Құбырлы аспаптар мен үрлемелі аспаптардың құрылысы
Fipple
Үскірік аспаптары: флейта, рекордер, және тін суырмасын қамтиды. Бұл аспаптардың дыбыс шығару механизмі, құрылысы және Hornbostel–Sachs жүйесі туралы ақпарат.
Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
Музыкалық аспап
Musical instrument
"Фиппл" термині флагелет, рекордер және қалайы сыбызғыны қамтитын, аузынан үрленетін флейталардың әртүрлі түрлерін білдіреді. Hornbostel–Sachs музыкалық аспаптарды жіктеу жүйесінде бұл топ "Құбырлы немесе құбыр флейталар" деп аталады. "Фиппль флейтасы" деген атау жиі қолданылатынмен, фипплді құрайтын дыбыс тудыратын механизмнің құрылымдық ерекшеліктері туралы жалпы пікір жоқ.
The term fipple specifies a variety of end blown flute that includes the flageolet, recorder, and tin whistle. The Hornbostel–Sachs system for classifying musical instruments places this group under the heading "Flutes with duct or duct flutes." The label "fipple flute" is frequently applied to members of the subgroup but there is no general agreement about the structural detail of the sound producing mechanism that constitutes the fipple, itself.
Номенклатура
Суретте рекордердің ауызшасы бейнеленген, онда аспаптың (В) ішіне қашалған каналмен бірге ағаш блок (А) көрсетілген. Бұл екеуі бірігіп, ауа ағынын өткізетін арнаны құрайды, ол ағын өткір жиекке (С) қарай бағыттайды. Жиек ауаны бөліп, оны түтік ішіне және сыртына кезекпен жіберіп, түтік ішіндегі ауа бағанын үнемі тербеліске келтіреді. Бұл бақыланатын "ауа тілі" барлық флейталардың ерекше белгісі болып табылады, сондықтан олардың барлығында жиек немесе ауаны бөлуге арналған құрылғы болады. Hornbostel Sachs жүйесінде көрсетілгендей, арнаны құрудың әртүрлі тәсілдері бар. Олардың бірі – ойыншының еріндері арқылы ауа ағынын механикалық көмексіз, тікелей жиекке бағыттау. Мұның кең таралған мысалдары – ұшынан үрленетін нэй және бүйірден үрленетін концерттік флейта. "Фиппл" термині алғаш рет 1626 жылы Фрэнсис Бэконның рекордер мен көлденең флейтаны салыстырған еңбегінде қолданылған. Осы сипаттама бойынша, фиппл – құбырдың бір жағын жауып, құралға тікелей соққан ауа арнасын "түзетуге" арналған арнаны ғана ашық қалдыратын тығын. Бұрышты түрде үрленетін құбырдың ауыз тесігі немесе ауызшасының жанындағы қатты "тоқтау" оған ұқсас. Бұл "фиппл флейтасы" терминін рекордерді атау үшін тарихи негіздейді (нем. Blockflöte). Кейінгі авторлар осы терминді осы мағынада қолданған, бірақ жоғарыда көрсетілген механикалық құрылымның қай бөлігін нақты фиппл деп санайтыны бойынша ерекшеленеді. Бұл сөз блок, жиек, толық блок-арна жиек құрылымы және тіпті бүкіл аспапты атау үшін қолданылады. Бұл түсініксіздік Grove Music Online-дағы "Фиппл" мақаласында егжей-тегжейлі сипатталған, онда: "Терминнің мағынасына ешкім келісе алмайтындықтан, одан әрі шатасуды болдырмау үшін оны қолданудан бас тарту керек" деген қорытынды жасалған. Төмендегі мәтінде, әдетте "фиппл флейтасы" деп аталатын флейта "арналы флейта" деп аталады.
The accompanying illustration of the mouthpiece of a recorder shows a wooden block (A) with a channel carved into the body of the instrument (B), together forming a duct that directs a ribbon of air across an opening toward a sharp edge (C). The edge splits the air in a manner that alternately directs it into and outside of the tube, setting the contained column of air into periodic vibration. This flow controlled "air reed" is a definitive characteristic of all flutes, which therefore all have an edge or equivalent air splitting device. As is clear from the Hornbostel Sachs heading, there are several ways in which a duct can be formed. These include the player's lips controlling the stream of air as it is directed to the edge, without mechanical assistance. Common examples of this are the end blown ney and the side blown concert flute. The first attested use of the term fipple is in a comparison between the recorder and the transverse flute by Francis Bacon, published in 1626. By this description, the fipple is a plug that nearly closes one end of the pipe, open only for the duct that "straightens” the channel of air blown axially into the instrument. The solid "stop” near the mouth hole or embouchure on a pipe that is blown transversely is analogous to it. This provides historical justification for using the term "fipple flute" to designate a recorder (cf. the German term Blockflöte). Subsequent authors have used the term in that sense but differ in the element of the mechanical aggregate illustrated above that they regard specifically as the fipple. That word is used variously to designate the block, the edge, the full block duct edge structure, and the entire instrument. This ambiguity is detailed in the article headed Fipple in Grove Music Online, which concludes, "Since nobody can agree what the term means, to avoid further confusion its use should be abandoned." In the text below, what might otherwise be termed a fipple flute is referred to as a duct flute.
Дыбыс шығару
Құралдың шетінен сәл шығып тұрған бөлігіндегі ауа тілі мен ауа бағанасының өзара әрекеттесуінен сыбызғының дыбысы пайда болады. Құралдың жалпы өлшемдері оның тембрін және тонын анықтайды. Ойыншы осы екі факторды өзгертуге мүмкіндік беретін әртүрлі қосымша құрылымдық элементтер бар. Мысалы, сыбызғының корпусын бүйінен тесіп өтетін және тербелісті ауа бағанасының ұзындығын өзгерту үшін ашылып не жабылатын саусақ тесіктері жиынтығын келтіруге болады. Сыбызғыны арналы флейталардың дизайнындағы одан әрі нюанстарды көрсету үшін пайдалануға болады. Анықтама бойынша, арна құралдың корпусына қашалған арнадан және бекіткіштен (блоктан) құралады. Бұл өткел жел арнасы деп те аталады және қарама-қарсы жағындағы жиегімен шектелген терезе деп аталатын ашылумен аяқталады. Бұл қатаң құрылым, мысалы, көлденең флейтаның аузына қарағанда, динамикалық және интонациялық икемділікті азайтады. Бұл басқа құрылымдық элементтермен толықтырылуы мүмкін. Сыбызғының жағдайында, олардың болуы немесе болмауы көбінесе жаппай өндірілген және қолмен жасалған құралдарды ажыратады. Жалпы алғанда, бір типті арналы флейта мен екінші типті арналы флейта арасындағы айырмашылық күрделі және ұсақ құрылымдық ерекшеліктермен анықталады.
A whistle sound is produced by the interaction between the air reed and the air column in the segment of the instrument that projects just beyond the edge. The dimensions of the entire body of the instrument determine its timbre and pitch. Various additional structural details permit the player to alter both these factors. One example of this is the set of finger holes that laterally pierce the body of a recorder and are opened or closed to change the length of the vibrating air column. The recorder can be used to illustrate further nuance in the design of duct flutes. By definition, the duct is formed by a channel carved into the body of the instrument, and the block. This passage is alternately termed a windway and ends at an opening referred to as a window, bounded by the edge on the opposite side. This rigid structure affords intrinsically less dynamic and intonational flexibility than does, for example, a transverse flute embouchure. This can be offset by other structural details. In the case of the recorder, their presence or absence often differentiates between mass produced and artisan built instruments. In a broader context, the difference between one type of duct flute and another is determined both by gross and finer structural detail.
Тарих
Құбырлы флейталардың ұзақ тарихы бар: қой сүйегінен жасалған темір дәуірінің үлгісі Лидс қалалық мұражайында сақталады. Л. Э. Маккалоу ең көне сақталған сыбызғылар 12 ғасырға жатса да, "Федан ойнаушылары Ирландия корольінің сарайының сипаттамасында да еске алынады, бұл 7 және 8 ғасырлардағы Ирландияның ерте заңдарында кездеседі" деп жазады.
Duct flutes have a long history: an example of an Iron Age specimen, made from a sheep bone, exists in Leeds City Museum. L. E. McCullough notes that the oldest surviving whistles date from the 12th century, but that, "Players of the feadan are also mentioned in the description of the King of Ireland's court found in Early Irish law dating from the 7th and 8th centuries A. D."
Тускулум сыбызғысы – 14 см ұзындығындағы, алты саусақ тесігі бар, мыс немесе қоладан жасалған сыбызғы. Ол 14 және 15 ғасырларға жататын керамикалық бұйымдармен бірге табылған және қазір Шотландия Ұлттық мұражайларының қорында сақталуда. Ең ерте сақталған тік флейта 1940 жылы Нидерландының Дордрехт қаласындағы қамал орнынан табылды және 14 ғасырға жатсады. Ол көбінесе бұрынғы қалпында сақталған, бірақ ойнатуға болмайды. 14 ғасырға жататын тағы бір жақсы сақталған тік флейта Германияның солтүстігіндегі (Геттинген қаласында) латринадан табылған. Сондай-ақ 14 ғасырға жататын үлгілер Эсслинген (Германия) және Тарту (Эстония) қалаларынан да табылды. Родос (Грекия) қаласында 14-15 ғасырларға жататын сүйектен жасалған флейтаның фрагменті бар; ал Эльблаг (Польша) қаласынан 15 ғасырға жататын толық сақталған үлгі табылды.
The Tusculum whistle is a 14 cm whistle with six finger holes, made of brass or bronze, found with pottery dating to the 14th and 15th centuries; it is currently in the collections of the National Museums Scotland. One of the earliest surviving recorders was discovered in a castle moat in Dordrecht, the Netherlands in 1940, and has been dated to the 14th century. It is largely intact, though not playable. A second more or less intact 14th century recorder was found in a latrine in northern Germany (in Göttingen): other 14th century examples survive from Esslingen (Germany) and Tartu (Estonia). There is a fragment of a possible 14th 15th century bone recorder in Rhodes (Greece); and there is an intact 15th century example from Elblag (Poland).