Кіріспе
Фотофиксатор – фотофильмді немесе қағазды фотографиялық өңдеудің соңғы сатысында қолданылатын химиялық заттардың қоспасы. Фиксатор суретті тұрақтандырады, фотопленкаға немесе фотоқағазға қалған әрекет етпеген күміс галоидтарын алып тастайды, суретті құрайтын металл күмісті қалдырады. Фиксация арқылы пленка немесе қағаз жарық әсеріне сезімтал болмайды. Егер фиксацияланбаса, қалған күміс галоидтары қарарып, суреттің бүркелеуіне (тұманды болуына) әкеледі. Фиксация әдетте пленка немесе қағазды тиосульфат тұзымен өңдеу арқылы жүзеге асырылады. Көбінесе қолданылатын тұздар – натрий тиосульфаты (әдетте "гипо" деп аталады) және аммиак тиосульфаты (әдетте қазіргі заманғы жылдам фиксатор формулаларында қолданылады). Фиксация келесі химиялық реакцияларды қамтиды (X = галоид, әдетте Br−):
AgX + 2 S2O32− → [Ag(S2O3)2]3− + X−
AgX + 3 S2O32− → [Ag(S2O3)3]5− + X−
Photographic fixer is a mix of chemicals used in the final step in the photographic processing of film or paper. The fixer stabilises the image, removing the unexposed silver halide remaining on the photographic film or photographic paper, leaving behind the reduced metallic silver that forms the image. By fixation, the film or paper is insensitive to further action by light. Without fixing, the remaining silver halide would darken and cause fogging of the image. Fixation is commonly achieved by treating the film or paper with a solution of thiosulfate salt. Popular salts are sodium thiosulfate—commonly called hypo—and ammonium thiosulfate—commonly used in modern rapid fixer formulae. Fixation involves these chemical reactions (X = halide, typically Br−):
AgX + 2 S2O32− → [Ag(S2O3)2]3− + X−
AgX + 3 S2O32− → [Ag(S2O3)3]5− + X−
In addition to thiosulphate the fixer typically contains mildly acidic compounds to adjust the pH and suppress trace amounts of the developer. This compound is often an alkali hydrogen sulfite (bisulfite) which also serves to preserve the thiosulphate. Less commonly it may also contain other additives e. g. for the hardening of gelatin. There are also non thiosulphate fixers, at least for special purposes. Fixer is used for processing all commonly used films, including black and white films, Kodachrome, and chromogenic films.
Тиосульфаттан басқа, фиксаторда әдетте pH-ты реттеу және проявительдің (дамушының) іздік мөлшерлерін басу үшін жеңіл қышқыл қосылыстар болады. Бұл қосылыс көбінесе сілтілік сутек сульфиті (бисульфит) болып табылады, ол тиосульфатты сақтауға да қызмет етеді. Сирек жағдайларда, желатинді қатайту үшін сияқты, басқа қоспалар да болуы мүмкін. Тиосульфатсыз фиксаторлар да бар, кем дегенде арнайы мақсаттар үшін. Фиксатор барлық қолданылатын фильмдерді өңдеу үшін қолданылады, оның ішінде қара-ақ фильмдерді, Kodachrome және хромогендік фильмдерді.
Photographic fixer is a mix of chemicals used in the final step in the photographic processing of film or paper. The fixer stabilises the image, removing the unexposed silver halide remaining on the photographic film or photographic paper, leaving behind the reduced metallic silver that forms the image. By fixation, the film or paper is insensitive to further action by light. Without fixing, the remaining silver halide would darken and cause fogging of the image. Fixation is commonly achieved by treating the film or paper with a solution of thiosulfate salt. Popular salts are sodium thiosulfate—commonly called hypo—and ammonium thiosulfate—commonly used in modern rapid fixer formulae. Fixation involves these chemical reactions (X = halide, typically Br−):
AgX + 2 S2O32− → [Ag(S2O3)2]3− + X−
AgX + 3 S2O32− → [Ag(S2O3)3]5− + X−
In addition to thiosulphate the fixer typically contains mildly acidic compounds to adjust the pH and suppress trace amounts of the developer. This compound is often an alkali hydrogen sulfite (bisulfite) which also serves to preserve the thiosulphate. Less commonly it may also contain other additives e. g. for the hardening of gelatin. There are also non thiosulphate fixers, at least for special purposes. Fixer is used for processing all commonly used films, including black and white films, Kodachrome, and chromogenic films.
Хромогендік пленкалар
Хромогендік фильмдерде қалған күміс "ағартқыш-бекіткіш" деп аталатын химиялық қоспа арқылы алынып тасталуы керек, кейде оны blix деп қысқартады. Бұл қоспаға аммоний тиосульфаты және темір EDTA кіреді, ол – күшті хелаттаушы агент. Бекіткіш күмісті азайтады, содан кейін ол хелаттаушы агентпен ерітіледі.
Жуу және тұрақтандыру
Фиксациядан кейін, эмульсиядан жұмысын тоқтатқан химиялық заттарды кетіру үшін жуу маңызды. Әйтпесе, олар сурет сапасының нашарлауына себеп болады. "Күйіп кетуді" болдырмау үшін қалған күміс негізді суретті кейде басқаша өңдеуге болады.