигналдарға арналған сигнал желілері / жалғау тіректері бар бір кабельдерді пайдаланады, цифрлық түс кеңістігі мәндерін беру арқылы 480p, 480i, 576i, 576p, 720p, 1080i және 1080p сияқты жоғарырақ ажыратымдылықтарды қамтамасыз етеді. RGB компоненттік бейне көбінесе DisplayPort немесе Digital Visual Interface (DVI) сияқты қазіргі заманғы цифрлық форматтармен алмастырылды, ал үй кинотеатрлары жоғары ажыратымдылық мультимедиалық интерфейсін (HDMI) жиі қолданады, ол жоғарырақ ажыратымдылықты, жоғары динамикалық диапазонды қолдайды және цифрлық құқықтарды басқаруды жүзеге асыруға мүмкіндік береді. Аналогтық технологияның қанауына негізінен экрандардың үлкен, жалпақ цифрлық панельдерге өтуі, сондай-ақ дыбыс және бейне үшін бір кабельді пайдалануға деген қалау, және цифрлық медиа көзінен аналогқа және керісінше жалпақ цифрлық дисплейге түрлендіру кезінде, әсіресе жоғары ажыратымдылықта аналог сигналдары шуға өте осал болғандықтан, бейненің сәл нашарлауы себеп.
Компонент пен композиттік
NTSC, PAL немесе SECAM сияқты құрама сигналдарда жарықтық (Y) сигналы және түстілік (C) сигналдары бір сигналға біріктіріледі. Түс компоненттері бөлек сигналдар түрінде сақталғанда, бұл компоненттік аналогтық бейне (CAV) деп аталады, ол үшін үш бөлек сигнал қажет: жарықтық сигналы (Y) және түс айырмашылығы сигналдары (R-Y және B-Y). Компоненттік бейне кодтау процесінен өтпегендіктен, түс сапасы құрама бейнеге қарағанда айқын жақсырақ болады. Компоненттік бейне ұңғыштары бірегей емес, себебі бірнеше стандарттар үшін бірдей ұңғыштар қолданылады; сондықтан компоненттік бейне қосылымын жасау көбінесе қанағаттанарлық бейне сигналын беруге әкелмейді. Көптеген DVD ойнатқыштар мен теледидарларды қолданылып жатқан кіріс/шығыс түрін көрсету үшін орнату қажет болуы мүмкін, және егер дұрыс орнатылмаса, кескін дұрыс көрсетілмеуі мүмкін. Мысалы, прогрессивті сканилеу көбінесе компоненттік бейне шығысы таңдалған кезде де автоматты түрде қосылмайды.