Ірі кристалды магмалық тас

Igneous rock with very large interlocked crystals

A pegmatite is an igneous rock showing a very coarse texture, with large interlocking crystals usually greater in size than and sometimes greater than Most pegmatites are composed of quartz, feldspar, and mica, having a similar silicic composition to granite. However, rarer intermediate composition and mafic pegmatites are known. Many of the world's largest crystals are found within pegmatites. These include crystals of microcline, quartz, mica, spodumene, beryl, and tourmaline. Some individual crystals are over long. Most pegmatites are thought to form from the last fluid fraction of a large crystallizing magma body. This residual fluid is highly enriched in volatiles and trace elements, and its very low viscosity allows components to migrate rapidly to join an existing crystal rather than coming together to form new crystals. This allows a few very large crystals to form. While most pegmatites have a simple composition of minerals common in ordinary igneous rock, a few pegmatites have a complex composition, with numerous unusual minerals of rare elements. These complex pegmatites are mined for lithium, beryllium, boron, fluorine, tin, tantalum, niobium, rare earth elements, uranium, and other valuable commodities.

The word pegmatite derives from Homeric Greek, πήγνυμι (pēgnymi), which means “to bind together”, in reference to the intertwined crystals of quartz and feldspar in the texture known as graphic granite. The term was first used by René Just Haüy in 1822 as a synonym for graphic granite. Wilhelm Karl Ritter von Haidinger first used the term in its present meaning in 1845. composed of interlocking crystals, with individual crystals usually over in size and sometimes exceeding Most pegmatites have a composition similar to granite, so that their most common minerals are quartz, feldspar, and mica. However, other pegmatite compositions are known, including compositions similar to nepheline syenite Geologists typically prefix the term with a compositional description, so that granitic pegmatite is a pegmatite with the composition of granite while nepheline syenite pegmatite is a pegmatite with the composition of nepheline syenite. Spodumene crystals over 40 feet (12 m) long have been found in the Black Hills of South Dakota, and beryl crystals 27 feet (8 m) long and 6 feet (2 m) in diameter have been found at Albany, Maine. Pegmatite bodies are usually of minor size compared to typical intrusive rock bodies. Pegmatite body size is on the order of magnitude of one to a few hundred meters. Compared to typical igneous rocks they are rather inhomogeneous and may show zones with different mineral assemblages. Crystal size and mineral assemblages are usually oriented parallel to the wall rock or even concentric for pegmatite lenses.

Modern pegmatite classification schemes are strongly influenced by the depth zone classification of granitic rocks published by Buddington (1959), and the Ginsburg & Rodionov (1960) and Ginsburg et al. (1979) classification which categorized pegmatites according to their depth of emplacement and relationship to metamorphism and granitic plutons. Cerny’s (1991) revision of that classification scheme is widely used, Cerny’s (1991) pegmatite classification, which is a combination of emplacement depth, metamorphic grade and minor element content, has provided significant insight into the origin of pegmatitic melts and their relative degrees of fractionation. Granitic pegmatites are commonly ranked into three hierarchies (class – family – type – subtype) depending upon their mineralogical geochemical characteristics and depth of emplacement according to Cerny (1991). Classes are Abyssal, Muscovite, Rare Element and Miarolitic. The Rare Element Class is subdivided based on composition into LCT and NYF families: LCT for Lithium, Cesium, and Tantalum enrichment and NYF for Niobium, Yttrium, and Fluorine enrichment. Most authors classify pegmatites according to LCT and NYF types and subtypes. Another important contribution of the classification is the petrogenetic component of the classification, which shows the association of LCT pegmatites with mainly orogenic plutons, and NYF pegmatites with mainly anorogenic plutons. Lately, there have been a few attempts to create a new classification for pegmatites less dependent on mineralogy and more reflective of their geological setting. On this issue, one of the most notable efforts on this matter is Wise's (2022) pegmatite classification, which focuses mostly on the source of the magma from which the pegmatite cristalizes.

Pegmatites form under conditions in which the rate of new crystal nucleation is much slower than the rate of crystal growth. Large crystals are favored. In normal igneous rocks, coarse texture is a result of slow cooling deep underground. It is not clear if pegmatite forms by slow or rapid cooling. In some studies, crystals in pegmatitic conditions have been recorded to grow at a rate ranging from 1 m to 10 m per day. Pegmatites are the last part of a magma body to crystallize. This final fluid fraction is enriched in volatile and trace elements. Some pegmatites have more complex zoning. Five distinct zones are recognized in the Harding Pegmatite in the Picuris Mountains of northern New Mexico, US. These are:
A white border rind of fine grained quartz albite muscovite pegmatite. A continuous layer of very coarse quartz, albite, and muscovite. This zone also contains microcline, and has abundant accessory apatite, beryl, and tantalite. Beryl is occasionally very coarse and abundant. A continuous layer of massive quartz. This zone is also rich in muscovite, microcline, and cleavelandite. A spectacular quartz and lath spodumene zone. The spodumene occurs as blade like crystals, sometimes of enormous size, mostly oriented at random but sometimes arranged to form a comb like structure. Accessory minerals are beryl, apatite, microcline, and tantalum niobium minerals, especially in the lower part of this zone. There is some pseudomorphic replacement of spodumene by rose muscovite and quartz by cleavelandite. The core of the pegmatite, known as "spotted rock", which is relatively fine grained spodumene, microcline, and quartz, with accompanying finer grained albite, lithium bearing muscovite, lepidolite, microlite, and tantalite. Much of the spodumene and microcline have been extensively corroded and replaced by fine grained micas. Large crystals nucleate on the margins of pegmatites, becoming larger as they grow inward. These include very large conical alkali feldspar crystals. Aplites are commonly present. These may cut across the pegmatite, but also form zones or irregular patches around coarser material. The aplites are often layered, showing evidence of deformation. Xenoliths may be found in the body of the pegmatite, but their original mineral content is replaced by quartz and alkali feldspar, so that they are difficult to distinguish from the surrounding pegmatite. Pegmatite also commonly replaces part of the surrounding country rock. Because pegmatites likely crystallize from a fluid dominated phase, rather than a melt phase, they straddle the boundary between hydrothermal mineral deposits and igneous intrusions. Although there is broad agreement on the basic mechanisms by which they form, the details of pegmatite formation remain enigmatic. Pegmatites have characteristics inconsistent with other igneous intrusions. They are not porphyritic, and show no chilled margin. On the contrary, the largest crystals are often found on the margins of the pegmatite body. While aplites are sometimes found on the margins, they are as likely to occur within the body of the pegmatite. The crystals are never aligned in a way that would indicate flow, but are perpendicular to the walls. This implies formation in a static environment. Some pegmatities take the form of isolated pods, with no obvious feeder conduit. As a result, metamorphic or metasomatic origins have sometimes been suggested for pegmatites. A metamorphic pegmatite would be formed by removal of volatiles from metamorphic rocks, particularly felsic gneiss, to liberate the right constituents and water, at the right temperature. A metasomatic pegmatite would be formed by hydrothermal circulation of hot alteration fluids upon a rock mass, with bulk chemical and textural change. Metasomatism is currently not favored as a mechanism for pegmatite formation and it is likely that metamorphism and magmatism are both contributors toward the conditions necessary for pegmatite genesis. Pegmatites derived from batholiths can be divided into a family of NYF pegmatites, characterized by progressive enrichment in niobium, yttrium, and fluorine as well as enrichment in beryllium, rare earth elements, scandium, titanium, zirconium, thorium, and uranium; and a family of LCT pegmatites, characterized by progressive accumulation of lithium, caesium, and tantalum, as well as enrichment in rubidium, beryllium, tin, barium, phosphorus, and fluorine. The NYF pegmatites likely fractionated from A to I type granites that were relatively low in aluminium (subaluminous to metaluminous granites). These granites originated from depleted crust or mantle rock. LCT pegmatites most likely formed from S type granites or possibly I type granites, with a higher aluminium content (peraluminous granites). Examples include aquamarine, tourmaline, topaz, fluorite, apatite, and corundum, often along with tin, rare earth, and tungsten minerals, among others. For quartz mining, pegmatites with central quartz masses have been of particular interest. The primary source for caesium is pollucite, a mineral from a zoned pegmatite. The majority of the world's beryllium is sourced from non gem quality beryl within pegmatite. Tantalum, niobium, and rare earth elements are sourced from a few pegmatites worldwide, such as the Greenbushes Pegmatite, the Kibara Belt of Rwanda and Democratic Republic of the Congo, the Kenticha mine of Ethiopia the Alto Ligonha Province of Mozambique, and the Mibra (Volta) mine of Minas Gerais, Brazil.

Notable pegmatite occurrences are found worldwide within the major cratons, and within greenschist facies metamorphic belts. However, pegmatite localities are only well recorded when economic mineralisation is found. Pegmatites are found as irregular dikes, sills, or veins, and are most common at the margins of batholiths (great masses of intrusive igneous rock). Most are closely related spatially and genetically to large intrusions. They may take the form of veins or dikes in the intrusion itself, but more commonly, they extend into the surrounding country rock, especially above the intrusion. Some pegmatites surrounded by metamorphic rock have no obvious connection to a larger intrusion. Pegmatites in low grade metamorphic rock tend to be dominated by quartz and carbonate minerals. Pegmatites in metamorphic rock of higher grade are dominted by alkali feldspar. Gabbroic pegmatites typically occur as lenses within bodies of gabbro or diabase. Nepheline syenite pegmatites are common in alkaline igneous complexes.