Акролеин: свойства, применение и токсичность

|Section4=

Acrolein (systematic name: propenal) is the simplest unsaturated aldehyde. It is a colorless liquid with a foul and acrid aroma. The smell of burnt fat (as when cooking oil is heated to its smoke point) is caused by glycerol in the burning fat breaking down into acrolein. It is produced industrially from propene and mainly used as a biocide and a building block to other chemical compounds, such as the amino acid methionine.

Acrolein was first named and characterized as an aldehyde by the Swedish chemist Jöns Jacob Berzelius in 1839. He had been working with it as a thermal degradation product of glycerol, a material used in the manufacture of soap. The name is a contraction of 'acrid' (referring to its pungent smell) and 'oleum' (referring to its oil like consistency). In the 20th century, acrolein became an important intermediate for the industrial production of acrylic acid and acrylic plastics.

Acrolein is a relatively electrophilic compound and a reactive one, hence its high toxicity. It is a good Michael acceptor, hence its useful reaction with thiols. It forms acetals readily, a prominent one being the spirocycle derived from pentaerythritol, diallylidene pentaerythritol. Acrolein participates in many Diels Alder reactions, even with itself. Via Diels Alder reactions, it is a precursor to some commercial fragrances, including lyral, norbornene 2 carboxaldehyde, and myrac aldehyde. during World War I under the name "Papite".

Acrolein is mainly used as a contact herbicide to control submersed and floating weeds, as well as algae, in irrigation canals. It is used at a level of 10 ppm in irrigation and recirculating waters. In the oil and gas industry, it is used as a biocide in drilling waters, as well as a scavenger for hydrogen sulfide and mercaptans. It is also an intermediate in the Skraup synthesis of quinolines. Acrolein will polymerize in the presence of oxygen and in water at concentrations above 22%. The color and texture of the polymer depends on the conditions. The polymer is a clear, yellow solid. In water, it will form a hard, porous plastic. Acrolein has been used as a fixative in preparation of biological specimens for electron microscopy.

Acrolein is toxic and is a strong irritant for the skin, eyes, and nasal passages. Acrolein acts in an immunosuppressive manner and may promote regulatory cells, thereby preventing the generation of allergies on the one hand, but also increasing the risk of cancer. Acrolein was identified as one of the chemicals involved in the 2019 Kim Kim River toxic pollution incident.

Connections exist between acrolein gas in the smoke from tobacco cigarettes and the risk of lung cancer. Acrolein is one of seven toxicants in cigarette smoke that are most associated with respiratory tract carcinogenesis. The mechanism of action of acrolein appears to involve induction of increased reactive oxygen species and DNA damage related to oxidative stress. In terms of the "noncarcinogenic health quotient" for components in cigarette smoke, acrolein dominates, contributing 40 times more than the next component, hydrogen cyanide. The acrolein content in cigarette smoke depends on the type of cigarette and added glycerin, making up to 220 μg acrolein per cigarette. Importantly, while the concentration of the constituents in mainstream smoke can be reduced by filters, this has no significant effect on the composition of the side stream smoke where acrolein usually resides, and which is inhaled by passive smoking. E cigarettes, used normally, only generate "negligible" levels of acrolein (less than 10 μg "per puff").

Cyclophosphamide and ifosfamide treatment results in the production of acrolein. Acrolein produced during cyclophosphamide treatment collects in the urinary bladder and if untreated can cause hemorrhagic cystitis.

Acrolein is a component of reuterin. Reuterin can be produced by gut microbes when glycerol is present. Microbe produced reuterin is a potential resource of acrolein.

The "acrolein test" is for the presence of glycerin or fats. A sample is heated with potassium bisulfate, and acrolein is released if the test is positive. When a fat is heated strongly in the presence of a dehydrating agent such as potassium bisulfate , the glycerol portion of the molecule is dehydrated to form the unsaturated aldehyde, acrolein (CH2=CH–CHO), which has the odor peculiar to burnt cooking grease. More modern methods exist. In the US, EPA methods 603 and 624.1 are designed to measure acrolein in industrial and municipal wastewater streams.