Dodge Custom 880: История Модели (1962-1964)

The only visible cue at the front of the car that was different from the 1961 Dodge was the addition of a horizontal bar across the grille, bisected by Dodge’s new three pointed "Fratzog" emblem in place of the stylized star bar from the 1961 Polara. The 1962 Custom 880 was identical to the Chrysler Newport from the rear, except for Dodge badging. The model name Custom 880 was derived from Dodge’s numerical sub model naming structure that was also used on the Dart and sportier models of the Polara. However, the model designation was not physically present on the car. Only "Dodge" badges on the car's rear quarter panels and decklid were applied. A six way power seat was optional. For the short 1962 run, the Custom 880 was available as a four door sedan, two or four door hardtop, a two door convertible, as well as in six or nine passenger station wagons that featured the Chrysler hardtop (no center or B pillar) body design. Custom 880 production totaled 17,500 for the 1962 model year.

For the 1963 model year, the Custom 880 series included a new base model, the 880, available only as a pillared four door sedan or a station wagon. Chrysler branded cars were redesigned for 1963, leaving the 880s body unique to Dodge, although the car was still produced alongside the now different Chrysler. There was also an optional engine, the two barrel V8. Dodge designers created an entirely new look for the car ahead of the cowl, fronted by a new convex grille in a very long oval shape, which shared visual similarities with the AMC Rambler. Straighter front fenders flanked a hood with a depressed central section featuring the Dodge name in block letters above the grille. The designers integrated the new Chrysler's front bumper into the design. At the rear, there was less change, although the car received restyled taillights. Set in large chromed housings, they were mounted to the carryover quarter panels and imparted a Dodge familial appearance to the rear, as one of Dodge's styling hallmarks of the time was round taillights. The new base model 880 station wagons utilized the pillared body in six and nine passenger models, while the Custom series wagons featured the pillarless hardtop design. With Chrysler no longer using the body and interior trim elements, the Custom 880s were better appointed than during the 1962 model year. A total of 28,200 vehicles were produced in 1963, of which 5,600 were station wagons.

The 880 and Custom 880 received their most significant and final redesign of the 1960 body for the 1964 model year. The rear body contours were squared up with new decklids, wraparound rectangular taillights, and new quarter panels. Four door models received a new roofline that was used on the Chrysler New Yorker until 1962. The grille was also updated featuring a concave design with a central horizontal break spanning the distance between the headlights. The Custom 880s included stainless steel rocker panel trim, foam padded seats, and a grooved stainless steel panel that spanned the distance between the taillights. The Customs, at the top of the 880 line, also received better interior appointments than the base models. The engines remained as they had been in 1963. Because of tooling expenses, station wagon bodies — which were also shared with Chrysler models — did not receive all of the changes applied to non wagon models. Most notably, wagons continued to feature the heavy rear horizontal blade stamping first seen on the 1961 Plymouth wagons. The station wagons continued in both pillared (880) and hardtop (Custom 880) models. However, this would be the final year for the hardtop wagon — Dodge and Chrysler being the last American automotive brands to offer the style. Station wagons also received rectangular taillights that wrapped around the sides of the vehicle. All 880s and Custom 880s received a revised instrument cluster layout, replacing the previous design, which had been in use with little change since 1961. An oil pressure gauge was standard. Front leg room was 41.9 inches. The 880 and Custom 880 received favorable press reviews, especially for their redesign. Sales for 1964 totaled 31,800 vehicles, a record for the model.

The 1965 model year cars were the first to fully incorporate Elwood Engel's influence on Chrysler's overall corporate design themes, although he joined the company in 1961. Gone were the relatively extreme curves and angles that were a legacy of the final Exner styled cars. Engel's design philosophy, which was encouraged by Chrysler chairman Lynn Townsend, took Chrysler's products in the direction of rectilinear geometric angles; rectangular and trapezoidal shapes dominated Dodge's full size designs for the year. The introductions of the 1965 models also allowed Chrysler to rectify its 1962 mistake and reintroduce a full sized Dodge Polara to the public. The "new" Polara took the position formerly held by the 880, with the Custom 880 taking the top trim level. The luxurious new Dodge Monaco, which was available only as a two door hardtop, was the top of the line model produced by Dodge in 1965 and was designed to compete against the Ford Galaxie 500 LTD and Chevrolet Caprice, both new top line luxury models for 1965. An AM/FM radio and a seven position tilt steering wheel were optional. All big Dodges, 880, Monaco, and Polara, now featured the same body and styling. Gone was the 1961 Chrysler design. All Custom 880s came with the standard features found in the Polara and added foam padded seats and stainless steel window frames on station wagons and sedans. Hardtops and convertibles featured all vinyl interiors. Custom 880s also featured a pillared six window "town sedan" body that was unavailable in the Polara series. The series also featured the first Dodge brand "wood" trimmed station wagon since the early 1950s, a look achieved through DI NOC appliqué framed in stainless steel trim. A total of 23,700 Custom 880s, all with V8 engines, were built during the model year. The V8 was replaced by a version of the A more powerful 383 included a four barrel carburetor rated at There was also an optional RB V8, and at the top of the line was the Wedge V8 that was available with a four speed manual transmission.

Dodge discontinued the Custom 880 nameplate at the end of the 1965 model year in the United States. To move its top full size series upscale for 1966, the division adopted the Monaco name for all of the former Custom 880 models, except for the six window sedan, which was discontinued. The original Monaco hardtop added the 500 label for 1966 and marketed as a competitor to the Pontiac Grand Prix.