Узлы для натяжения троса: варианты и особенности применения.

Type of knot

The portion of the trucker's hitch which differs in the following variations is the method used to form the loop which the working end slides through to produce the mechanical advantage. The different methods of forming the loop affect the ease and speed of tying and releasing, and the stability of the final product. The variations are presented in order of increasing stability.

This version of the knot uses a sheepshank, in this kind of application also known as a bell ringer's knot, to form the loop. It is quicker to make than a fixed loop, but is less dependable. It is avoided in critical applications (such as securing a load on a truck) as it can fall apart under too little load or too much load, and can capsize if not dressed properly. or a double turn self crossing half hitch or a triple turn self crossing half hitch. A sheep shank with two consecutive half hitches i. e. a clove hitch to secure the upper eye and to form the lower eye is more popular in the west.

The loop formed in one version is a simple Slipped Overhand Loop. This version is good for light to moderate loads

Another version uses a multiply twisted bight to pass a bight of the working end to form the eye of the loop. This version tolerates higher load.

The most reliable common variation uses a fixed loop, such as an alpine butterfly loop, artillery loop, figure eight loop or directional figure eight loop, or another of many suitable loop knots. If a fixed loop is used repeatedly for tying the trucker's hitch in the same portion of rope, excessive wear or other damage may be suffered by the portion of the loop which working end slides against. If the tail end is wrapped through the last loop twice, the resulting friction may render manual cinching unnecessary. Once tight, the trucker's hitch is often secured with a half hitch, usually slipped for easy releasing and to avoid the necessity of access to the end of the rope, though a more secure finish, such as two half hitches, may be called for. Under large loads, the finishing half hitch can jam, especially if it is not slipped; the difficulty of releasing it can be compounded by the fact that the knot is typically still under tension when it is to be untied. Finishing with a taut line hitch or a Farrimond friction hitch to the standing part allows the finishing knot to be tied and untied with no tension. This eliminates any jamming problems and also allows the line to be re tensioned if necessary. A mechanical advantage of ideally 3:1 can nearly be achieved when using an equivalent setup with pulleys, but is reduced substantially by friction when using knots.

The trucker's hitch knot is portrayed by comedy duo Ylvis in their 2014 song with the same name. The lyrics and the video pretend (in a humorous way) to demonstrate how to tie the knot.